Flow Dynamics and Condensation of Film Flows in Small Modular Reactors PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Flow Dynamics and Condensation of Film Flows in Small Modular Reactors PDF full book. Access full book title Flow Dynamics and Condensation of Film Flows in Small Modular Reactors by Dongyoung Lee. Download full books in PDF and EPUB format.
Author: Dongyoung Lee
Publisher:
ISBN:
Category : Condensation
Languages : en
Pages : 132
Get Book Here
Book Description
There is renewed interest in the reliability and safety of nuclear power plants following the Fukushima Daiichi nuclear accident followed by 8.9 magnitude earthquake and Tsunami with the height of 15 m on March 11, 2011. Small Modular Reactors (SMRs) have been developed to improve safety systems by utilizing passive and natural circulation forces under normal operations and accident conditions. One key feature of the safety systems in SMRs is the use of containment condensation to prevent core melt down. For further development of the SMR for design certifications, the condensation model at relatively high pressures compared with current operating power plants should be verified and validated. For this process, at Oregon State University, the MASLWR (Multi Application Small Light Water Reactor) test facility, which has 1:3 length scale, can perform integrated tests on containment condensation of SMRs. Using the MASLWR test facility experimental data, this study investigated three major subjects: heat flux estimation on the containment wall, flow transition of condensation film flow dynamics and assessing the scaling effects of the MASLWR test facility. An inverse heat conduction algorithm was developed to estimate the heat fluxes of film condensation at the containment wall in the MASLWR test facility during transients. Through a fundamental one-dimensional approach for condensation film flow, the governing equations were derived and numerically solved. A linear perturbation stability analysis using steady-state results of condensation film flow at the containment wall found that Re ~1600 is the transition point between laminar and turbulent film flow regimes. This finding agreed with the experimental results of Ishigai et al. (1974) and Morioka et al. (1993). Based on scaling analysis using the diffusion layer model and experimental correlations, the length distortion factor was examined. In this study, it was found that the 1:3 length scale test facility underestimated the heat transfer rate more than the prototype. The results presented in this dissertation cover the film flow dynamics of condensation film flows as well as an inverse heat transfer calculation to advance the knowledge of containment condensation in SMRs.
Author: Dongyoung Lee
Publisher:
ISBN:
Category : Condensation
Languages : en
Pages : 132
Get Book Here
Book Description
There is renewed interest in the reliability and safety of nuclear power plants following the Fukushima Daiichi nuclear accident followed by 8.9 magnitude earthquake and Tsunami with the height of 15 m on March 11, 2011. Small Modular Reactors (SMRs) have been developed to improve safety systems by utilizing passive and natural circulation forces under normal operations and accident conditions. One key feature of the safety systems in SMRs is the use of containment condensation to prevent core melt down. For further development of the SMR for design certifications, the condensation model at relatively high pressures compared with current operating power plants should be verified and validated. For this process, at Oregon State University, the MASLWR (Multi Application Small Light Water Reactor) test facility, which has 1:3 length scale, can perform integrated tests on containment condensation of SMRs. Using the MASLWR test facility experimental data, this study investigated three major subjects: heat flux estimation on the containment wall, flow transition of condensation film flow dynamics and assessing the scaling effects of the MASLWR test facility. An inverse heat conduction algorithm was developed to estimate the heat fluxes of film condensation at the containment wall in the MASLWR test facility during transients. Through a fundamental one-dimensional approach for condensation film flow, the governing equations were derived and numerically solved. A linear perturbation stability analysis using steady-state results of condensation film flow at the containment wall found that Re ~1600 is the transition point between laminar and turbulent film flow regimes. This finding agreed with the experimental results of Ishigai et al. (1974) and Morioka et al. (1993). Based on scaling analysis using the diffusion layer model and experimental correlations, the length distortion factor was examined. In this study, it was found that the 1:3 length scale test facility underestimated the heat transfer rate more than the prototype. The results presented in this dissertation cover the film flow dynamics of condensation film flows as well as an inverse heat transfer calculation to advance the knowledge of containment condensation in SMRs.
Author: S. Mostafa Ghiaasiaan
Publisher: Cambridge University Press
ISBN: 9781107153301
Category : Technology & Engineering
Languages : en
Pages : 0
Get Book Here
Book Description
Providing a comprehensive introduction to the fundamentals and applications of flow and heat transfer in conventional and miniature systems, this fully enhanced and updated edition covers all the topics essential for graduate courses on two-phase flow, boiling, and condensation. Beginning with a concise review of single-phase flow fundamentals and interfacial phenomena, detailed and clear discussion is provided on a range of topics, including two-phase hydrodynamics and flow regimes, mathematical modeling of gas-liquid two-phase flows, pool and flow boiling, flow and boiling in mini and microchannels, external and internal-flow condensation with and without noncondensables, condensation in small flow passages, and two-phase choked flow. Numerous solved examples and end-of-chapter problems that include many common design problems likely to be encountered by students, make this an essential text for graduate students. With up-to-date detail on the most recent research trends and practical applications, it is also an ideal reference for professionals and researchers in mechanical, nuclear, and chemical engineering.
