IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials PDF full book. Access full book title IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials by André Pineau. Download full books in PDF and EPUB format.
Author: André Pineau
Publisher: Springer Science & Business Media
ISBN: 9400917562
Category : Technology & Engineering
Languages : en
Pages : 442
Get Book Here
Book Description
The IUT AM Symposium on "Micromechanics of Plasticity and Damage of Multiphase Materials" was held in Sevres, Paris, France, 29 August - 1 September 1995. The Symposium was attended by 83 persons from 18 countries. In addition 17 young French students attended the meeting. During the 4 day meeting, a total of 55 papers were presented, including 24 papers in the poster sessions. The meeting was divided into 7 oral and 3 poster sessions. The 7 oral sessions were the following: - Plasticity and Viscoplasticity I and II; - Phase transformations; - Damage I and II; - Statistical and geometrical aspects; - Cracks and interfaces. Each poster session was introduced by a Rapporteur, as follows: - Session I (Plasticity and Viscoplasticity): G. Cailletaud; - Session 2 (Damage): D. Franc;:ois; - Session 3 (Phase transformation; statistical and geometrical aspects): D. Jeulin. The main purpose of the Symposium was the discussion of the state of the art in the development of micromechanical models used to predict the macroscopic mechanical behaviour of mUltiphase solid materials. These materials consist of at least two chemically different phases, present either initially or formed during plastic deformation, when a strain-induced phase transformation takes place. One session was devoted to the latter case. Continuously strengthened composite materials, containing long fibers, were out of the scope of the Symposium.
Author: André Pineau
Publisher: Springer Science & Business Media
ISBN: 9400917562
Category : Technology & Engineering
Languages : en
Pages : 442
Get Book Here
Book Description
The IUT AM Symposium on "Micromechanics of Plasticity and Damage of Multiphase Materials" was held in Sevres, Paris, France, 29 August - 1 September 1995. The Symposium was attended by 83 persons from 18 countries. In addition 17 young French students attended the meeting. During the 4 day meeting, a total of 55 papers were presented, including 24 papers in the poster sessions. The meeting was divided into 7 oral and 3 poster sessions. The 7 oral sessions were the following: - Plasticity and Viscoplasticity I and II; - Phase transformations; - Damage I and II; - Statistical and geometrical aspects; - Cracks and interfaces. Each poster session was introduced by a Rapporteur, as follows: - Session I (Plasticity and Viscoplasticity): G. Cailletaud; - Session 2 (Damage): D. Franc;:ois; - Session 3 (Phase transformation; statistical and geometrical aspects): D. Jeulin. The main purpose of the Symposium was the discussion of the state of the art in the development of micromechanical models used to predict the macroscopic mechanical behaviour of mUltiphase solid materials. These materials consist of at least two chemically different phases, present either initially or formed during plastic deformation, when a strain-induced phase transformation takes place. One session was devoted to the latter case. Continuously strengthened composite materials, containing long fibers, were out of the scope of the Symposium.
Author: Yehia A. Bahei-El-Din
Publisher: Springer Science & Business Media
ISBN: 0306469359
Category : Technology & Engineering
Languages : en
Pages : 327
Get Book Here
Book Description
The field of composite materials has seen substantial development in the past decade, New composite systems are being continually developed for various applications. Among such systems are metal, intermetallic, and superalloy matrix composites, carbon-carbon composites as well as polymer matrix composites. At the same time, a new discipline has emerged of active or smart materials, which are often constructed as composite or heterogeneous media and structures. One unifying theme in these diverse systems is the influence that uncoupled and coupled eigenfields or transformation fields exert on the various types of overall response, as well as on the respective phase responses. Problems of this kind are currently considered by different groups which may not always appreciate the similarities of the problems involved. The purpose of the IUTAM Symposium on Transformation Problems in Composite and Active Materials held in Cairo, Egypt from March 10 to 12, 1997 was to bring together representatives of the different groups so that they may interact and explore common aspects of these seemingly different problem areas. New directions in micromechanics research in both composite and active materials were also explored in the symposium. Specifically, invited lectures in the areas of inelastic behavior of composite materials, shape memory effects, functionally graded materials, transformation problems in composite structures, and adaptive structures were delivered and discussed during the three-day meeting. This book contains the printed contributions to the IUTAM Symposium.
