Author: Caijun Shi
Publisher: World Scientific
ISBN: 981279736X
Category : Science
Languages : en
Pages : 448
Book Description
This book describes a number of high-performance construction materials, including concrete, steel, fiber-reinforced cement, fiber-reinforced plastics, polymeric materials, geosynthetics, masonry materials and coatings. It discusses the scientific bases for the manufacture and use of these high-performance materials. Testing and application examples are also included, in particular the application of relatively new high-performance construction materials to design practice.Most books dealing with construction materials typically address traditional materials only rather than high-performance materials and, as a consequence, do not satisfy the increasing demands of today''s society. On the other hand, books dealing with materials science are not engineering-oriented, with limited coverage of the application to engineering practice. This book is thus unique in reflecting the great advances made on high-performance construction materials in recent years.This book is appropriate for use as a textbook for courses in engineering materials, structural materials and civil engineering materials at the senior undergraduate and graduate levels. It is also suitable for use by practice engineers, including construction, materials, mechanical and civil engineers.
High-performance Construction Materials
Summary of Evaluation Findings for the Testing of Seismic Isolation and Energy Dissipating Devices
Author: Highway Innovative Technology Evaluation Center (U.S.)
Publisher: ASCE Publications
ISBN: 9780784474679
Category : Technology & Engineering
Languages : en
Pages : 112
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. his report summarizes the results of an evaluation that was designed to test the performance of 11 seismic isolators and dampers. The devices were tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Publisher: ASCE Publications
ISBN: 9780784474679
Category : Technology & Engineering
Languages : en
Pages : 112
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. his report summarizes the results of an evaluation that was designed to test the performance of 11 seismic isolators and dampers. The devices were tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Construction Industry Research Prospectuses for the 21st Century
Author: Civil Engineering Research Foundation
Publisher: ASCE Publications
ISBN: 9780784474112
Category : Technology & Engineering
Languages : en
Pages : 148
Book Description
Presented at Engineering and Construction for Sustainable Development in the 21st Century, held in Washington, D.C., February 4-8, 1996. Sponsored by the Civil Engineering Research Foundation. This report presents 38 prospectuses developed by industry experts from more than 25 countries as part of an international collaborative agenda for the construction industry to advance innovation in support of sustainable development. The prospectuses, or proposed collaborative projects, identify challenges facing the engineering and construction industry and the problems associated with implementing innovative technologies. The prospectuses also recommend solutions to these challenges; detail the benefits of these solutions; identify proposed collaborative partners; and estimate the cost and schedule associated with implementing these projects.
Publisher: ASCE Publications
ISBN: 9780784474112
Category : Technology & Engineering
Languages : en
Pages : 148
Book Description
Presented at Engineering and Construction for Sustainable Development in the 21st Century, held in Washington, D.C., February 4-8, 1996. Sponsored by the Civil Engineering Research Foundation. This report presents 38 prospectuses developed by industry experts from more than 25 countries as part of an international collaborative agenda for the construction industry to advance innovation in support of sustainable development. The prospectuses, or proposed collaborative projects, identify challenges facing the engineering and construction industry and the problems associated with implementing innovative technologies. The prospectuses also recommend solutions to these challenges; detail the benefits of these solutions; identify proposed collaborative partners; and estimate the cost and schedule associated with implementing these projects.
Evaluation of the Geo-Con VERT Wall System
Author: Highway Innovative Technology Evaluation Center (U.S.)
Publisher: ASCE Publications
ISBN: 9780784475133
Category : Technology & Engineering
Languages : en
Pages : 198
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center This report describes a HITEC evaluation designed to determine the basic capabilites and limitations of the Geo-Con VERT Wall for use as a technically viable permanent excavation support retaining wall system. The evaluation was conducted based on design, construction, performance, and quality assurance information outlined in the HITEC Protocol. The Geo-Con VERT Wall System is an in-situ retaining wall system intended as an alternative to other types of cut walls such as soldier pile and anchored retaining walls. Geo-Con VERT Wall System is comprised of: deep soil mix columns consisting of overlapping or tangent soil-cement columns along the front face backed up by tangent rows of overlapping soil-cement columns; a soil-cement relieving platform overtop the columns; steel beams embedded in the front face soil-cement columns for support of the permanent facing; and permanent facing consisting of precast, reinforced concrete panels or reinforced cast-in-place concrete. The relieving platform is intended to provide internal stability by typing the soil-mix columns together and transferring the load to the bottom of the columns.
