Mechanical Characterization of Unnotched SCS6/Ti-15-3 Metal Matrix Composites at Room Temperature PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Mechanical Characterization of Unnotched SCS6/Ti-15-3 Metal Matrix Composites at Room Temperature PDF full book. Access full book title Mechanical Characterization of Unnotched SCS6/Ti-15-3 Metal Matrix Composites at Room Temperature by AL. Highsmith. Download full books in PDF and EPUB format.
Author: AL. Highsmith
Publisher:
ISBN:
Category : Ceramic-matrix composites
Languages : en
Pages : 26
Get Book Here
Book Description
The Ti-15-3 metal matrix composites containing silicon carbide (SCS6) fibers, in five different lay-ups, have been tested at room temperature to determine static strengths and mechanical properties. Experimental data and predicted values of the laminate properties and strengths showed good correlation. The off-axis laminate plies (that is 90° and 45°) suffered fiber/matrix interface failures at stress levels as low as 20 ksi, thus significantly affecting the mechanical properties of the laminate. Edge replicas were used to verify the fiber/matrix separations. Microscopic examinations determined that the fiber/matrix failures were occurring in the titanium/silicon reaction layer. Fatigue tests were performed on unnotched specimens to determine the number of cycles to failure versus cyclic stress level. It was found that the stress in the 0° fiber could be used to correlate the fatigue life of different laminates containing 0° phes.
Author: AL. Highsmith
Publisher:
ISBN:
Category : Ceramic-matrix composites
Languages : en
Pages : 26
Get Book Here
Book Description
The Ti-15-3 metal matrix composites containing silicon carbide (SCS6) fibers, in five different lay-ups, have been tested at room temperature to determine static strengths and mechanical properties. Experimental data and predicted values of the laminate properties and strengths showed good correlation. The off-axis laminate plies (that is 90° and 45°) suffered fiber/matrix interface failures at stress levels as low as 20 ksi, thus significantly affecting the mechanical properties of the laminate. Edge replicas were used to verify the fiber/matrix separations. Microscopic examinations determined that the fiber/matrix failures were occurring in the titanium/silicon reaction layer. Fatigue tests were performed on unnotched specimens to determine the number of cycles to failure versus cyclic stress level. It was found that the stress in the 0° fiber could be used to correlate the fatigue life of different laminates containing 0° phes.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 40
Get Book Here
Book Description
Author: WS. Johnson
Publisher:
ISBN:
Category : Composite materials
Languages : en
Pages : 17
Get Book Here
Book Description
TI-15-3 reinforced with SCS-6 silicon carbide fibers, in five different lay-ups, was tested at 650°C to determine monotonic and fatigue strengths, basic mechanical properties, and damage initiation and progression. The elevated temperature results were compared to those obtained at room temperature. Analytical predictions were made of the monotonic stress-strain response as well as cyclic stress-strain hysteresis. The fiber reinforcement was found to increase significantly the static and fatigue strengths of the laminates over those of the matrix material at elevated temperature; the increase was insignificant at room temperature. Initial damage, in either the fibers or the matrix, was partitioned as a function of the life and applied strain range in the constituents. High strains and short lives resulted in multiple fiber failure with no signs of matrix fatigue cracking. Low strains and long lives resulted in extensive matrix cracking and no fiber breaks away from the fracture surface. At 650°C, the matrix was too weak to cause fiber-matrix interface failure before matrix yielding. Laminate fatigue lives were hypothesized to be a function of the 0° fiber stress. More scatter was found in the 0° fiber stress versus high temperature fatigue life data than in the room temperature data. An initial unloading modulus that was greater than the initial loading modulus was observed in the elevated temperature fatigue tests.
Author: George Voyiadjis
Publisher: Elsevier
ISBN: 1483290441
Category : Technology & Engineering
Languages : en
Pages : 358
Get Book Here
Book Description
This book contains fifteen papers based on the presentations made at the symposium on "Inelasticity and Micromechanics of Metal Matrix Composites" held at the University of Washington, USA, in mid-1994. The papers represent the most recent work conducted on inelasticity and micromechanics of metal matrix composites. The book is divided into two parts: Part I deals with the study of inelastic deformation in metal matrix composites, while Part II tackles the micromechanical aspects of metal matrix composites. The articles discuss different aspects of these two topics ranging from purely theoretical treatments to extensive experimental investigations. Many of the papers are by prominent researchers working in this area.
Author: Shankar Mall
Publisher: CRC Press
ISBN: 1000725472
Category : Technology & Engineering
Languages : en
Pages : 482
Get Book Here
Book Description
A review and summary of advancements related to mechanical behavior and related mechanics issues of titanium matrix composites (TMCs), a class of high-temperature materials useful in the propulsion and airframe components in advanced aerospace systems. After an introduction to TMCs, different authors review and summarise the advancements related to mechanical behavior and related mechanics issues of TMCs.
Author: International Conference on Composite Materials
Publisher: Woodhead Publishing
ISBN: 9781855731349
Category : Technology & Engineering
Languages : en
Pages : 940
Get Book Here
Book Description
Author: Amer Society Composi
Publisher: CRC Press
ISBN: 9781566763769
Category : Technology & Engineering
Languages : en
Pages : 670
Get Book Here
Book Description
Conference proceedings from the American Society of Composites, Tenth Technology Proceedings: Composite Materials, Mechanics and Processing on October 18-20, 1995 at the Miramar Sheraton Hotel Santa Monica, California
Author: W. Steven Johnson
Publisher: ASTM International
ISBN: 0803120397
Category : Metallic composites
Languages : en
Pages : 625
Get Book Here
Book Description
Papers presented at the March 1994 symposium are organized into five sections that progress from basic understanding of mechanical damage mechanisms and environmental effects to life prediction methodology. Five papers discuss the interplay between interfacial strength, residual thermal stresses, an
Author: Gary R. Halford
Publisher:
ISBN:
Category : Metallic composites
Languages : en
Pages : 20
Get Book Here
Book Description
Author: Huseyin Sehitoglu
Publisher: ASTM International
ISBN: 0803118716
Category : AIIoys
Languages : en
Pages : 259
Get Book Here
Book Description
