Author: J.M. Delhaye
Publisher: Springer Science & Business Media
ISBN: 364282112X
Category : Science
Languages : en
Pages : 756
Book Description
A IUTAM symposium on "Measuring Techniques in Gas-Liquid Two Phase Flows" was held on July 5-8, 1983 in Nancy, France. This topic in cluded instrumentation for steam-water and liquid-vapor flows but strictly excluded measuring techniques for gas or liquid flows with solid particles. The top priority in the paper selection was given to presentations of new methods which had been substantiated by theoretical modeling, calibration tests and comparison tests with other techniques. Examples of experimental resul ts obtained with the proposed instrumentation had to be displayed. However the interpretation of these results in terms of two-phase flow or heat transfer modeling did not fall wi thin the scope of the meeting. Thirty four papers were presented during the Symposium and 79 participants coming from Canada, European countries, Japan and the United States attended the sessions. They represented not only Universities but also state agencies and private companies. After the meeting each paper was peer-reviewed by at least three referees. The Editors of this Procee dings Volume are pleased to extend their deep gratitude to the following reviewers: J.L. Achard, R.J. Adrian, B. Azzopardi, J.A. Boure, G. Costigan, M. Courtaud, A.E. Dukler, F. Durst, J.R. Fincke, G. Gouesbet, P. Griffith, T.J. Hanratty, A. Hawighorst, T.R. Heidrick, G. Hetsroni, Y.Y. Hsu, M.
Measuring Techniques in Gas-Liquid Two-Phase Flows
Author: J.M. Delhaye
Publisher: Springer Science & Business Media
ISBN: 364282112X
Category : Science
Languages : en
Pages : 756
Book Description
A IUTAM symposium on "Measuring Techniques in Gas-Liquid Two Phase Flows" was held on July 5-8, 1983 in Nancy, France. This topic in cluded instrumentation for steam-water and liquid-vapor flows but strictly excluded measuring techniques for gas or liquid flows with solid particles. The top priority in the paper selection was given to presentations of new methods which had been substantiated by theoretical modeling, calibration tests and comparison tests with other techniques. Examples of experimental resul ts obtained with the proposed instrumentation had to be displayed. However the interpretation of these results in terms of two-phase flow or heat transfer modeling did not fall wi thin the scope of the meeting. Thirty four papers were presented during the Symposium and 79 participants coming from Canada, European countries, Japan and the United States attended the sessions. They represented not only Universities but also state agencies and private companies. After the meeting each paper was peer-reviewed by at least three referees. The Editors of this Procee dings Volume are pleased to extend their deep gratitude to the following reviewers: J.L. Achard, R.J. Adrian, B. Azzopardi, J.A. Boure, G. Costigan, M. Courtaud, A.E. Dukler, F. Durst, J.R. Fincke, G. Gouesbet, P. Griffith, T.J. Hanratty, A. Hawighorst, T.R. Heidrick, G. Hetsroni, Y.Y. Hsu, M.
Publisher: Springer Science & Business Media
ISBN: 364282112X
Category : Science
Languages : en
Pages : 756
Book Description
A IUTAM symposium on "Measuring Techniques in Gas-Liquid Two Phase Flows" was held on July 5-8, 1983 in Nancy, France. This topic in cluded instrumentation for steam-water and liquid-vapor flows but strictly excluded measuring techniques for gas or liquid flows with solid particles. The top priority in the paper selection was given to presentations of new methods which had been substantiated by theoretical modeling, calibration tests and comparison tests with other techniques. Examples of experimental resul ts obtained with the proposed instrumentation had to be displayed. However the interpretation of these results in terms of two-phase flow or heat transfer modeling did not fall wi thin the scope of the meeting. Thirty four papers were presented during the Symposium and 79 participants coming from Canada, European countries, Japan and the United States attended the sessions. They represented not only Universities but also state agencies and private companies. After the meeting each paper was peer-reviewed by at least three referees. The Editors of this Procee dings Volume are pleased to extend their deep gratitude to the following reviewers: J.L. Achard, R.J. Adrian, B. Azzopardi, J.A. Boure, G. Costigan, M. Courtaud, A.E. Dukler, F. Durst, J.R. Fincke, G. Gouesbet, P. Griffith, T.J. Hanratty, A. Hawighorst, T.R. Heidrick, G. Hetsroni, Y.Y. Hsu, M.