Publisher: ASCE Publications
ISBN: 9780784475133
Category : Technology & Engineering
Languages : en
Pages : 198
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF/IIEC Innovation Center This report describes a HITEC evaluation designed to determine the basic capabilites and limitations of the Geo-Con VERT Wall for use as a technically viable permanent excavation support retaining wall system. The evaluation was conducted based on design, construction, performance, and quality assurance information outlined in the HITEC Protocol. The Geo-Con VERT Wall System is an in-situ retaining wall system intended as an alternative to other types of cut walls such as soldier pile and anchored retaining walls. Geo-Con VERT Wall System is comprised of: deep soil mix columns consisting of overlapping or tangent soil-cement columns along the front face backed up by tangent rows of overlapping soil-cement columns; a soil-cement relieving platform overtop the columns; steel beams embedded in the front face soil-cement columns for support of the permanent facing; and permanent facing consisting of precast, reinforced concrete panels or reinforced cast-in-place concrete. The relieving platform is intended to provide internal stability by typing the soil-mix columns together and transferring the load to the bottom of the columns.
Action Plan
Author: Civil Engineering Research Foundation
Publisher: ASCE Publications
ISBN: 9780784474150
Category : Technology & Engineering
Languages : en
Pages : 46
Book Description
Prepared by the Partnership for Building Innovation of CERF. Sponsored by CERF; National Institute of Standards and Technology; U.S. Department of Housing and Urban Development; U.S. Department of Energy; U.S. Army Corps of Engineers. This report presents the results of a planning effort to enhance the entry of building innovation into the marketplace and outlines an action plan for an enhanced national evaluation process. This enhanced evaluation process to identify new building technology should have these characteristics: uses the best expertise targeted to the specific technology being evaluated; evaluates technology to other than code requirements; is recognized by the international community; uses advanced information technology; is utilized by public and private building owners; and can evaluate all types of technologies and systems.
Publisher: ASCE Publications
ISBN: 9780784474150
Category : Technology & Engineering
Languages : en
Pages : 46
Book Description
Prepared by the Partnership for Building Innovation of CERF. Sponsored by CERF; National Institute of Standards and Technology; U.S. Department of Housing and Urban Development; U.S. Department of Energy; U.S. Army Corps of Engineers. This report presents the results of a planning effort to enhance the entry of building innovation into the marketplace and outlines an action plan for an enhanced national evaluation process. This enhanced evaluation process to identify new building technology should have these characteristics: uses the best expertise targeted to the specific technology being evaluated; evaluates technology to other than code requirements; is recognized by the international community; uses advanced information technology; is utilized by public and private building owners; and can evaluate all types of technologies and systems.
Evaluation Findings for Scougal Rubber Corporation High Damping Rubber Bearings
Author: Highway Innovative Technology Evaluation Center (U.S.)
Publisher: ASCE Publications
ISBN: 9780784474563
Category : Technology & Engineering
Languages : en
Pages : 56
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of high-damping rubber bearings,Ømanufactured by Scougal Rubber Corporation. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Publisher: ASCE Publications
ISBN: 9780784474563
Category : Technology & Engineering
Languages : en
Pages : 56
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Service Center. This report summarizes the results of a detailedØevaluation of high-damping rubber bearings,Ømanufactured by Scougal Rubber Corporation. The report is part of a program to test the performance of 11 seismic isolators and dampers produced by several manufacturers. The devicesØwere tested for stability, response during earthquake simulations, and fatigue and weathering effects.
Guidelines for Testing Large Seismic Isolator and Energy Dissipation Devices
Author: Highway Innovative Technology Evaluation Center (U.S.)
Publisher: ASCE Publications
ISBN: 9780784475126
Category : Technology & Engineering
Languages : en
Pages : 40
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report outlines the HITEC Technical Evaluation Plan for large seismic isolator and energy dissipation devices. The plan is designed to characterize the fundamental properties and performance characteritics of a wide range of devices produced by U.S. and overseas manufacturers. It describes a program of full-scale dynamic tests, the results of which should provide guidance to the transportation-engineering community regarding the performance of large seismic devices.
