Author: Dave R. Moore
Publisher:
ISBN:
Category : Ablation (Aerothermodynamics)
Languages : en
Pages : 90
Book Description
An experimental program has been conducted in the LTV Hypervelocity Wind Tunnel at M = 17 to investigate the effects of ablation product characteristics and thermal lags on re-entry vehicle dynamic stability. The free oscillation method of dynamic stability measurement was used and the ablation processes were simulated by the controlled mass injection through four sections of the porous model skin. The flow rates through the top and bottom quadrants were oscillated at the same frequency and at an amplitude proportional to the model motion. The thermal lag effect was investigated with nitrogen injection into nitrogen tunnel flow at several different mass flow rates and phase angles between the oscillating mass flow and the body motion. The ablation product study was conducted by injecting gases other than nitrogen with specific heat ratio and molecular weight being the test parameters in addition to mass flow rate. The results obtained from these tests indicate significant effect on dynamic stability with both injection phase angle and some characteristics of the injected gas. The effects of model frequency, Reynolds number and mass injection distribution were also investigated and some static pressure measurements were made near the aft of the model. Appendices to the report contain tabulations of the pertinent data and discussions of supporting analytical studies and data analysis.
Investigation of Ablation Effects on Hypersonic Dynamic Stability of a 10 Cone
Author: Dave R. Moore
Publisher:
ISBN:
Category : Ablation (Aerothermodynamics)
Languages : en
Pages : 90
Book Description
An experimental program has been conducted in the LTV Hypervelocity Wind Tunnel at M = 17 to investigate the effects of ablation product characteristics and thermal lags on re-entry vehicle dynamic stability. The free oscillation method of dynamic stability measurement was used and the ablation processes were simulated by the controlled mass injection through four sections of the porous model skin. The flow rates through the top and bottom quadrants were oscillated at the same frequency and at an amplitude proportional to the model motion. The thermal lag effect was investigated with nitrogen injection into nitrogen tunnel flow at several different mass flow rates and phase angles between the oscillating mass flow and the body motion. The ablation product study was conducted by injecting gases other than nitrogen with specific heat ratio and molecular weight being the test parameters in addition to mass flow rate. The results obtained from these tests indicate significant effect on dynamic stability with both injection phase angle and some characteristics of the injected gas. The effects of model frequency, Reynolds number and mass injection distribution were also investigated and some static pressure measurements were made near the aft of the model. Appendices to the report contain tabulations of the pertinent data and discussions of supporting analytical studies and data analysis.
Publisher:
ISBN:
Category : Ablation (Aerothermodynamics)
Languages : en
Pages : 90
Book Description
An experimental program has been conducted in the LTV Hypervelocity Wind Tunnel at M = 17 to investigate the effects of ablation product characteristics and thermal lags on re-entry vehicle dynamic stability. The free oscillation method of dynamic stability measurement was used and the ablation processes were simulated by the controlled mass injection through four sections of the porous model skin. The flow rates through the top and bottom quadrants were oscillated at the same frequency and at an amplitude proportional to the model motion. The thermal lag effect was investigated with nitrogen injection into nitrogen tunnel flow at several different mass flow rates and phase angles between the oscillating mass flow and the body motion. The ablation product study was conducted by injecting gases other than nitrogen with specific heat ratio and molecular weight being the test parameters in addition to mass flow rate. The results obtained from these tests indicate significant effect on dynamic stability with both injection phase angle and some characteristics of the injected gas. The effects of model frequency, Reynolds number and mass injection distribution were also investigated and some static pressure measurements were made near the aft of the model. Appendices to the report contain tabulations of the pertinent data and discussions of supporting analytical studies and data analysis.
