Methodologies for Assessing Pipe Failure Rates in Advanced Water Cooled Reactors

Methodologies for Assessing Pipe Failure Rates in Advanced Water Cooled Reactors PDF Author: IAEA
Publisher: International Atomic Energy Agency
ISBN: 9201505221
Category : Technology & Engineering
Languages : en
Pages : 183

Get Book Here

Book Description
This publication, which draws upon the outcome of an IAEA coordinated research project, presents methodologies for assessing pipe failure rates in advanced water cooled reactors (WCRs), including a comprehensive review of good practices for the assessment of piping reliability parameters for advanced WCRs. Good practices are those processes and analytical tasks that would be expected in piping reliability analysis in order for the results to be realistic representations of piping structural integrity. This publication builds on technical insights that have been obtained using different methodologies when applied in multiple analytical contexts and responding to the requirements of different national codes and standards. It provides Member States with a strong technical basis for establishing design and plant centric piping reliability parameters for input into probabilistic safety assessment studies, in-service inspection programme development, and operational support. Additionally, an objective evaluation and inter-comparison of methods used in participating Member States is outlined leading to a harmonization of the practices relevant to newly deployable advanced WCRs.

Methodologies for Assessing Pipe Failure Rates in Advanced Water Cooled Reactors

Methodologies for Assessing Pipe Failure Rates in Advanced Water Cooled Reactors PDF Author: IAEA
Publisher: International Atomic Energy Agency
ISBN: 9201505221
Category : Technology & Engineering
Languages : en
Pages : 183

Get Book Here

Book Description
This publication, which draws upon the outcome of an IAEA coordinated research project, presents methodologies for assessing pipe failure rates in advanced water cooled reactors (WCRs), including a comprehensive review of good practices for the assessment of piping reliability parameters for advanced WCRs. Good practices are those processes and analytical tasks that would be expected in piping reliability analysis in order for the results to be realistic representations of piping structural integrity. This publication builds on technical insights that have been obtained using different methodologies when applied in multiple analytical contexts and responding to the requirements of different national codes and standards. It provides Member States with a strong technical basis for establishing design and plant centric piping reliability parameters for input into probabilistic safety assessment studies, in-service inspection programme development, and operational support. Additionally, an objective evaluation and inter-comparison of methods used in participating Member States is outlined leading to a harmonization of the practices relevant to newly deployable advanced WCRs.

Technical Insights from Benchmarking Different Methods for Predicting Pipe Failure Rates in Water Cooled Reactors

Technical Insights from Benchmarking Different Methods for Predicting Pipe Failure Rates in Water Cooled Reactors PDF Author: IAEA.
Publisher:
ISBN: 9781523150014
Category : Benchmarking (Management)
Languages : en
Pages : 0

Get Book Here

Book Description
This publication presents the outcome of an IAEA coordinated research project (CRP) on methodologies for assessing pipe failure rates in advanced water cooled reactors. The goal of the CRP was to provide Member States with a strong technical basis for establishing nuclear power plant piping reliability parameters. To meet this goal two parallel and interrelated activities were carried out. In a first CRP activity, the participating institutions performed a series of benchmark studies. These studies, as described in this publication, were formulated for the purpose of evaluating different methodologies when applied to a common problem. The results were compared, and the reasons for differences were identified. This publication provides a description of the benchmark studies, the participants' individual methodologies applied, and simulations and analyses carried out, an independent synthesis of the results, and the main insights and conclusions from the exercise.

Natural Circulation Phenomena and Modelling for Advanced Water Cooled Reactors

Natural Circulation Phenomena and Modelling for Advanced Water Cooled Reactors PDF Author: International Atomic Energy Agency
Publisher:
ISBN: 9789201274106
Category : Science
Languages : en
Pages : 423

Get Book Here

Book Description
Based on an IAEA coordinated research project focused on the use of passive safety systems and natural circulation to help meet the safety and economic goals of advanced nuclear power plants, this publication includes the identification and definition of the thermo-hydraulic phenomena that affect the reliability of passive safety systems, characterization of each phenomenon, integral tests to examine the passive systems and natural circulation, and a methodology for examining passive system reliability.

Technical Insights from Benchmarking Different Methods for Predicting Pipe Failure Rates in Water Cooled Reactors

Technical Insights from Benchmarking Different Methods for Predicting Pipe Failure Rates in Water Cooled Reactors PDF Author: IAEA
Publisher:
ISBN: 9789201411211
Category :
Languages : en
Pages : 0

Get Book Here

Book Description
This publication presents the outcome of an IAEA coordinated research project (CRP) on methodologies for assessing pipe failure rates in advanced water cooled reactors. The goal of the CRP was to provide Member States with a strong technical basis for establishing nuclear power plant piping reliability parameters. To meet this goal two parallel and interrelated activities were carried out. In a first CRP activity, the participating institutions performed a series of benchmark studies. These studies, as described in this publication, were formulated for the purpose of evaluating different methodologies when applied to a common problem. The results were compared, and the reasons for differences were identified. This publication provides a description of the benchmark studies, the participants' individual methodologies applied, and simulations and analyses carried out, an independent synthesis of the results, and the main insights and conclusions from the exercise.

