Global Specification and Validation of Embedded Systems PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Global Specification and Validation of Embedded Systems PDF full book. Access full book title Global Specification and Validation of Embedded Systems by G. Nicolescu. Download full books in PDF and EPUB format.
Author: G. Nicolescu
Publisher: Springer Science & Business Media
ISBN: 1402061536
Category : Technology & Engineering
Languages : en
Pages : 156
Get Book Here
Book Description
This book offers up a deep understanding of concepts and practices behind the composition of heterogeneous components. After the analysis of existing computation and execution models used for the specification and validation of different sub-systems, the book introduces a systematic approach to build an execution model for systems composed of heterogeneous components. Mixed continuous/discrete and hardware/software systems are used to illustrate these concepts. The benefit of reading this book is to arrive at a clear vision of the theory and practice of specification and validation of complex modern systems. Numerous examples give designers highly applicable solutions.
Author: G. Nicolescu
Publisher: Springer Science & Business Media
ISBN: 1402061536
Category : Technology & Engineering
Languages : en
Pages : 156
Get Book Here
Book Description
This book offers up a deep understanding of concepts and practices behind the composition of heterogeneous components. After the analysis of existing computation and execution models used for the specification and validation of different sub-systems, the book introduces a systematic approach to build an execution model for systems composed of heterogeneous components. Mixed continuous/discrete and hardware/software systems are used to illustrate these concepts. The benefit of reading this book is to arrive at a clear vision of the theory and practice of specification and validation of complex modern systems. Numerous examples give designers highly applicable solutions.
Author: Achim Rettberg
Publisher: Springer
ISBN: 0387275592
Category : Computers
Languages : en
Pages : 331
Get Book Here
Book Description
As almost no other technology, embedded systems is an essential element of many innovations in automotive engineering. New functions and improvements of already existing functions, as well as the compliance with traffic regulations and customer requirements, have only become possible by the increasing use of electronic systems, especially in the fields of driving, safety, reliability, and functionality. Along with the functionalities that increase in number and have to cooperate, the complexity of the entire system will increase. Synergy effects resulting from distributed application functionalities via several electronic control devies, exchanging information through the network brings about more complex system architectures with many different sub-networks, operating with different velocities and different protocol implementations. To manage the increasing complexity of these systems, a deterministic behaviour of the control units and the communication network must be provided for, in particular when dealing with a distributed functionality. From Specification to Embedded Systems Application documents recent approaches and results presented at the International Embedded Systems Symposium (IESS 2005), which was held in August 2005 in Manaus (Brazil) and sponsored by the International Federation for Information Processing (IFIP). The topics which have been chosen for this working conference are very timely: design methodology, modeling, specification, software synthesis, power management, formal verification, testing, network, communication systems, distributed control systems, resource management and special aspects in system design.
Author: Abhik Roychoudhury
Publisher: Morgan Kaufmann
ISBN: 0080921256
Category : Computers
Languages : en
Pages : 267
Get Book Here
Book Description
Modern embedded systems require high performance, low cost and low power consumption. Such systems typically consist of a heterogeneous collection of processors, specialized memory subsystems, and partially programmable or fixed-function components. This heterogeneity, coupled with issues such as hardware/software partitioning, mapping, scheduling, etc., leads to a large number of design possibilities, making performance debugging and validation of such systems a difficult problem. Embedded systems are used to control safety critical applications such as flight control, automotive electronics and healthcare monitoring. Clearly, developing reliable software/systems for such applications is of utmost importance. This book describes a host of debugging and verification methods which can help to achieve this goal. Covers the major abstraction levels of embedded systems design, starting from software analysis and micro-architectural modeling, to modeling of resource sharing and communication at the system level Integrates formal techniques of validation for hardware/software with debugging and validation of embedded system design flows Includes practical case studies to answer the questions: does a design meet its requirements, if not, then which parts of the system are responsible for the violation, and once they are identified, then how should the design be suitably modified?
Author: Jean Mermet
Publisher: Springer Science & Business Media
ISBN: 1402028679
Category : Technology & Engineering
Languages : en
Pages : 302
Get Book Here
Book Description
This book presents the perspective of the project on a Paradigm Unifying System Specification Environments for proven Electronic design (PUS SEE) as conceived in the course of the research during 2002 -2003. The initial statement of the research was formulated as follows: The objective of PUSSEE is to introduce the formal proof of system properties throughout a modular system design methodology that integrates sub-systems co-verification with system refinement and reusability of virtual system components. This will be done by combining the UML and B languages to allow the verification of system specifications through the composition of proven sub-systems (in particular interfaces, using the VSIAISLIF standard). The link of B with C, VHDL and SystemC will extend the correct-by-construction design process to lower system-on-chip (SoC) development stages. Prototype tools will be developed for the code generation from UML and B, and existing B verification tools will be extended to support IP reuse, according to the VSI Alliance work. The methodology and tools will be validated through the development of three industrial applications: a wireless mobile terminal-a telecom system-on-chip based on HIPERLANI2 protocol and an anti-collision module for automobiles. The problem was known to be hard and the scope ambitious. But the seventeen chapters that follow, describing the main results obtained demonstrate the success of the research, acknowledged by the European reviewers. They are released to allow the largest audience to learn and take benefit of.
