Author: Silvio Simani
Publisher: Springer Science & Business Media
ISBN: 1447138295
Category : Technology & Engineering
Languages : en
Pages : 294
Get Book Here
Book Description
Safety in industrial process and production plants is a concern of rising importance but because the control devices which are now exploited to improve the performance of industrial processes include both sophisticated digital system design techniques and complex hardware, there is a higher probability of failure. Control systems must include automatic supervision of closed-loop operation to detect and isolate malfunctions quickly. A promising method for solving this problem is "analytical redundancy", in which residual signals are obtained and an accurate model of the system mimics real process behaviour. If a fault occurs, the residual signal is used to diagnose and isolate the malfunction. This book focuses on model identification oriented to the analytical approach of fault diagnosis and identification covering: choice of model structure; parameter identification; residual generation; and fault diagnosis and isolation. Sample case studies are used to demonstrate the application of these techniques.
Author: Rolf Isermann
Publisher: Springer
ISBN: 3662494671
Category : Technology & Engineering
Languages : en
Pages : 313
Get Book Here
Book Description
This book offers first a short introduction to advanced supervision, fault detection and diagnosis methods. It then describes model-based methods of fault detection and diagnosis for the main components of gasoline and diesel engines, such as the intake system, fuel supply, fuel injection, combustion process, turbocharger, exhaust system and exhaust gas aftertreatment. Additionally, model-based fault diagnosis of electrical motors, electric, pneumatic and hydraulic actuators and fault-tolerant systems is treated. In general series production sensors are used. It includes abundant experimental results showing the detection and diagnosis quality of implemented faults. Written for automotive engineers in practice, it is also of interest to graduate students of mechanical and electrical engineering and computer science.
Author: Hieu Trinh
Publisher: Springer Science & Business Media
ISBN: 3642240631
Category : Technology & Engineering
Languages : en
Pages : 226
Get Book Here
Book Description
The theory of linear functional observers, which is the subject of this book, is increasingly becoming a popular researched topic because of the many advantages it presents in state observation and control system design. This book presents recent information on the current state of the art research in this field. This book will serve as a useful reference to researchers in this area of research to understand the fundamental concepts relevant to the theory of functional observers and to gather most recent advancements in the field. This book is useful to academics and postgraduate students researching into the theory of linear functional observers. This book can also be useful for specialized final year undergraduate courses in control systems engineering and applied mathematics with a research focus.
Author: Steven X. Ding
Publisher: Springer Science & Business Media
ISBN: 1447147995
Category : Technology & Engineering
Languages : en
Pages : 533
Get Book Here
Book Description
Guaranteeing a high system performance over a wide operating range is an important issue surrounding the design of automatic control systems with successively increasing complexity. As a key technology in the search for a solution, advanced fault detection and identification (FDI) is receiving considerable attention. This book introduces basic model-based FDI schemes, advanced analysis and design algorithms, and mathematical and control-theoretic tools. This second edition of Model-Based Fault Diagnosis Techniques contains: • new material on fault isolation and identification and alarm management; • extended and revised treatment of systematic threshold determination for systems with both deterministic unknown inputs and stochastic noises; • addition of the continuously-stirred tank heater as a representative process-industrial benchmark; and • enhanced discussion of residual evaluation which now deals with stochastic processes. Model-based Fault Diagnosis Techniques will interest academic researchers working in fault identification and diagnosis and as a text it is suitable for graduate students in a formal university-based course or as a self-study aid for practising engineers working with automatic control or mechatronic systems from backgrounds as diverse as chemical process and power engineering.
Author: Ziyun Wang
Publisher: CRC Press
ISBN: 1000737861
Category : Technology & Engineering
Languages : en
Pages : 240
Get Book Here
Book Description
Filter Design for System Modeling, State Estimation and Fault Diagnosis analyzes the latest methods in the design of filters for system modeling, state estimation and fault detection with the intention of providing a new perspective of both theoretical and practical aspects. This book also includes fault diagnosis techniques for unknown but bounded systems, their real applications on modeling and fault diagnosis for lithium battery systems, DC-DC converters and spring damping systems. It proposes new methods based on zonotopic Kalman filtering, a variety of state estimation methods of zonotope and its derived algorithms, a state estimation method based on convex space, set inversion interval observer filtering-based guaranteed fault estimation and a novel interval observer filtering-based fault diagnosis. The methods presented in this text are more practical than the common probabilistic-based algorithms, since these can be applied in unknown but bounded noisy environments. This book will be an essential read for students, scholars and engineering professionals who are interested in filter design, system modeling, state estimation, fault diagnosis and related fields.
