Author: Imène Joudi-Bahri
Publisher:
ISBN:
Category :
Languages : fr
Pages : 0
Book Description
L'objectif de la thèse est d'étudier l'effet de la quantité de fillers vis-à-vis des propriétés rhéologiques, mécaniques et dimensionnelles de bétons tout calcaire. Ces bétons ont été confectionnés avec les mêmes gravillons et le même sable provenant de la même production, afin d'éviter tout artéfact. Le sable a servi à fabriquer cinq sables représentatifs des catégories définies dans la norme EN 12260 des granulats à bétons, par mélange avec sa fraction fine ou sa fraction grenue extraites préalablement par lavage. Les sables fabriqués contiennent environ 0, 6, 12, 18 et 24% de fillers. Les bétons ont été formulés avec le logiciel BetonlabPro2, dont les algorithmes prennent en compte la présence des fillers calcaires. Les bétons ont été réalisés tout d'abord sans superplastifiant, puis en présence d'un superplastifiant dosé à 2/3 de la saturation. Les résultats obtenus ont montré qu'une quantité de fillers de 100 à 130 kg/m3 pour les bétons courants et de 60 à 80 kg/m3 pour les bétons superplastifiés, permet d'obtenir des propriétés optimales, à consistance égale. Mais des quantités supérieures de fillers n'altèrent pas significativement les propriétés des bétons, même si leur compacité diminue. On explique ce comportement non seulement par l'effet liant attribué aux fillers calcaires, mais aussi par une amélioration de la liaison pâte granulats. Les mélanges contenant les plus forts taux de fillers ont encore été étudiés pour formuler des bétons autoplaçants BAP, qui nécessitent une grande quantité de fillers. Les sables de concassage apportent alors la majeure partie de ce constituant, ce qui leur ouvre une voie nouvelle d'utilisation.
Influence des sables fillérisés calcaires sur les propriétés des bétons courants et superplastifiés. Un exemple tunisien
Author: Imène Joudi-Bahri
Publisher:
ISBN:
Category :
Languages : fr
Pages : 0
Book Description
L'objectif de la thèse est d'étudier l'effet de la quantité de fillers vis-à-vis des propriétés rhéologiques, mécaniques et dimensionnelles de bétons tout calcaire. Ces bétons ont été confectionnés avec les mêmes gravillons et le même sable provenant de la même production, afin d'éviter tout artéfact. Le sable a servi à fabriquer cinq sables représentatifs des catégories définies dans la norme EN 12260 des granulats à bétons, par mélange avec sa fraction fine ou sa fraction grenue extraites préalablement par lavage. Les sables fabriqués contiennent environ 0, 6, 12, 18 et 24% de fillers. Les bétons ont été formulés avec le logiciel BetonlabPro2, dont les algorithmes prennent en compte la présence des fillers calcaires. Les bétons ont été réalisés tout d'abord sans superplastifiant, puis en présence d'un superplastifiant dosé à 2/3 de la saturation. Les résultats obtenus ont montré qu'une quantité de fillers de 100 à 130 kg/m3 pour les bétons courants et de 60 à 80 kg/m3 pour les bétons superplastifiés, permet d'obtenir des propriétés optimales, à consistance égale. Mais des quantités supérieures de fillers n'altèrent pas significativement les propriétés des bétons, même si leur compacité diminue. On explique ce comportement non seulement par l'effet liant attribué aux fillers calcaires, mais aussi par une amélioration de la liaison pâte granulats. Les mélanges contenant les plus forts taux de fillers ont encore été étudiés pour formuler des bétons autoplaçants BAP, qui nécessitent une grande quantité de fillers. Les sables de concassage apportent alors la majeure partie de ce constituant, ce qui leur ouvre une voie nouvelle d'utilisation.
Publisher:
ISBN:
Category :
Languages : fr
Pages : 0
Book Description
L'objectif de la thèse est d'étudier l'effet de la quantité de fillers vis-à-vis des propriétés rhéologiques, mécaniques et dimensionnelles de bétons tout calcaire. Ces bétons ont été confectionnés avec les mêmes gravillons et le même sable provenant de la même production, afin d'éviter tout artéfact. Le sable a servi à fabriquer cinq sables représentatifs des catégories définies dans la norme EN 12260 des granulats à bétons, par mélange avec sa fraction fine ou sa fraction grenue extraites préalablement par lavage. Les sables fabriqués contiennent environ 0, 6, 12, 18 et 24% de fillers. Les bétons ont été formulés avec le logiciel BetonlabPro2, dont les algorithmes prennent en compte la présence des fillers calcaires. Les bétons ont été réalisés tout d'abord sans superplastifiant, puis en présence d'un superplastifiant dosé à 2/3 de la saturation. Les résultats obtenus ont montré qu'une quantité de fillers de 100 à 130 kg/m3 pour les bétons courants et de 60 à 80 kg/m3 pour les bétons superplastifiés, permet d'obtenir des propriétés optimales, à consistance égale. Mais des quantités supérieures de fillers n'altèrent pas significativement les propriétés des bétons, même si leur compacité diminue. On explique ce comportement non seulement par l'effet liant attribué aux fillers calcaires, mais aussi par une amélioration de la liaison pâte granulats. Les mélanges contenant les plus forts taux de fillers ont encore été étudiés pour formuler des bétons autoplaçants BAP, qui nécessitent une grande quantité de fillers. Les sables de concassage apportent alors la majeure partie de ce constituant, ce qui leur ouvre une voie nouvelle d'utilisation.
