Epitaxial Growth, Characterization and Application of Novel Wide Bandgap Oxide Semiconductors

Epitaxial Growth, Characterization and Application of Novel Wide Bandgap Oxide Semiconductors PDF Author: Jeremy West Mares
Publisher:
ISBN:
Category : Molecular beam epitaxy
Languages : en
Pages : 136

Get Book Here

Book Description
In this work, a body of knowledge is presented which pertains to the growth, characterization and exploitation of high quality, novel II-IV oxide epitaxial films and structures grown by plasma-assisted molecular beam epitaxy. The two compounds of primary interest within this research are the ternary films Ni[subscript x]Mg1[subscript x]O and Zn[subscript x]Mg1[subscript x]0 and the investigation focuses predominantly on the realization, assessment and implementation of these two oxides as optoelectronic materials. The functioning hypothesis for this largely experimental effort has been that these cubic ternary oxides can be exploited--and possibly even juxtaposed--to realize novel wide band gap optoelectronic technologies. The results of the research conducted presented herein overwhelmingly support this hypothesis in that they confirm the possibility to grow these films with sufficient quality by this technique, as conjectured. Ni[subscript x]Mg1−[subscript x]O films with varying Nickel concentrations ranging from x = 0 to x = 1 have been grown on lattice matched MgO substrates (lattice mismatch [epsilon][less than]0.01) and characterized structurally, morphologically, optically and electrically. Similarly, cubic Zn[subscript x]Mg1−[subscript x]0 films with Zinc concentrations ranging from x = 0 to x[almost equal to]0.53, as limited by phase segregation, have also been grown and characterized. Photoconductive devices have been designed and fabricated from these films and characterized. Successfully engineered films in both categories exhibit the desired deep ultraviolet photoresponse and therefore verify the hypothesis. While the culminating work of interest here focuses on the two compounds discussed above, the investigation has also involved the characterization or exploitation of related films including hexagonal phase Zn[subscript x]Mg1−[subscript x]O, ZnO, Cd[subscript x]Zn1−[subscript x]O and hybrid structures based on these compounds used in conjunction with GaN. These works were critical precursors to the growth of cubic oxides, however, and are closely relevant. Viewed in its entirety, this document can therefore be considered a multifaceted interrogation of several novel oxide compounds and structures, both cubic and wurtzite in structure. The conclusions of the research can be stated succinctly as a quantifiably successful effort to validate the use of these compounds and structures for wide bandgap optoelectronic technologies.

Epitaxial Growth, Characterization and Application of Novel Wide Bandgap Oxide Semiconductors

Epitaxial Growth, Characterization and Application of Novel Wide Bandgap Oxide Semiconductors PDF Author: Jeremy West Mares
Publisher:
ISBN:
Category : Molecular beam epitaxy
Languages : en
Pages : 136

Get Book Here

Book Description
In this work, a body of knowledge is presented which pertains to the growth, characterization and exploitation of high quality, novel II-IV oxide epitaxial films and structures grown by plasma-assisted molecular beam epitaxy. The two compounds of primary interest within this research are the ternary films Ni[subscript x]Mg1[subscript x]O and Zn[subscript x]Mg1[subscript x]0 and the investigation focuses predominantly on the realization, assessment and implementation of these two oxides as optoelectronic materials. The functioning hypothesis for this largely experimental effort has been that these cubic ternary oxides can be exploited--and possibly even juxtaposed--to realize novel wide band gap optoelectronic technologies. The results of the research conducted presented herein overwhelmingly support this hypothesis in that they confirm the possibility to grow these films with sufficient quality by this technique, as conjectured. Ni[subscript x]Mg1−[subscript x]O films with varying Nickel concentrations ranging from x = 0 to x = 1 have been grown on lattice matched MgO substrates (lattice mismatch [epsilon][less than]0.01) and characterized structurally, morphologically, optically and electrically. Similarly, cubic Zn[subscript x]Mg1−[subscript x]0 films with Zinc concentrations ranging from x = 0 to x[almost equal to]0.53, as limited by phase segregation, have also been grown and characterized. Photoconductive devices have been designed and fabricated from these films and characterized. Successfully engineered films in both categories exhibit the desired deep ultraviolet photoresponse and therefore verify the hypothesis. While the culminating work of interest here focuses on the two compounds discussed above, the investigation has also involved the characterization or exploitation of related films including hexagonal phase Zn[subscript x]Mg1−[subscript x]O, ZnO, Cd[subscript x]Zn1−[subscript x]O and hybrid structures based on these compounds used in conjunction with GaN. These works were critical precursors to the growth of cubic oxides, however, and are closely relevant. Viewed in its entirety, this document can therefore be considered a multifaceted interrogation of several novel oxide compounds and structures, both cubic and wurtzite in structure. The conclusions of the research can be stated succinctly as a quantifiably successful effort to validate the use of these compounds and structures for wide bandgap optoelectronic technologies.

