Author: Richard F. Tinder
Publisher:
ISBN: 9780132117807
Category : Digital electronics
Languages : en
Pages : 685
Book Description
Provides modern approaches to the design and analysis of digital systems. Coverage begins with an elementary treatment of switches, moves through the fundamentals of combinational logic design, and then concentrates on synchronous and asynchronous sequential machine design.
Digital Engineering Design
Author: Richard F. Tinder
Publisher:
ISBN: 9780132117807
Category : Digital electronics
Languages : en
Pages : 685
Book Description
Provides modern approaches to the design and analysis of digital systems. Coverage begins with an elementary treatment of switches, moves through the fundamentals of combinational logic design, and then concentrates on synchronous and asynchronous sequential machine design.
Publisher:
ISBN: 9780132117807
Category : Digital electronics
Languages : en
Pages : 685
Book Description
Provides modern approaches to the design and analysis of digital systems. Coverage begins with an elementary treatment of switches, moves through the fundamentals of combinational logic design, and then concentrates on synchronous and asynchronous sequential machine design.
The Essence of Digital Design
Author: Barry Wilkinson
Publisher:
ISBN:
Category : Computers
Languages : en
Pages : 248
Book Description
Wilkinson provides a concise introduction to all the fundamental aspects of digital logic design, covering state diagrams, including those with transitional expressions, and programmable logic devices. He also looks at basic fault-testing.
Publisher:
ISBN:
Category : Computers
Languages : en
Pages : 248
Book Description
Wilkinson provides a concise introduction to all the fundamental aspects of digital logic design, covering state diagrams, including those with transitional expressions, and programmable logic devices. He also looks at basic fault-testing.
Digital Control Engineering
Author: M. Sami Fadali
Publisher: Academic Press
ISBN: 012398324X
Category : Computers
Languages : en
Pages : 602
Book Description
Digital controllers are part of nearly all modern personal, industrial, and transportation systems. Every senior or graduate student of electrical, chemical or mechanical engineering should therefore be familiar with the basic theory of digital controllers. This new text covers the fundamental principles and applications of digital control engineering, with emphasis on engineering design. Fadali and Visioli cover analysis and design of digitally controlled systems and describe applications of digital controls in a wide range of fields. With worked examples and Matlab applications in every chapter and many end-of-chapter assignments, this text provides both theory and practice for those coming to digital control engineering for the first time, whether as a student or practicing engineer. - Extensive Use of computational tools: Matlab sections at end of each chapter show how to implement concepts from the chapter - Frees the student from the drudgery of mundane calculations and allows him to consider more subtle aspects of control system analysis and design - An engineering approach to digital controls: emphasis throughout the book is on design of control systems. Mathematics is used to help explain concepts, but throughout the text discussion is tied to design and implementation. For example coverage of analog controls in chapter 5 is not simply a review, but is used to show how analog control systems map to digital control systems - Review of Background Material: contains review material to aid understanding of digital control analysis and design. Examples include discussion of discrete-time systems in time domain and frequency domain (reviewed from linear systems course) and root locus design in s-domain and z-domain (reviewed from feedback control course) - Inclusion of Advanced Topics - In addition to the basic topics required for a one semester senior/graduate class, the text includes some advanced material to make it suitable for an introductory graduate level class or for two quarters at the senior/graduate level. Examples of optional topics are state-space methods, which may receive brief coverage in a one semester course, and nonlinear discrete-time systems - Minimal Mathematics Prerequisites - The mathematics background required for understanding most of the book is based on what can be reasonably expected from the average electrical, chemical or mechanical engineering senior. This background includes three semesters of calculus, differential equations and basic linear algebra. Some texts on digital control require more
Publisher: Academic Press
ISBN: 012398324X
Category : Computers
Languages : en
Pages : 602
Book Description
Digital controllers are part of nearly all modern personal, industrial, and transportation systems. Every senior or graduate student of electrical, chemical or mechanical engineering should therefore be familiar with the basic theory of digital controllers. This new text covers the fundamental principles and applications of digital control engineering, with emphasis on engineering design. Fadali and Visioli cover analysis and design of digitally controlled systems and describe applications of digital controls in a wide range of fields. With worked examples and Matlab applications in every chapter and many end-of-chapter assignments, this text provides both theory and practice for those coming to digital control engineering for the first time, whether as a student or practicing engineer. - Extensive Use of computational tools: Matlab sections at end of each chapter show how to implement concepts from the chapter - Frees the student from the drudgery of mundane calculations and allows him to consider more subtle aspects of control system analysis and design - An engineering approach to digital controls: emphasis throughout the book is on design of control systems. Mathematics is used to help explain concepts, but throughout the text discussion is tied to design and implementation. For example coverage of analog controls in chapter 5 is not simply a review, but is used to show how analog control systems map to digital control systems - Review of Background Material: contains review material to aid understanding of digital control analysis and design. Examples include discussion of discrete-time systems in time domain and frequency domain (reviewed from linear systems course) and root locus design in s-domain and z-domain (reviewed from feedback control course) - Inclusion of Advanced Topics - In addition to the basic topics required for a one semester senior/graduate class, the text includes some advanced material to make it suitable for an introductory graduate level class or for two quarters at the senior/graduate level. Examples of optional topics are state-space methods, which may receive brief coverage in a one semester course, and nonlinear discrete-time systems - Minimal Mathematics Prerequisites - The mathematics background required for understanding most of the book is based on what can be reasonably expected from the average electrical, chemical or mechanical engineering senior. This background includes three semesters of calculus, differential equations and basic linear algebra. Some texts on digital control require more
Digital Systems Engineering
Author: William J. Dally
Publisher: Cambridge University Press
ISBN: 1139936239
Category : Computers
Languages : en
Pages : 944
Book Description
What makes some computers slow? Why do some digital systems operate reliably for years while others fail mysteriously every few hours? How can some systems dissipate kilowatts while others operate off batteries? These questions of speed, reliability, and power are all determined by the system-level electrical design of a digital system. Digital Systems Engineering presents a comprehensive treatment of these topics. It combines a rigorous development of the fundamental principles in each area with real-world examples of circuits and methods. The book not only serves as an undergraduate textbook, filling the gap between circuit design and logic design, but can also help practising digital designers keep pace with the speed and power of modern integrated circuits. The techniques described in this book, once used only in supercomputers, are essential to the correct and efficient operation of any type of digital system.
Publisher: Cambridge University Press
ISBN: 1139936239
Category : Computers
Languages : en
Pages : 944
Book Description
What makes some computers slow? Why do some digital systems operate reliably for years while others fail mysteriously every few hours? How can some systems dissipate kilowatts while others operate off batteries? These questions of speed, reliability, and power are all determined by the system-level electrical design of a digital system. Digital Systems Engineering presents a comprehensive treatment of these topics. It combines a rigorous development of the fundamental principles in each area with real-world examples of circuits and methods. The book not only serves as an undergraduate textbook, filling the gap between circuit design and logic design, but can also help practising digital designers keep pace with the speed and power of modern integrated circuits. The techniques described in this book, once used only in supercomputers, are essential to the correct and efficient operation of any type of digital system.
Engineering Digital Design
Author: Richard F. Tinder
Publisher: Elsevier
ISBN: 0080505651
Category : Technology & Engineering
Languages : en
Pages : 913
Book Description
Engineering Digital Design, Second Edition provides the most extensive coverage of any available textbook in digital logic and design. The new REVISED Second Edition published in September of 2002 provides 5 productivity tools free on the accompanying CD ROM. This software is also included on the Instructor's Manual CD ROM and complete instructions accompany each software program.In the REVISED Second Edition modern notation combines with state-of-the-art treatment of the most important subjects in digital design to provide the student with the background needed to enter industry or graduate study at a competitive level. Combinatorial logic design and synchronous and asynchronous sequential machine design methods are given equal weight, and new ideas and design approaches are explored. The productivity tools provided on the accompanying CD are outlined below:[1] EXL-Sim2002 logic simulator: EXL-Sim2002 is a full-featured, interactive, schematic-capture and simulation program that is ideally suited for use with the text at either the entry or advanced-level of logic design. Its many features include drag-and-drop capability, rubber banding, mixed logic and positive logic simulations, macro generation, individual and global (or randomized) delay assignments, connection features that eliminate the need for wire connections, schematic page sizing and zooming, waveform zooming and scrolling, a variety of printout capabilities, and a host of other useful features. [2] BOOZER logic minimizer: BOOZER is a software minimization tool that is recommended for use with the text. It accepts entered variable (EV) or canonical (1's and 0's) data from K-maps or truth tables, with or without don't cares, and returns an optimal or near optimal single or multi-output solution. It can handle up to 12 functions Boolean functions and as many inputs when used on modern computers. [3] ESPRESSO II logic minimizer: ESPRESSO II is another software minimization tool widely used in schools and industry. It