Investigation of Ablation Effects on Hypersonic Dynamic Stability of a 10 Deg. Cone
Author: Dave R. Moore
Publisher:
ISBN:
Category :
Languages : en
Pages : 71
Book Description
An experimental program has been conducted in the LTV Hypervelocity Wind Tunnel at M = 17 to investigate the effects of ablation product characteristics and thermal lags on re-entry vehicle dynamic stability. The free oscillation method of dynamic stability measurement was used and the ablation processes were simulated by the controlled mass injection through four sections of the porous model skin. The flow rates through the top and bottom quadrants were oscillated at the same frequency and at an amplitude proportional to the model motion. The thermal lag effect was investigated with nitrogen injection into nitrogen tunnel flow at several different mass flow rates and phase angles between the oscillating mass flow and the body motion. The ablation product study was conducted by injecting gases other than nitrogen with specific heat ratio and molecular weight being the test parameters in addition to mass flow rate. The results obtained from these tests indicate significant effect on dynamic stability with both injection phase angle and some characteristics of the injected gas. The effects of model frequency, Reynolds number and mass injection distribution were also investigated and some static pressure measurements were made near the aft of the model. Appendices to the report contain tabulations of the pertinent data and discussions of supporting analytical studies and data analysis. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 71
Book Description
An experimental program has been conducted in the LTV Hypervelocity Wind Tunnel at M = 17 to investigate the effects of ablation product characteristics and thermal lags on re-entry vehicle dynamic stability. The free oscillation method of dynamic stability measurement was used and the ablation processes were simulated by the controlled mass injection through four sections of the porous model skin. The flow rates through the top and bottom quadrants were oscillated at the same frequency and at an amplitude proportional to the model motion. The thermal lag effect was investigated with nitrogen injection into nitrogen tunnel flow at several different mass flow rates and phase angles between the oscillating mass flow and the body motion. The ablation product study was conducted by injecting gases other than nitrogen with specific heat ratio and molecular weight being the test parameters in addition to mass flow rate. The results obtained from these tests indicate significant effect on dynamic stability with both injection phase angle and some characteristics of the injected gas. The effects of model frequency, Reynolds number and mass injection distribution were also investigated and some static pressure measurements were made near the aft of the model. Appendices to the report contain tabulations of the pertinent data and discussions of supporting analytical studies and data analysis. (Author).
Investigation of Ablation Effects on Hypersonic Dynamic Stability of a 10 Degrees Cone
Author: Dave R. Moore
Publisher:
ISBN:
Category :
Languages : en
Pages : 84
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 84
Book Description
Investigation of Ablation Effects on Hypersonic Dynamic Stability of a 100 Cone
Author: Dave R. Moore
Publisher:
ISBN:
Category : Ablation (Aerothermodynamics)
Languages : en
Pages : 98
Book Description
Publisher:
ISBN:
Category : Ablation (Aerothermodynamics)
Languages : en
Pages : 98
Book Description
Free-flight Investigation of Ablation Effects N the Stability of Conical Reentry Configurations
Author: C. J. Welsh
Publisher:
ISBN:
Category : Ablation (Aerothermodynamics)
Languages : en
Pages : 40
Book Description
A 1000-ft aeroballistics range was used to obtain free-flight stability and drag data for slightly blunted 10-deg semiangle cones with and without ablation occurring on the conical skirts. The configurations investigated included ones having fore- and aft-positioned ablation sleeves, as well as one with a skirt material which did not ablate. The investigation was conducted for a Mach number near 14 and a Reynolds number, based on cone length and free-stream conditions, of about 55000.
Publisher:
ISBN:
Category : Ablation (Aerothermodynamics)
Languages : en
Pages : 40
Book Description
A 1000-ft aeroballistics range was used to obtain free-flight stability and drag data for slightly blunted 10-deg semiangle cones with and without ablation occurring on the conical skirts. The configurations investigated included ones having fore- and aft-positioned ablation sleeves, as well as one with a skirt material which did not ablate. The investigation was conducted for a Mach number near 14 and a Reynolds number, based on cone length and free-stream conditions, of about 55000.
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 602
Book Description
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 602
Book Description
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Technical Abstract Bulletin
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 828
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 828
Book Description
U.S. Government Research & Development Reports
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 212
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 212
Book Description
Government-wide Index to Federal Research & Development Reports
Author:
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1352
Book Description
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 1352
Book Description
Hypersonic Dynamic Stability: Summary [by] L. A. Marshall
Author: General Electric Company
Publisher:
ISBN:
Category : Aerodynamics, Hypersonic
Languages : en
Pages : 108
Book Description
Publisher:
ISBN:
Category : Aerodynamics, Hypersonic
Languages : en
Pages : 108
Book Description