New Applications for Wide-Bandgap Semiconductors: Volume 764

New Applications for Wide-Bandgap Semiconductors: Volume 764 PDF Author: Materials Research Society. Meeting
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 456

Get Book Here

Book Description
Wide-bandgap semiconductors such as SiC, GaN and related alloys, BN and related alloys, ZnGeSiN2, ZnO, and others continue to find new applications in solid-state lighting, sensors, filters, high-power electronics, biological detection, and spintronics. Improved bulk and epitaxial growth, processing, device design, and understanding of the physics of transport in heterostructures are all necessary for realization of these new technologies. The papers in this book span a range of subjects from material growth and characterization to the processing and application of devices in the electronic, as well as the optoelectronic, fields. Topics include: special invited papers; growth, processing and devices; novel applications for wide-bandgap semiconductors; oxides, heterostructures and devices; processing and devices and emerging areas.

Novel Devices Employing Epitaxial Wide Bandgap Semiconductors

Novel Devices Employing Epitaxial Wide Bandgap Semiconductors PDF Author: Zvonimir Z. Bandic
Publisher:
ISBN:
Category :
Languages : en
Pages : 274

Get Book Here

Book Description


Growth and Characterization of Wide Bandgap Semiconductor Oxide Thin Films

Growth and Characterization of Wide Bandgap Semiconductor Oxide Thin Films PDF Author: Susmita Ghose
Publisher:
ISBN:
Category : Molecular beam epitaxy
Languages : en
Pages : 240