Pressurized Heavy Water Reactors

Pressurized Heavy Water Reactors PDF Author:
Publisher: Elsevier
ISBN: 0128232595
Category : Science
Languages : en
Pages : 546

Get Book Here

Book Description
Pressurized Heavy Water Reactors: CANDU, the seventh volume in the JSME Series on Thermal and Nuclear Power Generation series, provides a comprehensive and complete review of a single type of reactor in a very accessible and practical way. The book presents the full lifecycle, from design and manufacturing to operation and maintenance, also covering fitness-for-service and long-term operation. It does not relate to any specific vendor-based technology, but rather provides a broad overview of the latest technologies from a variety of active locations which will be of great value to countries invested in developing their own nuclear programs. Including contemporary capabilities and challenges of nuclear technology, the book offers practical solutions to common problems faced, along with the safe and approved processes to reach suitable solutions. Professionals involved in nuclear power plant lifecycle assessment and researchers interested in the development and improvement of nuclear energy technologies will gain a deep understanding of PHWR nuclear reactor physics, chemistry and thermal-hydraulic properties. - Provides a complete reference dedicated to the latest research on Pressurized Heavy Water Reactors and their economic and environmental benefits - Goes beyond CANDU reactors to analyze the popular German and Indian designs, as well as plant design in Korea, Romania, China and Argentina - Spans all phases of the nuclear power plant lifecycle, from design, manufacturing, operation, maintenance and long-term operation

Status of Research and Technology Development for Supercritical Water Cooled Reactors

Status of Research and Technology Development for Supercritical Water Cooled Reactors PDF Author: International Atomic Energy Agency
Publisher: International Atomic Energy Agency
ISBN: 9789201019196
Category : Technology & Engineering
Languages : en
Pages : 74

Get Book Here

Book Description
There is considerable interest in both developing and developed countries in the design of innovative water cooled reactors (WCRs) and, owing to the higher thermal efficiency and significant system simplifications, supercritical water cooled reactors (SWCRs). Compared to conventional WCRs the SCWR concept requires extensive, comprehensive research and development (R&D). Fundamental research in understanding important phenomena has been completed successfully in providing information required for the next step of development. Currently, a few concepts have been assessed as being technical feasible, and several other concepts are under development. These concepts are described in this publication, together with detailed analysis of remaining gaps requiring future R&D.

Review of Fuel Failures in Water Cooled Reactors (2006-2015): IAEA Nuclear Energy Series No. Nf-T-2.5

Review of Fuel Failures in Water Cooled Reactors (2006-2015): IAEA Nuclear Energy Series No. Nf-T-2.5 PDF Author: International Atomic Energy Agency
Publisher:
ISBN: 9789201043191
Category : Business & Economics
Languages : en
Pages : 65

Get Book Here

Book Description
This updated version of Nuclear Energy Series NF-T-2.1 provides information on all aspects of fuel failures in current nuclear power plant operations.

Progress in Methodologies for the Assessment of Passive Safety System Reliability in Advanced Reactors

Progress in Methodologies for the Assessment of Passive Safety System Reliability in Advanced Reactors PDF Author: International Atomic Energy Agency
Publisher: IAEA Tecdoc
ISBN: 9789201086143
Category : Science
Languages : en
Pages : 223

Get Book Here

Book Description
This publication summarizes the results of an IAEA coordinated research project on the development of advanced methodologies for the assessment of passive safety system performance in advanced reactors. This includes discussions on various methodologies to assess the performance of passive engineered safety features in innovative small reactors, including the Indian AHWR 300 LEU and the Argentinian CAREM25. The publication focuses on the different reliability assessment approaches, methodologies, analysis and evaluation of the results and technical challenges. It provides the insights resulting from the analysis on the technical issues associated with assessing the reliability of passive systems in the context of nuclear safety and probabilistic safety analysis. A viable path towards the implementation of the research efforts in the related areas is also delineated.

Liquid Metal Cooled Reactors

Liquid Metal Cooled Reactors PDF Author: International Atomic Energy Agency
Publisher:
ISBN: 9789201079077
Category : Liquid metal cooled reactors
Languages : en
Pages : 0

Get Book Here

Book Description
Presents a survey of worldwide experience gained with fast breeder reactor design, development and operation. Coverage includes state of the art of liquid metal fast reactor development; lead-bismuth cooled (LBC) ship reactor operation experience and LBC fast power reactor development; and treatment and disposal of spent sodium.

Project Management in Nuclear Power Plant Construction

Project Management in Nuclear Power Plant Construction PDF Author: International Atomic Energy Agency
Publisher:
ISBN: 9789201222107
Category : Medical
Languages : en
Pages : 124

Get Book Here

Book Description
This publication provides guidance on project management from the preparatory phase to plant turnover to commissioning of nuclear power plants. The guidelines and experiences described will enable project managers to obtain better performance in nuclear power plant construction.