Environmental and Economic Comparison of Cooling System Designs for Steam-electric Power Plants PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Environmental and Economic Comparison of Cooling System Designs for Steam-electric Power Plants PDF full book. Access full book title Environmental and Economic Comparison of Cooling System Designs for Steam-electric Power Plants by Kenneth Fred Najjar. Download full books in PDF and EPUB format.
Author: Kenneth Fred Najjar
Publisher:
ISBN:
Category : Steam power plants
Languages : en
Pages : 187
Get Book Here
Book Description
The selection of waste heat rejection systems for steam-electric power plants involves a trade-off among environmental, energy and water conservation, and economic factors. This study compares four general types of cooling systems on the basis of these factors. The cooling systems chosen for study are: once-through systems including surface canals and submerged multiport diffusers; shallow closed cycle cooling ponds; mechanical and natural draft evaporative cooling towers; and mechanical draft dry towers. The cooling system comparison involves, first, an optimization of each cooling system and then a comparison among optimal systems. Comparison is made for an 800 MWe fossil unit and a 1200 MWe nuclear unit located at a hypothetical midwestern river site. A set of models has been developed to optimize the components of each cooling system based on the local meteorological and hydrological conditions at the site in accordance with a fixed demand, scalable plant concept. This concept allows one to compare the costs of producing the same net power from each plant/cooling system. Base case economic parameters were used to evaluate the optimum system for each of the four general cooling systems followed by a sensitivity study for each parameter. Comparison of energy and water consumption follows from the results of the performance model, while comparison of environmental impacts is mostly qualitative. Some quantitative modelling was performed for the environmental effects of thermal discharges from once-through systems, fogging from wet cooling towers and water consumption from the ponds, wet towers and once-through. The results of the optimization models of each of the systems are compared on the basis of: performance - discrete distributions of environmental conditions and transient simulation; economics - using base case scenarios and sensitivity values to arrive at costs expressed in terms of production costs, annualized costs and present value costs; energy and water consumption; and environmental effects. The once-through systems were found to be the least expensive of the four systems, the most energy efficient, but potentially the most environmentally damaging. On the other extreme, dry cooling towers are the most environmentally sound while being the most expensive and least energy efficient. Finally, the results of the economic optimization are compared with results from previous comparative studies.
Author: Kenneth Fred Najjar
Publisher:
ISBN:
Category : Steam power plants
Languages : en
Pages : 187
Get Book Here
Book Description
The selection of waste heat rejection systems for steam-electric power plants involves a trade-off among environmental, energy and water conservation, and economic factors. This study compares four general types of cooling systems on the basis of these factors. The cooling systems chosen for study are: once-through systems including surface canals and submerged multiport diffusers; shallow closed cycle cooling ponds; mechanical and natural draft evaporative cooling towers; and mechanical draft dry towers. The cooling system comparison involves, first, an optimization of each cooling system and then a comparison among optimal systems. Comparison is made for an 800 MWe fossil unit and a 1200 MWe nuclear unit located at a hypothetical midwestern river site. A set of models has been developed to optimize the components of each cooling system based on the local meteorological and hydrological conditions at the site in accordance with a fixed demand, scalable plant concept. This concept allows one to compare the costs of producing the same net power from each plant/cooling system. Base case economic parameters were used to evaluate the optimum system for each of the four general cooling systems followed by a sensitivity study for each parameter. Comparison of energy and water consumption follows from the results of the performance model, while comparison of environmental impacts is mostly qualitative. Some quantitative modelling was performed for the environmental effects of thermal discharges from once-through systems, fogging from wet cooling towers and water consumption from the ponds, wet towers and once-through. The results of the optimization models of each of the systems are compared on the basis of: performance - discrete distributions of environmental conditions and transient simulation; economics - using base case scenarios and sensitivity values to arrive at costs expressed in terms of production costs, annualized costs and present value costs; energy and water consumption; and environmental effects. The once-through systems were found to be the least expensive of the four systems, the most energy efficient, but potentially the most environmentally damaging. On the other extreme, dry cooling towers are the most environmentally sound while being the most expensive and least energy efficient. Finally, the results of the economic optimization are compared with results from previous comparative studies.
Author:
Publisher:
ISBN:
Category : Electric power-plants
Languages : en
Pages : 62
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 506
Get Book Here
Book Description
Author: Massachusetts Institute of Technology. Energy Laboratory
Publisher:
ISBN:
Category : Cooling towers
Languages : en
Pages : 114
Get Book Here
Book Description
Current and anticipated thermal pollution regulations will prevent many new steam electric power plants from operating with once-through cooling. Alternative cooling systems acceptable from an environmental view fail to operate with the same efficiencies, in terms of resources consumed per Kwh of electricity produced, offered by once-through cooling systems. As a consequence there are clear conflicts between meeting environmental objectives and meeting minimum cost and minimum resource consumption objectives. This report examines, at both the regional and national level, the costs of satisfying environmental objectives through the existing thermal pollution regulations. This study forecasts the costs of operating those megawatts of new generating capacity to be installed between the years 1975 and 2000 which will be required to install closed cycle cooling solely to comply with thermal regulations. A regionally disaggregated approach is used in the forecasts in order to preserve as much of the anticipated inter-regional variation in future capacity growth rates and economic trends as possible. The net costs of closed cycle cooling over once- through cooling are based on comparisons of the costs of owning and operating optimal closed and open-cycle cooling configurations in separate regions, using computer codes to simulate joint power plant/ cooling system operation. The expected future costs of current thermal pollution regulations are determined for the mutually exclusive - collectively exhaustive eighteen Water Resources Council Regions within the contiguous U.S., and are expressed in terms of additional dollar expenditures, water losses and energy consumption. These costs are then compared with the expected resource commitments associated with the normal operation of the steam electric power industry. It is found that while energy losses appear to be small, the dollar costs could threaten the profitability of those utility systems which have historically used once-through cooling extensively throughout their system. In addition the additional water demands of closed cycle cooling are likely to disrupt the water supplies in those coastal areas having few untapped freshwater supplies available.
Author:
Publisher:
ISBN:
Category : Energy development
Languages : en
Pages : 272
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Weights and measures
Languages : en
Pages : 964
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Environmental policy
Languages : en
Pages : 524
Get Book Here
Book Description
Author: Paul H. Cootner
Publisher: Routledge
ISBN: 1317513886
Category : Science
Languages : en
Pages : 159
Get Book Here
Book Description
In this book, first published in 1965, the authors identify the technological opportunities and costs of water recirculation and water quality adjustment in thermal plants, relating them to the possibilities for minimal expenditure and maximum efficiency in the use of water for servicing an entire region with thermal power. Water Demand for Steam Electric Generation will be of interest to students of environmental studies.
Author: United States. Superintendent of Documents
Publisher:
ISBN:
Category : United States
Languages : en
Pages : 1408
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Nuclear energy
Languages : en
Pages : 764
Get Book Here
Book Description