Author: Daniel D. Gajski
Publisher: Springer Science & Business Media
ISBN: 1441905049
Category : Technology & Engineering
Languages : en
Pages : 368
Get Book Here
Book Description
Embedded System Design: Modeling, Synthesis and Verification introduces a model-based approach to system level design. It presents modeling techniques for both computation and communication at different levels of abstraction, such as specification, transaction level and cycle-accurate level. It discusses synthesis methods for system level architectures, embedded software and hardware components. Using these methods, designers can develop applications with high level models, which are automatically translatable to low level implementations. This book, furthermore, describes simulation-based and formal verification methods that are essential for achieving design confidence. The book concludes with an overview of existing tools along with a design case study outlining the practice of embedded system design. Specifically, this book addresses the following topics in detail: . System modeling at different abstraction levels . Model-based system design . Hardware/Software codesign . Software and Hardware component synthesis . System verification This book is for groups within the embedded system community: students in courses on embedded systems, embedded application developers, system designers and managers, CAD tool developers, design automation, and system engineering.
Author: Franz J. Rammig
Publisher: Springer
ISBN: 0387355707
Category : Computers
Languages : en
Pages : 238
Get Book Here
Book Description
Embedded systems are becoming one of the major driving forces in computer science. Furthermore, it is the impact of embedded information technology that dictates the pace in most engineering domains. Nearly all technical products above a certain level of complexity are not only controlled but increasingly even dominated by their embedded computer systems. Traditionally, such embedded control systems have been implemented in a monolithic, centralized way. Recently, distributed solutions are gaining increasing importance. In this approach, the control task is carried out by a number of controllers distributed over the entire system and connected by some interconnect network, like fieldbuses. Such a distributed embedded system may consist of a few controllers up to several hundred, as in today's top-range automobiles. Distribution and parallelism in embedded systems design increase the engineering challenges and require new development methods and tools. This book is the result of the International Workshop on Distributed and Parallel Embedded Systems (DIPES'98), organized by the International Federation for Information Processing (IFIP) Working Groups 10.3 (Concurrent Systems) and 10.5 (Design and Engineering of Electronic Systems). The workshop took place in October 1998 in Schloss Eringerfeld, near Paderborn, Germany, and the resulting book reflects the most recent points of view of experts from Brazil, Finland, France, Germany, Italy, Portugal, and the USA. The book is organized in six chapters: `Formalisms for Embedded System Design': IP-based system design and various approaches to multi-language formalisms. `Synthesis from Synchronous/Asynchronous Specification': Synthesis techniques based on Message Sequence Charts (MSC), StateCharts, and Predicate/Transition Nets. `Partitioning and Load-Balancing': Application in simulation models and target systems. `Verification and Validation': Formal techniques for precise verification and more pragmatic approaches to validation. `Design Environments' for distributed embedded systems and their impact on the industrial state of the art. `Object Oriented Approaches': Impact of OO-techniques on distributed embedded systems. £/LIST£ This volume will be essential reading for computer science researchers and application developers.
Author: Achim Rettberg
Publisher: Springer
ISBN: 0387722580
Category : Computers
Languages : en
Pages : 456
Get Book Here
Book Description
This volume presents the technical program of the 2007 International Embedded Systems Symposium held in Irvine, California. It covers timely topics, techniques and trends in embedded system design, including design methodology, networks-on-chip, distributed and networked systems, and system verification. It places emphasis on automotive and medical applications and includes case studies and special aspects in embedded system design.
Author: Prabhat Mishra
Publisher:
ISBN:
Category : Computer architecture
Languages : en
Pages : 292
Get Book Here
Book Description
Author: Eugenio Villar
Publisher: Springer Science & Business Media
ISBN: 1402082975
Category : Technology & Engineering
Languages : en
Pages : 272
Get Book Here
Book Description
This book is the latest contribution to the Chip Design Languages series and it consists of selected papers presented at the Forum on Specifications and Design Languages (FDL'07), in September 2007. The book represents the state-of-the-art in research and practice, and it identifies new research directions. It highlights the role of specification and modelling languages, and presents practical experiences with specification and modelling languages
Author: Sorin Alexander Huss
Publisher: Springer Science & Business Media
ISBN: 1402061498
Category : Technology & Engineering
Languages : en
Pages : 352
Get Book Here
Book Description
This book is the latest contribution to the Chip Design Languages series and it consists of selected papers presented at the Forum on Specifications and Design Languages (FDL'06), in September 2006. The book represents the state-of-the-art in research and practice, and it identifies new research directions. It highlights the role of specification and modelling languages, and presents practical experiences with specification and modelling languages.