supports advanced heuristic algorithms for minimization of two-level, multi-output Boolean functions but does not accept entered variables. It is also readily available from the University of California, Berkeley, 1986 VLSI Tools Distribution. [4] ADAM design software: ADAM (for Automated Design of Asynchronous Machines) is a very powerful productivity tool that permits the automated design of very complex asynchronous state machines, all free of timing defects. The input files are state tables for the desired state machines. The output files are given in the Berkeley format appropriate for directly programming PLAs. ADAM also allows the designer to design synchronous state machines, timing-defect-free. The options include the lumped path delay (LPD) model or NESTED CELL model for asynchronous FSM designs, and the use of D FLIP-FLOPs for synchronous FSM designs. The background for the use of ADAM is covered in Chapters 11, 14 and 16 of the REVISED 2nd Edition.[5] A-OPS design software: A-OPS (for Asynchronous One-hot Programmable Sequencers) is another very powerful productivity tool that permits the design of asynchronous and synchronous state machines by using a programmable sequencer kernel. This software generates a PLA or PAL output file (in Berkeley format) or the VHDL code for the automated timing-defect-free designs of the following: (a) Any 1-Hot programmable sequencer up to 10 states. (b) The 1-Hot design of multiple asynchronous or synchronous state machines driven by either PLDs or RAM. The input file is that of a state table for the desired state machine. This software can be used to design systems with the capability of instantly switching between several radically different controllers on a time-shared basis. The background for the use of A-OPS is covered in Chapters 13, 14 and 16 of the REVISED 2nd Edition.
Publisher: Elsevier
ISBN: 0080505651
Category : Technology & Engineering
Languages : en
Pages : 913
Book Description
Engineering Digital Design, Second Edition provides the most extensive coverage of any available textbook in digital logic and design. The new REVISED Second Edition published in September of 2002 provides 5 productivity tools free on the accompanying CD ROM. This software is also included on the Instructor's Manual CD ROM and complete instructions accompany each software program.In the REVISED Second Edition modern notation combines with state-of-the-art treatment of the most important subjects in digital design to provide the student with the background needed to enter industry or graduate study at a competitive level. Combinatorial logic design and synchronous and asynchronous sequential machine design methods are given equal weight, and new ideas and design approaches are explored. The productivity tools provided on the accompanying CD are outlined below:[1] EXL-Sim2002 logic simulator: EXL-Sim2002 is a full-featured, interactive, schematic-capture and simulation program that is ideally suited for use with the text at either the entry or advanced-level of logic design. Its many features include drag-and-drop capability, rubber banding, mixed logic and positive logic simulations, macro generation, individual and global (or randomized) delay assignments, connection features that eliminate the need for wire connections, schematic page sizing and zooming, waveform zooming and scrolling, a variety of printout capabilities, and a host of other useful features. [2] BOOZER logic minimizer: BOOZER is a software minimization tool that is recommended for use with the text. It accepts entered variable (EV) or canonical (1's and 0's) data from K-maps or truth tables, with or without don't cares, and returns an optimal or near optimal single or multi-output solution. It can handle up to 12 functions Boolean functions and as many inputs when used on modern computers. [3] ESPRESSO II logic minimizer: ESPRESSO II is another software minimization tool widely used in schools and industry. It supports advanced heuristic algorithms for minimization of two-level, multi-output Boolean functions but does not accept entered variables. It is also readily available from the University of California, Berkeley, 1986 VLSI Tools Distribution. [4] ADAM design software: ADAM (for Automated Design of Asynchronous Machines) is a very powerful productivity tool that permits the automated design of very complex asynchronous state machines, all free of timing defects. The input files are state tables for the desired state machines. The output files are given in the Berkeley format appropriate for directly programming PLAs. ADAM also allows the designer to design synchronous state machines, timing-defect-free. The options include the lumped path delay (LPD) model or NESTED CELL model for asynchronous FSM designs, and the use of D FLIP-FLOPs for synchronous FSM designs. The background for the use of ADAM is covered in Chapters 11, 14 and 16 of the REVISED 2nd Edition.[5] A-OPS design software: A-OPS (for Asynchronous One-hot Programmable Sequencers) is another very powerful productivity tool that permits the design of asynchronous and synchronous state machines by using a programmable sequencer kernel. This software generates a PLA or PAL output file (in Berkeley format) or the VHDL code for the automated timing-defect-free designs of the following: (a) Any 1-Hot programmable sequencer up to 10 states. (b) The 1-Hot design of multiple asynchronous or synchronous state machines driven by either PLDs or RAM. The input file is that of a state table for the desired state machine. This software can be used to design systems with the capability of instantly switching between several radically different controllers on a time-shared basis. The background for the use of A-OPS is covered in Chapters 13, 14 and 16 of the REVISED 2nd Edition.