Modelling and Experimentation in Two-Phase Flow
Author: Volfango Bertola
Publisher: Springer
ISBN: 3709125383
Category : Technology & Engineering
Languages : en
Pages : 433
Book Description
This is an up-to-date review of recent advances in the study of two-phase flows, with focus on gas-liquid flows, liquid-liquid flows, and particle transport in turbulent flows. The book is divided into several chapters, which after introducing basic concepts lead the reader through a more complex treatment of the subjects. The reader will find an extensive review of both the older and the more recent literature, with abundance of formulas, correlations, graphs and tables. A comprehensive (though non exhaustive) list of bibliographic references is provided at the end of each chapter. The volume is especially indicated for researchers who would like to carry out experimental, theoretical or computational work on two-phase flows, as well as for professionals who wish to learn more about this topic.
Publisher: Springer
ISBN: 3709125383
Category : Technology & Engineering
Languages : en
Pages : 433
Book Description
This is an up-to-date review of recent advances in the study of two-phase flows, with focus on gas-liquid flows, liquid-liquid flows, and particle transport in turbulent flows. The book is divided into several chapters, which after introducing basic concepts lead the reader through a more complex treatment of the subjects. The reader will find an extensive review of both the older and the more recent literature, with abundance of formulas, correlations, graphs and tables. A comprehensive (though non exhaustive) list of bibliographic references is provided at the end of each chapter. The volume is especially indicated for researchers who would like to carry out experimental, theoretical or computational work on two-phase flows, as well as for professionals who wish to learn more about this topic.
Measuring techniques in gas- liquid two- phase flows
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Book Description
Magnetohydrodynamics
Author: Sergei S. Molokov
Publisher: Springer Science & Business Media
ISBN: 1402048335
Category : Science
Languages : en
Pages : 408
Book Description
This book revises the evolution of ideas in various branches of magnetohydrodynamics (astrophysics, earth and solar dynamos, pinch, MHD turbulence and liquid metals) and reviews current trends and challenges. Uniquely, it contains the review articles on the development of the subject by pioneers in the field as well as leading experts, not just in one, but in various branches of magnetohydrodynamics, such as liquid metals, astrophysics, dynamo and pinch.
Publisher: Springer Science & Business Media
ISBN: 1402048335
Category : Science
Languages : en
Pages : 408
Book Description
This book revises the evolution of ideas in various branches of magnetohydrodynamics (astrophysics, earth and solar dynamos, pinch, MHD turbulence and liquid metals) and reviews current trends and challenges. Uniquely, it contains the review articles on the development of the subject by pioneers in the field as well as leading experts, not just in one, but in various branches of magnetohydrodynamics, such as liquid metals, astrophysics, dynamo and pinch.
Multiphase Science and Technology
Author: G.F. Hewitt
Publisher: Springer Science & Business Media
ISBN: 3662016575
Category : Science
Languages : en
Pages : 495
Book Description
This is the second volume of Multiphase Science and TechnoJogy, a new international series of books intended to provide authoritative overviews of im portant areas in multiphase systems. The alm is to have systematic and tutorial presentations of the state of knowledge in various areas. The objective of the chapters is to allow the nonspecialist reader to gain an up-to-date idea of the present state of development in a given subject. The response to Volume 1 of the se ries has been very positive, and we believe that the present volume will be equally weil received. Volume 1 was concerned entirely with gas-liquid systems, and the first four chapters of the present volume also relate to such systems. However, the inten tion of the se ries is to cover a wide range of multiphase systems, and we are, therefore, pleased to include in the present volume chapters that refer to liquid liquid and gas-solid multiphase flows, respectively. The first chapter in the present volume is by Professor A. E. Dukler of the University of Houston, Texas, and Professor Y. Taitel of Tel-Aviv University, Israel.
Publisher: Springer Science & Business Media
ISBN: 3662016575
Category : Science
Languages : en
Pages : 495
Book Description
This is the second volume of Multiphase Science and TechnoJogy, a new international series of books intended to provide authoritative overviews of im portant areas in multiphase systems. The alm is to have systematic and tutorial presentations of the state of knowledge in various areas. The objective of the chapters is to allow the nonspecialist reader to gain an up-to-date idea of the present state of development in a given subject. The response to Volume 1 of the se ries has been very positive, and we believe that the present volume will be equally weil received. Volume 1 was concerned entirely with gas-liquid systems, and the first four chapters of the present volume also relate to such systems. However, the inten tion of the se ries is to cover a wide range of multiphase systems, and we are, therefore, pleased to include in the present volume chapters that refer to liquid liquid and gas-solid multiphase flows, respectively. The first chapter in the present volume is by Professor A. E. Dukler of the University of Houston, Texas, and Professor Y. Taitel of Tel-Aviv University, Israel.