Adhesion Between Polymers and Concrete / Adhésion Entre Polymères Et Béton
Author: H. R. Sasse
Publisher: Springer
ISBN:
Category : Science
Languages : en
Pages : 792
Book Description
Preface Adhesion is a phenomenon architects and civil engineers are not very familiar with. In other disciplines knowledge about surface properties and the background of bonding energies is also far from satisfactory; nevertheless there are many important· applications in concrete engineering, where adhesion is necessary for success and durability. These include: - coating and painting - repair of concrete surfaces - bonding of fresh to old concrete - crack injection - glueing of precast elements - glueing of steel to concrete, etc. In 1981 RILEM established the technical committee 52-RAC 'Resin Adherence to Concrete'. The main aims of the committee's work were - to collect research results and practical experiences - to initiate and coordinate research programs - to develop, on a scientific base, test methods for field and for laboratory purposes. One of the results of the committee's work is a state-of-the-art report, which will be presented orally as a General Report at the International Symposium ISAP '86, and will be printed either in the RILEM journal Materials and Structures or separately. Several test recommendations have been elaborated and will be prepared as drafts for the participants ofISAP '86. These are: - direct tensile test - pull-off test - direct shear test - slant shear test - four-point bending test - dynamic loading test - thermal compatibility test (two versions) - injectibility test.
Publisher: Springer
ISBN:
Category : Science
Languages : en
Pages : 792
Book Description
Preface Adhesion is a phenomenon architects and civil engineers are not very familiar with. In other disciplines knowledge about surface properties and the background of bonding energies is also far from satisfactory; nevertheless there are many important· applications in concrete engineering, where adhesion is necessary for success and durability. These include: - coating and painting - repair of concrete surfaces - bonding of fresh to old concrete - crack injection - glueing of precast elements - glueing of steel to concrete, etc. In 1981 RILEM established the technical committee 52-RAC 'Resin Adherence to Concrete'. The main aims of the committee's work were - to collect research results and practical experiences - to initiate and coordinate research programs - to develop, on a scientific base, test methods for field and for laboratory purposes. One of the results of the committee's work is a state-of-the-art report, which will be presented orally as a General Report at the International Symposium ISAP '86, and will be printed either in the RILEM journal Materials and Structures or separately. Several test recommendations have been elaborated and will be prepared as drafts for the participants ofISAP '86. These are: - direct tensile test - pull-off test - direct shear test - slant shear test - four-point bending test - dynamic loading test - thermal compatibility test (two versions) - injectibility test.
Admixtures for Concrete - Improvement of Properties
Author: E. Vazques
Publisher: CRC Press
ISBN: 0203008758
Category : Architecture
Languages : en
Pages : 653
Book Description
Chemical admixtures are used to modify the properties and behaviour of fresh and hardened concrete. They enable more economic construction and the achievement of special properties such as high strength or durability. This book presents new research information from an International RILEM Symposium on six main topics: workability, setting, strength, durability, other properties and technology.
Publisher: CRC Press
ISBN: 0203008758
Category : Architecture
Languages : en
Pages : 653
Book Description
Chemical admixtures are used to modify the properties and behaviour of fresh and hardened concrete. They enable more economic construction and the achievement of special properties such as high strength or durability. This book presents new research information from an International RILEM Symposium on six main topics: workability, setting, strength, durability, other properties and technology.
Terra 2008
Author: Leslie Rainer
Publisher: Getty Publications
ISBN: 1606060430
Category : Architecture
Languages : fr
Pages : 438
Book Description
Earthen architecture constitutes one of the most diverse forms of cultural heritage and one of the most challenging to preserve. It dates from all periods and is found on all continents but is particularly prevalent in Africa, where it has been a building tradition for centuries. Sites range from ancestral cities in Mali to the palaces of Abomey in Benin, from monuments and mosques in Iran and Buddhist temples on the Silk Road to Spanish missions in California. This volume's sixty-four papers address such themes as earthen architecture in Mali, the conservation of living sites, local knowledge systems and intangible aspects, seismic and other natural forces, the conservation and management of archaeological sites, research advances, and training.