Get Book Here

Book Description
Wide bandgap semiconductors are receiving extensive attention due to their exceptional physical and chemical properties making them useful for high efficiency and high power electronic devices. Comparing other conventional wide bandgap materials, monoclinic Îø-Ga2O3 also represents an outstanding semiconductor oxide for next generation of UV optoelectronics and high temperature sensors due to its wide band gap (~4.9eV). This new semiconductor material has higher breakdown voltage (8MV/cm) and n-type conductivity which make it more suitable for potential application as high power electronics. The properties and potential applications of these wide bandgap materials have not yet fully explored. In this study, the growth and characterization of single crystal b-Ga2O3 thin films grown on c-plane sapphire (Al2O3) substrate using two different techniques; molecular beam epitaxy (MBE) and pulsed laser deposition (PLD) techniques has been investigated. The influence of the growth parameters of MBE and PLD on crystalline quality and surface has been explored. Two methods have been used to grow Ga2O3 using MBE; one method is to use elemental Ga and the second is the use of a polycrystalline Ga2O3 compound source with and without an oxygen source. Using the elemental Ga source, growth rate of b-Ga2O3 thin films was limited due to the formation and desorption of Ga2O molecules. In order to mitigate this problem, a compound Ga2O3 source has been introduced and used for the growth of crystalline b-Ga2O3 thin films without the need for additional oxygen since this source produces Ga-O molecules and additional oxygen. Two different alloys (InGa)2O3 and (AlGa)2O3 has been grown on c-plane sapphire substrate by pulsed laser deposition technique to tune the bandgap of the oxide thin films from 3.5-8.6 eV suitable for applications such as wavelength-tunable optical devices, solid-state lighting and high electron mobility transistors (HEMTs). The crystallinity, chemical bonding, surface morphology and optical properties have been systematically evaluated by a number of in-situ and ex-situ techniques. The crystalline Ga2O3 films showed pure phase of (2 Ì501) plane orientation and in-plane XRD phi-scan exhibited the six-fold rotational symmetry for b-Ga2O3 when grown on sapphire substrate. The alloys exhibit different phases has been stabilized depending on the compositions. Finally, a metal-semiconductor-metal (MSM) structure deep-ultraviolet (DUV) photodetector has been fabricated on Îø-Ga2O3 film grown with an optimized growth condition has been demonstrated. This photodetector exhibited high resistance as well as small dark current with expected photoresponse for 254 nm UV light irradiation suggesting Îø-Ga2O3 thin films as a potential candidate for deep-UV photodetectors. While the grown Ga2O3 shows high resistivity, the electrical properties of (In0.6Ga0.4)2O3 and (In0.8Ga0.2)2O3 alloys show low resistivity with a high carrier concentration and increasing mobility with In content.

Wide Bandgap Semiconductors for Power Electronics

Wide Bandgap Semiconductors for Power Electronics PDF Author: Peter Wellmann
Publisher: John Wiley & Sons
ISBN: 3527346716
Category : Technology & Engineering
Languages : en
Pages : 743

Get Book Here

Book Description
Wide Bandgap Semiconductors for Power Electronic A guide to the field of wide bandgap semiconductor technology Wide Bandgap Semiconductors for Power Electronics is a comprehensive and authoritative guide to wide bandgap materials silicon carbide, gallium nitride, diamond and gallium(III) oxide. With contributions from an international panel of experts, the book offers detailed coverage of the growth of these materials, their characterization, and how they are used in a variety of power electronics devices such as transistors and diodes and in the areas of quantum information and hybrid electric vehicles. The book is filled with the most recent developments in the burgeoning field of wide bandgap semiconductor technology and includes information from cutting-edge semiconductor companies as well as material from leading universities and research institutions. By taking both scholarly and industrial perspectives, the book is designed to be a useful resource for scientists, academics, and corporate researchers and developers. This important book: Presents a review of wide bandgap materials and recent developments Links the high potential of wide bandgap semiconductors with the technological implementation capabilities Offers a unique combination of academic and industrial perspectives Meets the demand for a resource that addresses wide bandgap materials in a comprehensive manner Written for materials scientists, semiconductor physicists, electrical engineers, Wide Bandgap Semiconductors for Power Electronics provides a state of the art guide to the technology and application of SiC and related wide bandgap materials.

Epitaxial Growth and Characterization of Thin Films and Superlattices of Wide Band Gap II-VI Semiconductors Grown by Pulsed Laser Deposition

Epitaxial Growth and Characterization of Thin Films and Superlattices of Wide Band Gap II-VI Semiconductors Grown by Pulsed Laser Deposition PDF Author: Shengxi Duan
Publisher:
ISBN:
Category : Epitaxy
Languages : en
Pages : 142

Get Book Here

Book Description


Epitaxial Growth of Complex Metal Oxides

Epitaxial Growth of Complex Metal Oxides PDF Author: Gertjan Koster
Publisher: Woodhead Publishing
ISBN: 0081029462
Category : Science
Languages : en
Pages : 534

