Mechanical Stability of the CMS Strip Tracker Measured with a Laser Alignment System

Mechanical Stability of the CMS Strip Tracker Measured with a Laser Alignment System PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
The CMS tracker consists of 206 square meters of silicon strip sensors assembled on carbon fibre composite structures and is designed for operation in the temperature range from -25 to +25 degrees C. The mechanical stability of tracker components during physics operation was monitored with a few micron resolution using a dedicated laser alignment system as well as particle tracks from cosmic rays and hadron-hadron collisions. During the LHC operational period of 2011-2013 at stable temperatures, the components of the tracker were observed to experience relative movements of less than 30 microns. In addition, temperature variations were found to cause displacements of tracker structures of about 2 microns/degree C, which largely revert to their initial positions when the temperature is restored to its original value.

Mechanical Stability of the CMS Strip Tracker Measured with a Laser Alignment System

Mechanical Stability of the CMS Strip Tracker Measured with a Laser Alignment System PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
The CMS tracker consists of 206 square meters of silicon strip sensors assembled on carbon fibre composite structures and is designed for operation in the temperature range from -25 to +25 degrees C. The mechanical stability of tracker components during physics operation was monitored with a few micron resolution using a dedicated laser alignment system as well as particle tracks from cosmic rays and hadron-hadron collisions. During the LHC operational period of 2011-2013 at stable temperatures, the components of the tracker were observed to experience relative movements of less than 30 microns. In addition, temperature variations were found to cause displacements of tracker structures of about 2 microns/degree C, which largely revert to their initial positions when the temperature is restored to its original value.

Alignment of the CMS Silicon Strip Tracker During Stand-alone Commissioning

Alignment of the CMS Silicon Strip Tracker During Stand-alone Commissioning PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 7002

Get Book Here

Book Description
The results of the CMS tracker alignment analysis are presented using the data from cosmic tracks, optical survey information, and the laser alignment system at the Tracker Integration Facility at CERN. During several months of operation in the spring and summer of 2007, about five million cosmic track events were collected with a partially active CMS Tracker. This allowed us to perform first alignment of the active silicon modules with the cosmic tracks using three different statistical approaches; validate the survey and laser alignment system performance; and test the stability of Tracker structures under various stresses and temperatures ranging from +15C to -15C. Comparison with simulation shows that the achieved alignment precision in the barrel part of the tracker leads to residual distributions similar to those obtained with a random misalignment of 50 (80) microns in the outer (inner) part of the barrel.

Evolution of Silicon Sensor Technology in Particle Physics

Evolution of Silicon Sensor Technology in Particle Physics PDF Author: Frank Hartmann
Publisher: Springer
ISBN: 331964436X
Category : Science
Languages : en
Pages : 386

Get Book Here

Book Description
This informative monograph describes the technological evolution of silicon detectors and their impact on high energy particle physics. The author here marshals his own first-hand experience in the development and also the realization of the DELPHI, CDF II and the CMS tracking detector. The basic principles of small strip- and pixel-detectors are presented and also the final large-scale applications. The Evolution of Silicon Detector Technology acquaints readers with the manifold challenges involving the design of sensors and pushing this technology to the limits. The expert will find critical information that is so far only available in various slide presentation scattered over the world wide web. This practical introduction of silicon sensor technology and its day to day life in the lab also offers many examples to illustrate problems and their solutions over several detector generations. The new edition gives a detailed overview of the silicon sensor technology used at the LHC, from basic principles to actual implementation to lessons learned.

Inclusive b Jet Production in Proton-Proton Collisions

Inclusive b Jet Production in Proton-Proton Collisions PDF Author: Patrick L.S. Connor
Publisher: Springer Nature
ISBN: 3030343839
Category : Science
Languages : en
Pages : 325

Get Book Here

Book Description
^ 74 GeV and |y| 2.4; the b jets must contain a B hadron. The measurement has significant statistics up to p T ∼ O(TeV). Advanced methods of unfolding are performed to extract the signal. It is found that fixed-order calculations with underlying event describe the measurement well.

Performance Studies of the CMS Strip Tracker Before Installation

Performance Studies of the CMS Strip Tracker Before Installation PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 6010

Get Book Here

Book Description
In March 2007 the assembly of the Silicon Strip Tracker was completed at the Tracker Integration Facility at CERN. Nearly 15% of the detector was instrumented using cables, fiber optics, power supplies, and electronics intended for the operation at the LHC. A local chiller was used to circulate the coolant for low temperature operation. In order to understand the efficiency and alignment of the strip tracker modules, a cosmic ray trigger was implemented. From March through July 4.5 million triggers were recorded. This period, referred to as the Sector Test, provided practical experience with the operation of the Tracker, especially safety, data acquisition, power, and cooling systems. This paper describes the performance of the strip system during the Sector Test, which consisted of five distinct periods defined by the coolant temperature. Significant emphasis is placed on comparisons between the data and results from Monte Carlo studies.

Expected Measurement of the Z Production Rate with the CMS Detector and Simulation of the Tracker Laser Alignment System

Expected Measurement of the Z Production Rate with the CMS Detector and Simulation of the Tracker Laser Alignment System PDF Author: Maarten Thomas
Publisher:
ISBN:
Category :
Languages : en
Pages : 0

Get Book Here

Book Description


Advanced Technology and Particle Physics

Advanced Technology and Particle Physics PDF Author: Emilio Borchi
Publisher:
ISBN:
Category : Calorimetry
Languages : en
Pages : 592

Get Book Here

Book Description


The Silicon Strip Tracker for the CMS Experiment at LHC

The Silicon Strip Tracker for the CMS Experiment at LHC PDF Author: Roberto Della Marina
Publisher:
ISBN:
Category :
Languages : en
Pages : 232

Get Book Here

Book Description


Nuclear Physics

Nuclear Physics PDF Author:
Publisher:
ISBN:
Category : Nuclear physics
Languages : en
Pages : 590

Get Book Here

Book Description


Particle Physics Reference Library

Particle Physics Reference Library PDF Author: Christian W. Fabjan
Publisher: Springer Nature
ISBN: 3030353184
Category : Elementary particles (Physics).
Languages : en
Pages : 1083

Get Book Here

Book Description
This second open access volume of the handbook series deals with detectors, large experimental facilities and data handling, both for accelerator and non-accelerator based experiments. It also covers applications in medicine and life sciences. A joint CERN-Springer initiative, the "Particle Physics Reference Library" provides revised and updated contributions based on previously published material in the well-known Landolt-Boernstein series on particle physics, accelerators and detectors (volumes 21A, B1,B2,C), which took stock of the field approximately one decade ago. Central to this new initiative is publication under full open access