Author: Christian Miehe
Publisher: Springer Science & Business Media
ISBN: 9401702977
Category : Technology & Engineering
Languages : en
Pages : 487
Get Book Here
Book Description
The steady increase in computational power induces an equally steady increase in the complexity of the engineering models and associated computer codes. This particularly affects the modeling of the mechanical response of materials. Material behavior is nowadays modeled in the strongly nonlinear range by tak ing into account finite strains, complex hysteresis effects, fracture phenomena and multiscale features. Progress in this field is of fundamental importance for many engineering disciplines, especially those concerned with material testing, safety, reliability and serviceability analyses of engineering structures. In recent years many important achievements have been made in the field of the theoretical formulation, the mathematical analysis and the numerical im plementation of deformation processes in solids. Computational methods and simulation techniques today play a central role in advancing the understanding of complex material behavior. Research in the field of "ComputationalMechan ics of Materials" is concerned with the development of mathematical models and numerical solution techniques for the simulation of material response. It is a very broad interdisciplinary field of science with inputs from traditional fields such as Applied Mechanics, Applied Mathematics, Materials Science, Solid State Physics and Information Technology. The intention of the IUTAM Symposium "Computational Mechanics of Solid Materials at Large Strains", held at the University of Stuttgart, Germany, from August 20-24, 200I, was to give a state of the art and a survey about recent developments in this field and to create perspectives for future research trends.
Author: Tomasz Sadowski
Publisher: Springer Science & Business Media
ISBN: 1402045662
Category : Science
Languages : en
Pages : 295
Get Book Here
Book Description
Integrating macroscopic properties with observations at lower levels, this book details advances in multiscale modelling and analysis pertaining to classes of composites which either have a wider range of relevant microstructural scales, such as metals, or do not have a very well-defined microstructure, e.g. cementitious or ceramic composites. The IUTAM symposia proceedings provide a platform for extensive further discussion and research.
Author: F. Pfeiffer
Publisher: Springer Science & Business Media
ISBN: 9780792360308
Category : Technology & Engineering
Languages : en
Pages : 360
Get Book Here
Book Description
Multibody dynamics started with the ideas of Jacob and Daniel Bernoul li and later on with d'Alembert's principle. In establishing a solution for the problem of the center of oscillation for a two-mass-pendulum Jacob Ber noulli spoke about balancing the profit-and-Ioss account with respect to the motion of the two masses. Daniel Bernoulli extended these ideas to a chain pendulum and called forces not contributing to the motion "lost forces", thus being already very close to d'Alembert's principle. D'Alembert considered a "system of bodies, which are interconnected in some arbitrary way. " He suggested separating the motion into two parts, one moving, the other being at rest. In modern terms, or at least in terms being applied in engineering mechanics, this means that the forces acting on a system of bodies are split into active and passive forces. Active forces generate motion, passive forces do not; they are a result of constraints. This interpretation of d'Alembert's principle is due to Lagrange and up to now has been the basis of multi body dynamics (D' Alembert, Traite de Dynamique, 1743; Lagrange, Mecanique Analytique, 1811). Thus, multibody dynamics started in France. During the nineteenth century there were few activities in the multi body field even though industry offered plenty of possible applications and famous re presentatives of mechanics were aware of the problems related to multibody dynamics. Poisson in his "Traite de Mecanique" (Paris 1833) gave an im pressive description of these problems, including impacts and friction.
Author: F.J. Fahy
Publisher: Springer Science & Business Media
ISBN: 9780792354574
Category : Technology & Engineering
Languages : en
Pages : 400
Get Book Here
Book Description
This volume is a record of the proceedings of the Symposium on Statistical Energy Analysis (SEA) held at the University of Southampton in July 1997 which was held under the auspices of the International Union of Theoretical and Applied Mechanic~. Theoretical SEA is form of modelling the vibrational and acoustical behaviour of complex mechanical systems which has undergone a long period of gestation before recent maturation into a widely used engineering design and analysis tool which is supported by a rapidly growing supply of commercial software. SEA also provides a framework for associated experimental measurement procedures, data analysis and interpretation. Under the guidance of the members of a distinguished International Scientific Committee, participants were individually invited from the broad spectrum of 'SEAfarers', including academics, consultants, industrial engineers, software developers and research students. The Symposium aimed to reflect the balance of world-wide activity in SEA, although some eminent members of the SEA community were, sadly, unable to attend. In particular, Professor Richard Lyon and Dr Gideon Maidanik, two of the principal originators of SEA, were sorely missed. This publication contains copies of all the papers presented to the Symposium together with a summary of the associated discussions which contains valuable comments upon the contents of the formal papers together with the views of participants on some fundamental issues which remain to be resolved.