Reinventing the Product
Author: Eric Schaeffer
Publisher: Kogan Page Publishers
ISBN: 0749484659
Category : Business & Economics
Languages : en
Pages : 393
Book Description
Create the personalized and compelling experiences that today's customers expect by harnessing AI and digital technologies to create smart connected products, with this cutting-edge guide from senior leaders at Accenture. Digital technology is both friend and foe: highly disruptive, yet it cannot be ignored. As traditional products transform into smart connected products faster than ever before, companies that fail to make use of it now put themselves in the firing line for disintermediation or even eradication. However, digital technology is also the biggest opportunity for product-making businesses to create the next generation of goods in the marketplace. In Reinventing the Product, Eric Schaeffer and David Sovie, both Senior Managing Directors at Accenture, show how this reinvention is made possible, to deliver truly intelligent, and often even autonomous, products. Reinventing the Product makes the case for companies to rethink their product strategy, innovation and engineering processes, including: - How to harness the opportunities of AI and digital technologies, such as IoT sensors, blockchain, advanced analytics, cloud and edge computing - Practical advice on transforming their entire culture to build the future of successful 'living products' - Features case studies from global organizations such as Faurecia, Signify, Symmons and Haier and interviews with thought leaders from top companies including Amazon, ABB, Tesla, Samsung and Google This book provides the only advice any product-making company needs as it embarks on, or accelerates, its digitization journey.
Publisher: Kogan Page Publishers
ISBN: 0749484659
Category : Business & Economics
Languages : en
Pages : 393
Book Description
Create the personalized and compelling experiences that today's customers expect by harnessing AI and digital technologies to create smart connected products, with this cutting-edge guide from senior leaders at Accenture. Digital technology is both friend and foe: highly disruptive, yet it cannot be ignored. As traditional products transform into smart connected products faster than ever before, companies that fail to make use of it now put themselves in the firing line for disintermediation or even eradication. However, digital technology is also the biggest opportunity for product-making businesses to create the next generation of goods in the marketplace. In Reinventing the Product, Eric Schaeffer and David Sovie, both Senior Managing Directors at Accenture, show how this reinvention is made possible, to deliver truly intelligent, and often even autonomous, products. Reinventing the Product makes the case for companies to rethink their product strategy, innovation and engineering processes, including: - How to harness the opportunities of AI and digital technologies, such as IoT sensors, blockchain, advanced analytics, cloud and edge computing - Practical advice on transforming their entire culture to build the future of successful 'living products' - Features case studies from global organizations such as Faurecia, Signify, Symmons and Haier and interviews with thought leaders from top companies including Amazon, ABB, Tesla, Samsung and Google This book provides the only advice any product-making company needs as it embarks on, or accelerates, its digitization journey.
Digital Transformation of the Design, Construction and Management Processes of the Built Environment
Author: Bruno Daniotti
Publisher: Springer Nature
ISBN: 3030335704
Category : Technology & Engineering
Languages : en
Pages : 391
Book Description
This open access book focuses on the development of methods, interoperable and integrated ICT tools, and survey techniques for optimal management of the building process. The construction sector is facing an increasing demand for major innovations in terms of digital dematerialization and technologies such as the Internet of Things, big data, advanced manufacturing, robotics, 3D printing, blockchain technologies and artificial intelligence. The demand for simplification and transparency in information management and for the rationalization and optimization of very fragmented and splintered processes is a key driver for digitization. The book describes the contribution of the ABC Department of the Polytechnic University of Milan (Politecnico di Milano) to R&D activities regarding methods and ICT tools for the interoperable management of the different phases of the building process, including design, construction, and management. Informative case studies complement the theoretical discussion. The book will be of interest to all stakeholders in the building process – owners, designers, constructors, and faculty managers – as well as the research sector.