Get Book Here

Book Description
Epitaxial Growth of Complex Metal Oxides, Second Edition reviews techniques and recent developments in the fabrication quality of complex metal oxides, which are facilitating advances in electronic, magnetic and optical applications. Sections review the key techniques involved in the epitaxial growth of complex metal oxides and explore the effects of strain and stoichiometry on crystal structure and related properties in thin film oxides. Finally, the book concludes by discussing selected examples of important applications of complex metal oxide thin films, including optoelectronics, batteries, spintronics and neuromorphic applications. This new edition has been fully updated, with brand new chapters on topics such as atomic layer deposition, interfaces, STEM-EELs, and the epitaxial growth of multiferroics, ferroelectrics and nanocomposites. Examines the techniques used in epitaxial thin film growth for complex oxides, including atomic layer deposition, sputtering techniques, molecular beam epitaxy, and chemical solution deposition techniques Reviews materials design strategies and materials property analysis methods, including the impacts of defects, strain, interfaces and stoichiometry Describes key applications of epitaxially grown metal oxides, including optoelectronics, batteries, spintronics and neuromorphic applications

Molecular Beam Epitaxy

Molecular Beam Epitaxy PDF Author: Mohamed Henini
Publisher: Elsevier
ISBN: 0128121378
Category : Science
Languages : en
Pages : 790

Get Book Here

Book Description
Molecular Beam Epitaxy (MBE): From Research to Mass Production, Second Edition, provides a comprehensive overview of the latest MBE research and applications in epitaxial growth, along with a detailed discussion and ‘how to’ on processing molecular or atomic beams that occur on the surface of a heated crystalline substrate in a vacuum. The techniques addressed in the book can be deployed wherever precise thin-film devices with enhanced and unique properties for computing, optics or photonics are required. It includes new semiconductor materials, new device structures that are commercially available, and many that are at the advanced research stage. This second edition covers the advances made by MBE, both in research and in the mass production of electronic and optoelectronic devices. Enhancements include new chapters on MBE growth of 2D materials, Si-Ge materials, AIN and GaN materials, and hybrid ferromagnet and semiconductor structures. Condenses the fundamental science of MBE into a modern reference, speeding up literature review Discusses new materials, novel applications and new device structures, grounding current commercial applications with modern understanding in industry and research Includes coverage of MBE as mass production epitaxial technology and how it enhances processing efficiency and throughput for the semiconductor industry and nanostructured semiconductor materials research community

Integration of Functional Oxides with Semiconductors

Integration of Functional Oxides with Semiconductors PDF Author: Alexander A. Demkov
Publisher: Springer Science & Business Media
ISBN: 146149320X
Category : Technology & Engineering
Languages : en
Pages : 284

Get Book Here

Book Description
This book describes the basic physical principles of the oxide/semiconductor epitaxy and offers a view of the current state of the field. It shows how this technology enables large-scale integration of oxide electronic and photonic devices and describes possible hybrid semiconductor/oxide systems. The book incorporates both theoretical and experimental advances to explore the heteroepitaxy of tuned functional oxides and semiconductors to identify material, device and characterization challenges and to present the incredible potential in the realization of multifunctional devices and monolithic integration of materials and devices. Intended for a multidisciplined audience, Integration of Functional Oxides with Semiconductors describes processing techniques that enable atomic-level control of stoichiometry and structure and reviews characterization techniques for films, interfaces and device performance parameters. Fundamental challenges involved in joining covalent and ionic systems, chemical interactions at interfaces, multi-element materials that are sensitive to atomic-level compositional and structural changes are discussed in the context of the latest literature. Magnetic, ferroelectric and piezoelectric materials and the coupling between them will also be discussed. GaN, SiC, Si, GaAs and Ge semiconductors are covered within the context of optimizing next-generation device performance for monolithic device processing.

Fundamentals of Silicon Carbide Technology

Fundamentals of Silicon Carbide Technology PDF Author: Tsunenobu Kimoto
Publisher: John Wiley & Sons
ISBN: 1118313550
Category : Technology & Engineering
Languages : en
Pages : 565

Get Book Here

Book Description
A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.