Author: Pauli Pedersen
Publisher: Springer Science & Business Media
ISBN: 0306469391
Category : Science
Languages : en
Pages : 424
Get Book Here
Book Description
This book contains the edited version of invited lectures presented at the IUTAM-Sym- sium Synthesis in Bio Solid Mechanics, held at Hotel Frederiksdal, Virum (Copenhagen), Denmark, May 24 to May 27, 1998. The symposium was attended by 48 scientist from 14 countries. Biomechanics has been a very active research area in the last 25 years and covers a very broad class of problems. The present symposium concentrated on the solid mechanics - main of biomechanics, where important problems of synthesis presently are an active and challenging part. Characteristics of biomechanical materials are not only the inhomogeneity and anisotropy, but also the capability to change in relation to actual use. These living materials call for new methods of analysis and also new methods for synthesis. By the synthesis in this context is meant design of implants or artificial control of material growth. Bone mechanics is closely related to recent work on analysis and design of microstructural anisotropic materials. Also, recent work in shape design can to some extent be useful in the more complicated problems of biomechanics. Here interface problems play an essential role. The symposium brought together scientists from mechanics, mathematics and medicine.
Author: H.A. Mang
Publisher: Springer Science & Business Media
ISBN: 940114589X
Category : Technology & Engineering
Languages : en
Pages : 387
Get Book Here
Book Description
The JUT AMlIACM Symposium on Discretization Methods in Structural Mechanics was nd th held in Vienna, Austria, from 2 to 6 June 1997. The site of the Symposium was the "Theatersaal" of the Austrian Academy of Sciences. The Symposium was attended by 71 persons from 23 countries. In addition, several Austrian graduate students and research associates participated in the meeting. In the 5-day Symposium a total of 48 papers were presented. All of them were invited and accorded equal weight in the programme. The following topics were covered: • Error-controlled adaptivity of finite element methods • Large deformations and buckling, including inelastic deformations • Inelastic brittle or ductile localization, phase transition and system failure, resulting from monotonic, cyclic or impact loading • Sensitivity analysis and inverse problems with special emphasis on identification of material parameters • Development of linear and nonlinear finite element methods for thin-walled structures and composites • Implicit integration schemes for nonlinear dynamics • Coupling of rigid and deformable structures; fluid-structures and acoustic-structure interaction • Competitive numerical methods (finite element methods, boundary element methods, coupling ofthese two methods) • Identification of material and structural data. Comments on details of the treatment of these topics are contained in the Concluding Remarks. The Editors would like to express their appreciation to E. Stein who has prepared these Concluding Remarks.
Author: G.E.A. Meier
Publisher: Springer Science & Business Media
ISBN: 9401141991
Category : Technology & Engineering
Languages : en
Pages : 397
Get Book Here
Book Description
The call for papers for the rUTAM-Symposium on Mechanics of Passive and Active Flow Control brought an overwhelming response of applications for contributions. Fi nally 12 invited lectures, 48 papers and 23 posters were selected by thc Scientific Com mittee to be presented in the conference. 58 papers are published in this volume. Due to the limited number of pages available, poster presentations could not be considered for publication. The editors would like to thank all the members of the Scientific Committee for their very valuable assistance. The papers presented at the rUT AM Symposium were classified under three groups de voted to • Passive Control Methods, • Active Control Methods and • Control Concepts. This was done to contrast at first between the passive techniques where the control power is mainly supplied by the flow itself and the active techniques where the power is pro vided by external sources; the third group was devoted to control concepts for presenting methods of control theory and new techniques of flow control.
Author: Ren Wang
Publisher: Springer Science & Business Media
ISBN: 0306469375
Category : Science
Languages : en
Pages : 305
Get Book Here
Book Description
The IUTAM Symposium on Rheology of Bodies with Defects was held in Beijing in September, 1997. It was aimed at the development of Rheology in Solid Mechanics. Rheology is classified in Applied Mechanics Review under fluid mechanics, however, in its broadest content as was envisaged in its earlier days, it covers the whole spectrum of material behavior from elasticity, plasticity, and fluid mechanics to gas dynamics. It was thought of as a branch of continuum mechanics, but emphasized the physical aspects of different materials, and frequently proceeded from basic physical principles. As the temperature rises, the distinction between solid and fluid, and the distinction between their micro-mechanical movements, become blurred. The physical description of such materials and their movements must be based on the thermodynamic principles of state variable theory; the classical division between solid and fluid mechanics disappears. Under the classification adopted by Applied Mechanics Reviews, the subjects dealt with in this symposium come closer to viscoelasticity and viscoplasticity, especially close to the subdivision of creep dealing with creep rupture. The symposium focused at building a bridge between macroscopic and microscopic research on damage and fracture behavior of defective bodies made of metal, polymer, composite and other viscoelastic materials. Two different approaches are presented at the symposium. The first is a continuum damage theory for time-dependent evolution of defects at the macro/meso/microscopic levels.