Author: Rolf Isermann
Publisher: Springer
ISBN: 9783540871552
Category : Technology & Engineering
Languages : en
Pages : 705
Get Book Here
Book Description
Precise dynamic models of processes are required for many applications, ranging from control engineering to the natural sciences and economics. Frequently, such precise models cannot be derived using theoretical considerations alone. Therefore, they must be determined experimentally. This book treats the determination of dynamic models based on measurements taken at the process, which is known as system identification or process identification. Both offline and online methods are presented, i.e. methods that post-process the measured data as well as methods that provide models during the measurement. The book is theory-oriented and application-oriented and most methods covered have been used successfully in practical applications for many different processes. Illustrative examples in this book with real measured data range from hydraulic and electric actuators up to combustion engines. Real experimental data is also provided on the Springer webpage, allowing readers to gather their first experience with the methods presented in this book. Among others, the book covers the following subjects: determination of the non-parametric frequency response, (fast) Fourier transform, correlation analysis, parameter estimation with a focus on the method of Least Squares and modifications, identification of time-variant processes, identification in closed-loop, identification of continuous time processes, and subspace methods. Some methods for nonlinear system identification are also considered, such as the Extended Kalman filter and neural networks. The different methods are compared by using a real three-mass oscillator process, a model of a drive train. For many identification methods, hints for the practical implementation and application are provided. The book is intended to meet the needs of students and practicing engineers working in research and development, design and manufacturing.
Author: L.H. Chiang
Publisher: Springer Science & Business Media
ISBN: 1447103475
Category : Technology & Engineering
Languages : en
Pages : 281
Get Book Here
Book Description
Early and accurate fault detection and diagnosis for modern chemical plants can minimize downtime, increase the safety of plant operations, and reduce manufacturing costs. This book presents the theoretical background and practical techniques for data-driven process monitoring. It demonstrates the application of all the data-driven process monitoring techniques to the Tennessee Eastman plant simulator, and looks at the strengths and weaknesses of each approach in detail. A plant simulator and problems allow readers to apply process monitoring techniques.
Author: Omar Naifar
Publisher: Springer Nature
ISBN: 3030927318
Category : Technology & Engineering
Languages : en
Pages : 200
Get Book Here
Book Description
This book discusses various methods for designing different kinds of observers, such as the Luenberger observer, unknown input observers, discontinuous observers, sliding mode observers, observers for impulsive systems, observers for nonlinear Takagi-Sugeno fuzzy systems, and observers for electrical machines. A hydraulic process system and a renewable energy system are provided as examples of applications.
Author: Rolf Isermann
Publisher: Springer Science & Business Media
ISBN: 3642127673
Category : Technology & Engineering
Languages : en
Pages : 358
Get Book Here
Book Description
Supervision, condition-monitoring, fault detection, fault diagnosis and fault management play an increasing role for technical processes and vehicles in order to improve reliability, availability, maintenance and lifetime. For safety-related processes fault-tolerant systems with redundancy are required in order to reach comprehensive system integrity. This book is a sequel of the book “Fault-Diagnosis Systems” published in 2006, where the basic methods were described. After a short introduction into fault-detection and fault-diagnosis methods the book shows how these methods can be applied for a selection of 20 real technical components and processes as examples, such as: Electrical drives (DC, AC) Electrical actuators Fluidic actuators (hydraulic, pneumatic) Centrifugal and reciprocating pumps Pipelines (leak detection) Industrial robots Machine tools (main and feed drive, drilling, milling, grinding) Heat exchangers Also realized fault-tolerant systems for electrical drives, actuators and sensors are presented. The book describes why and how the various signal-model-based and process-model-based methods were applied and which experimental results could be achieved. In several cases a combination of different methods was most successful. The book is dedicated to graduate students of electrical, mechanical, chemical engineering and computer science and for engineers.
Author: Rolf Isermann
Publisher: Springer Science & Business Media
ISBN: 3540303685
Category : Technology & Engineering
Languages : en
Pages : 478
Get Book Here
Book Description
With increasing demands for efficiency and product quality plus progress in the integration of automatic control systems in high-cost mechatronic and safety-critical processes, the field of supervision (or monitoring), fault detection and fault diagnosis plays an important role. The book gives an introduction into advanced methods of fault detection and diagnosis (FDD). After definitions of important terms, it considers the reliability, availability, safety and systems integrity of technical processes. Then fault-detection methods for single signals without models such as limit and trend checking and with harmonic and stochastic models, such as Fourier analysis, correlation and wavelets are treated. This is followed by fault detection with process models using the relationships between signals such as parameter estimation, parity equations, observers and principal component analysis. The treated fault-diagnosis methods include classification methods from Bayes classification to neural networks with decision trees and inference methods from approximate reasoning with fuzzy logic to hybrid fuzzy-neuro systems. Several practical examples for fault detection and diagnosis of DC motor drives, a centrifugal pump, automotive suspension and tire demonstrate applications.