Measuring Techniques in Gas-liquid Two-phase Flows
Author: G. Cognet
Publisher:
ISBN:
Category : Fluid dynamic measurements
Languages : en
Pages : 746
Book Description
Publisher:
ISBN:
Category : Fluid dynamic measurements
Languages : en
Pages : 746
Book Description
Advances in Fluid and Thermal Engineering
Author: Basant Singh Sikarwar
Publisher: Springer Nature
ISBN: 9811601593
Category : Science
Languages : en
Pages : 891
Book Description
This book comprises the select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). This volume focuses on current research in fluid and thermal engineering and covers topics such as heat transfer enhancement and heat transfer equipment, heat transfer in nuclear applications, microscale and nanoscale transport, multiphase transport and phase change, multi-mode heat transfer, numerical methods in fluid mechanics and heat transfer, refrigeration and air conditioning, thermodynamics, space heat transfer, transport phenomena in porous media, turbulent transport, theoretical and experimental fluid dynamics, flow measurement techniques and instrumentation, computational fluid dynamics, fluid machinery, turbo machinery and fluid power. Given the scope of its contents, this book will be interesting for students, researchers as well as industry professionals.
Publisher: Springer Nature
ISBN: 9811601593
Category : Science
Languages : en
Pages : 891
Book Description
This book comprises the select proceedings of the International Conference on Future Learning Aspects of Mechanical Engineering (FLAME 2020). This volume focuses on current research in fluid and thermal engineering and covers topics such as heat transfer enhancement and heat transfer equipment, heat transfer in nuclear applications, microscale and nanoscale transport, multiphase transport and phase change, multi-mode heat transfer, numerical methods in fluid mechanics and heat transfer, refrigeration and air conditioning, thermodynamics, space heat transfer, transport phenomena in porous media, turbulent transport, theoretical and experimental fluid dynamics, flow measurement techniques and instrumentation, computational fluid dynamics, fluid machinery, turbo machinery and fluid power. Given the scope of its contents, this book will be interesting for students, researchers as well as industry professionals.
Multiphase Flow And Heat Transfer
Author: Xuejun Chen
Publisher: CRC Press
ISBN: 9781560320500
Category : Heat
Languages : en
Pages : 734
Book Description
These essays present the latest international research results in the field of multiphase flow and heat transfer. They are based on papers presented at the "Second International Symposium on Multiphase Flow and Heat Transfer" conducted in China in 1989.
Publisher: CRC Press
ISBN: 9781560320500
Category : Heat
Languages : en
Pages : 734
Book Description
These essays present the latest international research results in the field of multiphase flow and heat transfer. They are based on papers presented at the "Second International Symposium on Multiphase Flow and Heat Transfer" conducted in China in 1989.
Measurement of Two Phase Flow Parameters
Author: Geoffrey Frederick Hewitt
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 300
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 300
Book Description
Two-Phase Gas-Liquid Flow in Pipes with Different Orientations
Author: Afshin J. Ghajar
Publisher: Springer Nature
ISBN: 3030416267
Category : Science
Languages : en
Pages : 136
Book Description
This book provides design engineers using gas-liquid two-phase flow in different industrial applications the necessary fundamental understanding of the two-phase flow variables. Two-phase flow literature reports a plethora of correlations for determination of flow patterns, void fraction, two- phase pressure drop and non-boiling heat transfer correlations. However, the validity of a majority of these correlations is restricted over a narrow range of two -phase flow conditions. Consequently, it is quite a challenging task for the end user to select an appropriate correlation/model for the type of two-phase flow under consideration. Selection of a correct correlation also requires some fundamental understanding of the two-phase flow physics and the underlying principles/assumptions/limitations associated with these correlations. Thus, it is of significant interest for a design engineer to have knowledge of the flow patterns and their transitions and their influence on two-phase flow variables. To address some of these issues and facilitate selection of appropriate two-phase flow models, this volume presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommend some of the well scrutinized modeling techniques.
Publisher: Springer Nature
ISBN: 3030416267
Category : Science
Languages : en
Pages : 136
Book Description
This book provides design engineers using gas-liquid two-phase flow in different industrial applications the necessary fundamental understanding of the two-phase flow variables. Two-phase flow literature reports a plethora of correlations for determination of flow patterns, void fraction, two- phase pressure drop and non-boiling heat transfer correlations. However, the validity of a majority of these correlations is restricted over a narrow range of two -phase flow conditions. Consequently, it is quite a challenging task for the end user to select an appropriate correlation/model for the type of two-phase flow under consideration. Selection of a correct correlation also requires some fundamental understanding of the two-phase flow physics and the underlying principles/assumptions/limitations associated with these correlations. Thus, it is of significant interest for a design engineer to have knowledge of the flow patterns and their transitions and their influence on two-phase flow variables. To address some of these issues and facilitate selection of appropriate two-phase flow models, this volume presents a succinct review of the flow patterns, void fraction, pressure drop and non-boiling heat transfer phenomenon and recommend some of the well scrutinized modeling techniques.