Publisher: Getty Publications
ISBN: 1606060430
Category : Architecture
Languages : fr
Pages : 438
Book Description
Earthen architecture constitutes one of the most diverse forms of cultural heritage and one of the most challenging to preserve. It dates from all periods and is found on all continents but is particularly prevalent in Africa, where it has been a building tradition for centuries. Sites range from ancestral cities in Mali to the palaces of Abomey in Benin, from monuments and mosques in Iran and Buddhist temples on the Silk Road to Spanish missions in California. This volume's sixty-four papers address such themes as earthen architecture in Mali, the conservation of living sites, local knowledge systems and intangible aspects, seismic and other natural forces, the conservation and management of archaeological sites, research advances, and training.
Supplementary Cementing Materials
Author: Rafat Siddique
Publisher: Springer Science & Business Media
ISBN: 3642178669
Category : Technology & Engineering
Languages : en
Pages : 297
Book Description
This book is an attempt to consolidate the published research related to the use of Supplementary Cementing Materials in cement and concrete. It comprises of five chapters. Each chapter is devoted to a particular supplementing cementing material. It is based on the literature/research findings published in journals/conference proceeding, etc. Topics covered in the book are; coal fly ash, silica fume (SF), granulated blast furnace slag (GGBS), metakaolin (MK), and rice husk ash (RHA). Each chapter contains introduction, properties of the waste material/by-product, its potential usage, and its effect on the properties of fresh and hardened concrete and other cement based materials.
Publisher: Springer Science & Business Media
ISBN: 3642178669
Category : Technology & Engineering
Languages : en
Pages : 297
Book Description
This book is an attempt to consolidate the published research related to the use of Supplementary Cementing Materials in cement and concrete. It comprises of five chapters. Each chapter is devoted to a particular supplementing cementing material. It is based on the literature/research findings published in journals/conference proceeding, etc. Topics covered in the book are; coal fly ash, silica fume (SF), granulated blast furnace slag (GGBS), metakaolin (MK), and rice husk ash (RHA). Each chapter contains introduction, properties of the waste material/by-product, its potential usage, and its effect on the properties of fresh and hardened concrete and other cement based materials.
Transportation Forum
Author:
Publisher:
ISBN:
Category : Transportation
Languages : en
Pages : 312
Book Description
Publisher:
ISBN:
Category : Transportation
Languages : en
Pages : 312
Book Description
Rheology of Fresh Cement and Concrete
Author: P.F.G. Banfill
Publisher: CRC Press
ISBN: 9780419153603
Category : Architecture
Languages : en
Pages : 388
Book Description
This book brings together new research information on the flow behaviour of cementitious materials from the UK, France, Italy, Germany, Poland, Finland, USSR, USA and Japan, presented at the International Conference organised by the British Society of Rheology in March 1990.
Publisher: CRC Press
ISBN: 9780419153603
Category : Architecture
Languages : en
Pages : 388
Book Description
This book brings together new research information on the flow behaviour of cementitious materials from the UK, France, Italy, Germany, Poland, Finland, USSR, USA and Japan, presented at the International Conference organised by the British Society of Rheology in March 1990.
Canadian Journal of Civil Engineering
Author:
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 580
Book Description
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 580
Book Description
Actas Y Memorias ... Congreso de Grandes Presas
Author:
Publisher:
ISBN:
Category : Dams
Languages : fr
Pages : 1552
Book Description
Publisher:
ISBN:
Category : Dams
Languages : fr
Pages : 1552
Book Description
Aggregates in Concrete
Author: Mark Alexander
Publisher: CRC Press
ISBN: 9780415258395
Category : Technology & Engineering
Languages : en
Pages : 460
Book Description
Bringing together in one volume the latest research and information, this book provides a detailed guide to the selection and use of aggregates in concrete. After an introduction defining the purpose and role of aggregates in concrete, the authors present an overview of aggregate sources and production techniques, followed by a detailed study of their physical, mechanical and chemical properties. This knowledge is then applied to the use of aggregates in both plastic and hardened concretes, and in the overall mix design. Special aggregates and their applications are discussed in detail, as are the current main specifications, standards and tests.
Publisher: CRC Press
ISBN: 9780415258395
Category : Technology & Engineering
Languages : en
Pages : 460
Book Description
Bringing together in one volume the latest research and information, this book provides a detailed guide to the selection and use of aggregates in concrete. After an introduction defining the purpose and role of aggregates in concrete, the authors present an overview of aggregate sources and production techniques, followed by a detailed study of their physical, mechanical and chemical properties. This knowledge is then applied to the use of aggregates in both plastic and hardened concretes, and in the overall mix design. Special aggregates and their applications are discussed in detail, as are the current main specifications, standards and tests.