Experimental Study of Fire-induced-delamination of Cross Laminated Timber PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Experimental Study of Fire-induced-delamination of Cross Laminated Timber PDF full book. Access full book title Experimental Study of Fire-induced-delamination of Cross Laminated Timber by . Download full books in PDF and EPUB format.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 6
Get Book Here
Book Description
Cross Laminated Timber (CLT) is increasingly used as a structural material for tall buildings, due to its structural properties and low carbon footprint. CLT is a mass timber product, which is made by crosswise gluing layers of timber lamellae. Recent architectural trends include having visible CLT surfaces, which, in the event of a fire, can become involved in the fire and act as fuel to the fire. A study by the Fire Protection Research Foundation (FPRF; USA), National Fire Protection Agency (NFPA; USA), National Research Council Canada (NRC-CNRC; Canada), Research Institutes of Sweden (RISE; Sweden) and National Institute of Standards and Technology (NIST; USA) has focused on the contribution of exposed CLT to compartment fires. The study included a review of previous compartment fire tests, full-scale fire tests of compartments with and without exposed CLT structures, the development of design methods for engineers and intermediate scale fire tests to identify high-temperature resistant adhesives for CLT. The full-scale compartment tests showed the undesirable consequences of CLT delamination during a fire (i.e. fall-off of exposed lamellas), which occurred due to weakening of the CLT adhesive. These consequences included fire regrowth after a period of decay or a continuation of a fully developed fire. This can make self-extinction of a compartment fire not possible, implicating that the fire will lead to collapse if the fire is not manually extinguished or extinguished by sprinklers. In order to achieve self-extinction of flaming combustion in compartments with exposed CLT it is important to avoid fire-induced delamination. It was shown that fire-induced-delamination can be avoided using high-temperature-resistant adhesives. A test method was developed to identify adhesives that are not prone to fire-induced-delamination under relevant fire conditions. A summary of the test methodology, evaluation and results is discussed in this article.
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 6
Get Book Here
Book Description
Cross Laminated Timber (CLT) is increasingly used as a structural material for tall buildings, due to its structural properties and low carbon footprint. CLT is a mass timber product, which is made by crosswise gluing layers of timber lamellae. Recent architectural trends include having visible CLT surfaces, which, in the event of a fire, can become involved in the fire and act as fuel to the fire. A study by the Fire Protection Research Foundation (FPRF; USA), National Fire Protection Agency (NFPA; USA), National Research Council Canada (NRC-CNRC; Canada), Research Institutes of Sweden (RISE; Sweden) and National Institute of Standards and Technology (NIST; USA) has focused on the contribution of exposed CLT to compartment fires. The study included a review of previous compartment fire tests, full-scale fire tests of compartments with and without exposed CLT structures, the development of design methods for engineers and intermediate scale fire tests to identify high-temperature resistant adhesives for CLT. The full-scale compartment tests showed the undesirable consequences of CLT delamination during a fire (i.e. fall-off of exposed lamellas), which occurred due to weakening of the CLT adhesive. These consequences included fire regrowth after a period of decay or a continuation of a fully developed fire. This can make self-extinction of a compartment fire not possible, implicating that the fire will lead to collapse if the fire is not manually extinguished or extinguished by sprinklers. In order to achieve self-extinction of flaming combustion in compartments with exposed CLT it is important to avoid fire-induced delamination. It was shown that fire-induced-delamination can be avoided using high-temperature-resistant adhesives. A test method was developed to identify adhesives that are not prone to fire-induced-delamination under relevant fire conditions. A summary of the test methodology, evaluation and results is discussed in this article.
Author: Linda Makovicka Osvaldova
Publisher: Springer Nature
ISBN: 3030412350
Category : Technology & Engineering
Languages : en
Pages : 489
Get Book Here
Book Description
This proceedings volume presents new scientific works of the research workers and experts from the field of Wood Science & Fire. It looks into the properties of various tree species across the continents affecting the fire-technical properties of wood and wood-based materials, its modifications, fire-retardant methods and other technological processes that have an impact on wood ignition and burning. The results of these findings have a direct impact on Building Construction and Design describing the fire safety of wooden buildings, mainly large and multi-story ones. The results of these experiments and findings may be applied, or are directly implemented into Fire Science, Hazard Control, Building Safety which makes the application of wood and wood materials in buildings possible, while maintaining strict fire regulations. One part of the contributions focuses on the symbiosis of the material and the fire-fighting technologies. Wood burning has its own specific features, therefore, the fire protection technologies need to be updated regularly. It also includes the issue of the intervention of fire-fighting and rescue teams in the fires of wooden buildings. Presentations deal with the issue of forest fires influenced by the climate changes, relief, fuel models based on the type and the age of the forest stand.
Author: Andrew H. Buchanan
Publisher: John Wiley & Sons
ISBN: 0470972890
Category : Technology & Engineering
Languages : en
Pages : 437
Get Book Here
Book Description
Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.
Author: Dougal Drysdale
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 448
Get Book Here
Book Description
Brings together, for the first time, the basic scientific and engineering principles essential to an understanding of fire behavior. Gathered from a wide range of sources, it covers basic organic and physical chemistry, aspects of heat and mass transfer, premixed and diffusion flames, ignition flame spread, the steady burning of liquid and solid fuels, burning in enclosures, the concepts of fire severity and resistance, and a brief review of smoke production and movement. Includes problems and answers, and detailed references to source materials to facilitate further study.