Publisher: ASCE Publications
ISBN: 9780784475126
Category : Technology & Engineering
Languages : en
Pages : 40
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF Innovation Center. This report outlines the HITEC Technical Evaluation Plan for large seismic isolator and energy dissipation devices. The plan is designed to characterize the fundamental properties and performance characteritics of a wide range of devices produced by U.S. and overseas manufacturers. It describes a program of full-scale dynamic tests, the results of which should provide guidance to the transportation-engineering community regarding the performance of large seismic devices.
Evaluation Findings of the MX 30 Pavement Marking Retroreflectometer
Author: Highway Innovative Technology Evaluation Center (U.S.)
Publisher: ASCE Publications
ISBN: 9780784474808
Category : Technology & Engineering
Languages : en
Pages : 82
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF service center. This report presents the results of a detailed evaluation ofØthe MX 30 pavement marking 30-meter retroreflectometer. The evaluation is designed to test the measurement bias, repeatability, and reproducibility of handheld and mobile retroreflectometers produced by several manufacturers.
Publisher: ASCE Publications
ISBN: 9780784474808
Category : Technology & Engineering
Languages : en
Pages : 82
Book Description
Prepared by the Highway Innovative Technology Evaluation Center (HITEC), a CERF service center. This report presents the results of a detailed evaluation ofØthe MX 30 pavement marking 30-meter retroreflectometer. The evaluation is designed to test the measurement bias, repeatability, and reproducibility of handheld and mobile retroreflectometers produced by several manufacturers.
Environmental Technical Verification Report for Ammonia Recovery Process
Author: Environmental Technology Evaluation Center (U.S.)
Publisher: ASCE Publications
ISBN: 9780784474754
Category : Technology & Engineering
Languages : en
Pages : 60
Book Description
Prepared by the Environmental Technology Evaluation Center (EvTEC), a CERF Service Center. This report describes the nature and scope of an environmental evaluation of ThermoEnergy Corporation's Ammonia Recovery Process (ARP) System, a method for recycling ammonia in wastewater. The data in this report were collected over a three-month pilot study.ØTests found that the ARP system is capable of removing 75?99% of the ammonia in the waste stream in a domestic wastewater treatment plant. The ARP System uses a series of absorption, evaporation, and crystallization steps to convert ammonia in wastewater into a commercial fertilizer, ammonium sulfate. The evaluation results clearly indicate that the ARP process is capable of achieving significant ammonia reduction under a range of environmental conditions
Publisher: ASCE Publications
ISBN: 9780784474754
Category : Technology & Engineering
Languages : en
Pages : 60
Book Description
Prepared by the Environmental Technology Evaluation Center (EvTEC), a CERF Service Center. This report describes the nature and scope of an environmental evaluation of ThermoEnergy Corporation's Ammonia Recovery Process (ARP) System, a method for recycling ammonia in wastewater. The data in this report were collected over a three-month pilot study.ØTests found that the ARP system is capable of removing 75?99% of the ammonia in the waste stream in a domestic wastewater treatment plant. The ARP System uses a series of absorption, evaporation, and crystallization steps to convert ammonia in wastewater into a commercial fertilizer, ammonium sulfate. The evaluation results clearly indicate that the ARP process is capable of achieving significant ammonia reduction under a range of environmental conditions
Evaluation of the CON/SPAN Wingwall System
Author: Highway Innovative Technology Evaluation Center (U.S.)
Publisher: ASCE Publications
ISBN: 9780784475058
Category : Technology & Engineering
Languages : en
Pages : 132
Book Description
This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of CON/SPAN Wingwalls for use as a precast retaining wall system. The evaluation was conducted based on design, construction, performances, and quality assurance information outlined in the HITEC Protocol.
Publisher: ASCE Publications
ISBN: 9780784475058
Category : Technology & Engineering
Languages : en
Pages : 132
Book Description
This report describes a HITEC evaluation designed to determine the basic capabilities and limitations of CON/SPAN Wingwalls for use as a precast retaining wall system. The evaluation was conducted based on design, construction, performances, and quality assurance information outlined in the HITEC Protocol.