Author: Paul M. Chung
Publisher:
ISBN:
Category : Boundary layer
Languages : en
Pages : 40
Get Book Here
Book Description
Author: Jean J. Ginoux
Publisher: Hemisphere Pub
ISBN:
Category : Science
Languages : en
Pages : 488
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 836
Get Book Here
Book Description
Author: Von Karman Institute for Fluid Dynamics
Publisher:
ISBN:
Category : Fluid dynamics
Languages : en
Pages :
Get Book Here
Book Description
Author: A. E. Bergles
Publisher:
ISBN:
Category :
Languages : en
Pages : 587
Get Book Here
Book Description
Author: Esam Saleh
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
A complete two-phase numerical model of film condensation from a mixture of a vapour and a non-condensing gas that is based on the two-dimensional elliptic governing equations with variable physical properties is presented. The model predicts the full viscous flow and heat and mass transfer for the mixture around the tube and in the entire liquid film from the top of the tube to the falling film below the tube. A finite volume method is used with a segregated solution approach and a dynamically moving computational grid that tracks the phase interface sharply. Fundamental balances of mass, energy, and force are enforced accurately at the phase interface. The model was developed in steps and validated against various experimental and theoretical works in the literature for different two-phase flows. The validation tests included stratified flow of liquid and gas in a horizontal channel, falling liquid film over a vertical wall, and condensation of steam from a steam-air mixture in a vertical channel. The model was used to simulate laminar film condensation from a downward flowing steam-air mixture over an isothermal horizontal tube. The validity of this new model is demonstrated by comparisons with previous theoretical and experimental studies. New results are presented on the effects of free-stream-to-tube temperature difference, upstream Reynolds number, free-stream gas mass fraction, and free-stream pressure on the condensate film development, the local and average heat transfer coefficients, and the total condensate mass flow rate. It was found that the temperature difference had the greatest effect on the condensation rate and film thickness. The presence of non-condensing gas in the vapour has a strong negative impact on the condensation process. For the pure steam case, moderate changes in the upstream Reynolds number showed slight increases in condensate mass flow rate with increased Reynolds number. For the mixture case, however, moderate increase in upstream Reynolds number increases significantly the condensate mass flow rate and film thickness. This trend becomes more noticeable as the free-steam gas mass fraction increases. Changing the free-stream pressure demonstrated that property variation had a relatively smaller effect than temperature difference and gas mass fraction changes.
Author:
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 648
Get Book Here
Book Description
NSA is a comprehensive collection of international nuclear science and technology literature for the period 1948 through 1976, pre-dating the prestigious INIS database, which began in 1970. NSA existed as a printed product (Volumes 1-33) initially, created by DOE's predecessor, the U.S. Atomic Energy Commission (AEC). NSA includes citations to scientific and technical reports from the AEC, the U.S. Energy Research and Development Administration and its contractors, plus other agencies and international organizations, universities, and industrial and research organizations. References to books, conference proceedings, papers, patents, dissertations, engineering drawings, and journal articles from worldwide sources are also included. Abstracts and full text are provided if available.
Author: Hugo A. Jakobsen
Publisher: Springer Science & Business Media
ISBN: 3319050923
Category : Technology & Engineering
Languages : en
Pages : 1589
Get Book Here
Book Description
Chemical Reactor Modeling closes the gap between Chemical Reaction Engineering and Fluid Mechanics. The second edition consists of two volumes: Volume 1: Fundamentals. Volume 2: Chemical Engineering Applications In volume 1 most of the fundamental theory is presented. A few numerical model simulation application examples are given to elucidate the link between theory and applications. In volume 2 the chemical reactor equipment to be modeled are described. Several engineering models are introduced and discussed. A survey of the frequently used numerical methods, algorithms and schemes is provided. A few practical engineering applications of the modeling tools are presented and discussed. The working principles of several experimental techniques employed in order to get data for model validation are outlined. The monograph is based on lectures regularly taught in the fourth and fifth years graduate courses in transport phenomena and chemical reactor modeling and in a post graduate course in modern reactor modeling at the Norwegian University of Science and Technology, Department of Chemical Engineering, Trondheim, Norway. The objective of the book is to present the fundamentals of the single-fluid and multi-fluid models for the analysis of single and multiphase reactive flows in chemical reactors with a chemical reactor engineering rather than mathematical bias. Organized into 13 chapters, it combines theoretical aspects and practical applications and covers some of the recent research in several areas of chemical reactor engineering. This book contains a survey of the modern literature in the field of chemical reactor modeling.