Author: Kazunori Harada
Publisher: Springer
ISBN: 9811003769
Category : Technology & Engineering
Languages : en
Pages : 891
Get Book Here
Book Description
This book focuses on topics in the entire spectrum of fire safety science, targeting research in fires, explosions, combustion science, heat transfer, fluid dynamics, risk analysis, structural engineering, and other subjects. The book contributes to a gain in advanced scientific knowledge and presents or advances new ideas in all topics in fire safety science. Two decades ago, the 1st Asia-Oceania Symposium on Fire Science and Technology was held in Hefei, China. Since then, the Asia-Oceania Symposia have grown in size and quality. This book, reflecting that growth, helps readers to understand fire safety technology, design, and methodology in diverse areas including historical buildings, photovoltaic panels, batteries, and electric vehicles.
Author: Sven Thelandersson
Publisher: John Wiley & Sons
ISBN: 9780470844694
Category : Technology & Engineering
Languages : en
Pages : 460
Get Book Here
Book Description
Timber construction is one of the most prevalent methods of constructing buildings in North America and an increasingly significant method of construction in Europe and the rest of the world. Timber Engineering deals not only with the structural aspects of timber construction, structural components, joints and systems based on solid timber and engineered wood products, but also material behaviour and properties on a wood element level. Produced by internationally renowned experts in the field, this book represents the state of the art in research on the understanding of the material behaviour of solid wood and engineered wood products. There is no comparable compendium currently available on the topic - the subjects represented include the most recent phenomena of timber engineering and the newest development of practice-related research. Grouped into three different sections, 'Basic properties of wood-based structural elements', 'Design aspects on timber structures' and 'Joints and structural assemblies', this book focuses on key issues in the understanding of: timber as a modern engineered construction material with controlled and documented properties the background for design of structural systems based on timber and engineered wood products the background for structural design of joints in structural timber systems Furthermore, this invaluable book contains advanced teaching material for all technical schools and universities involved in timber engineering. It also provides an essential resource for timber engineering students and researchers, as well as practicing structural and civil engineers.
Author: Erol Karacabeyli
Publisher:
ISBN: 9780864885531
Category : Engineered wood construction
Languages : en
Pages :
Get Book Here
Book Description
Author: Simon Aicher
Publisher: Springer Science & Business Media
ISBN: 9400778112
Category : Technology & Engineering
Languages : en
Pages : 815
Get Book Here
Book Description
This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended options for tailor-made bonding solutions have to be stated. Apart from melamine-urea and phenolic-resorcinol adhesives, one-component-polyurethanes, emulsion isocyanate polymers and epoxies offer a wide range of possibilities. The contributions dealing with experimental and numerical investigations on static, cyclic and seismic behavior of structures clearly reveal the enhanced potential of modern timber construction for reliable and sustainable buildings and bridges of the new millennium. The book is structured in nine thematic areas, being I) Structures II) Mechanical Connections III) Glued Joints and Adhesives IV) Timber and Concrete/Cement/Polymer Composites V) Cyclic, Seismic Behavior VI) Hardwood, Modified Wood and Bamboo VII) Cross-Laminated Timber VIII) Properties and Testing of Wood IX) Glulam
Author: Voichita Bucur
Publisher: Springer Science & Business Media
ISBN: 9048195500
Category : Nature
Languages : en
Pages : 404
Get Book Here
Book Description
In the last quarter century, delamination has come to mean more than just a failure in adhesion between layers of bonded composite plies that might affect their load-bearing capacity. Ever-increasing computer power has meant that we can now detect and analyze delamination between, for example, cell walls in solid wood. This fast-moving and critically important field of study is covered in a book that provides everyone from manufacturers to research scientists the state of the art in wood delamination studies. Divided into three sections, the book first details the general aspects of the subject, from basic information including terminology, to the theoretical basis for the evaluation of delamination. A settled terminology in this subject area is a first key goal of the book, as the terms which describe delamination in wood and wood-based composites are numerous and often confusing. The second section examines different and highly specialized methods for delamination detection such as confocal laser scanning microscopy, light microscopy, scanning electron microscopy and ultrasonics. Ways in which NDE (non-destructive evaluation) can be employed to detect and locate defects are also covered. The book’s final section focuses on the practical aspects of this defect in a wide range of wood products covering the spectrum from trees, logs, laminated panels and glued laminated timbers to parquet floors. Intended as a primary reference, this book covers everything from the microscopic, anatomical level of delamination within solid wood sections to an examination of the interface of wood and its surface coatings. It provides readers with the perspective of industry as well as laboratory and is thus a highly practical sourcebook for wood engineers working in manufacturing as well as a comprehensively referenced text for materials scientists wrestling with the theory underlying the subject.
Author: T. T. Lie
Publisher: Amer Society of Civil Engineers
ISBN: 9780872628885
Category : Technology & Engineering
Languages : en
Pages : 241
Get Book Here
Book Description
Provides a basis for developing new standards to calculate the fire resistance of structural members, mostly in buildings. Considers building codes and techniques of fire protection, the behavior of fire in enclosed spaces and its effect on various building materials, and methods for calculating fir