Publisher: Springer Nature
ISBN: 3030335704
Category : Technology & Engineering
Languages : en
Pages : 391
Book Description
This open access book focuses on the development of methods, interoperable and integrated ICT tools, and survey techniques for optimal management of the building process. The construction sector is facing an increasing demand for major innovations in terms of digital dematerialization and technologies such as the Internet of Things, big data, advanced manufacturing, robotics, 3D printing, blockchain technologies and artificial intelligence. The demand for simplification and transparency in information management and for the rationalization and optimization of very fragmented and splintered processes is a key driver for digitization. The book describes the contribution of the ABC Department of the Polytechnic University of Milan (Politecnico di Milano) to R&D activities regarding methods and ICT tools for the interoperable management of the different phases of the building process, including design, construction, and management. Informative case studies complement the theoretical discussion. The book will be of interest to all stakeholders in the building process – owners, designers, constructors, and faculty managers – as well as the research sector.
e-Design
Author: Kuang-Hua Chang
Publisher: Academic Press
ISBN: 0128097361
Category : Computers
Languages : en
Pages : 1228
Book Description
e-Design: Computer-Aided Engineering Design, Revised First Edition is the first book to integrate a discussion of computer design tools throughout the design process. Through the use of this book, the reader will understand basic design principles and all-digital design paradigms, the CAD/CAE/CAM tools available for various design related tasks, how to put an integrated system together to conduct All-Digital Design (ADD), industrial practices in employing ADD, and tools for product development. - Comprehensive coverage of essential elements for understanding and practicing the e-Design paradigm in support of product design, including design method and process, and computer based tools and technology - Part I: Product Design Modeling discusses virtual mockup of the product created in the CAD environment, including not only solid modeling and assembly theories, but also the critical design parameterization that converts the product solid model into parametric representation, enabling the search for better design alternatives - Part II: Product Performance Evaluation focuses on applying CAE technologies and software tools to support evaluation of product performance, including structural analysis, fatigue and fracture, rigid body kinematics and dynamics, and failure probability prediction and reliability analysis - Part III: Product Manufacturing and Cost Estimating introduces CAM technology to support manufacturing simulations and process planning, sheet forming simulation, RP technology and computer numerical control (CNC) machining for fast product prototyping, as well as manufacturing cost estimate that can be incorporated into product cost calculations - Part IV: Design Theory and Methods discusses modern decision-making theory and the application of the theory to engineering design, introduces the mainstream design optimization methods for both single and multi-objectives problems through both batch and interactive design modes, and provides a brief discussion on sensitivity analysis, which is essential for designs using gradient-based approaches - Tutorial lessons and case studies are offered for readers to gain hands-on experiences in practicing e-Design paradigm using two suites of engineering software: Pro/ENGINEER-based, including Pro/MECHANICA Structure, Pro/ENGINEER Mechanism Design, and Pro/MFG; and SolidWorks-based, including SolidWorks Simulation, SolidWorks Motion, and CAMWorks. Available on the companion website http://booksite.elsevier.com/9780123820389
Publisher: Academic Press
ISBN: 0128097361
Category : Computers
Languages : en
Pages : 1228
Book Description
e-Design: Computer-Aided Engineering Design, Revised First Edition is the first book to integrate a discussion of computer design tools throughout the design process. Through the use of this book, the reader will understand basic design principles and all-digital design paradigms, the CAD/CAE/CAM tools available for various design related tasks, how to put an integrated system together to conduct All-Digital Design (ADD), industrial practices in employing ADD, and tools for product development. - Comprehensive coverage of essential elements for understanding and practicing the e-Design paradigm in support of product design, including design method and process, and computer based tools and technology - Part I: Product Design Modeling discusses virtual mockup of the product created in the CAD environment, including not only solid modeling and assembly theories, but also the critical design parameterization that converts the product solid model into parametric representation, enabling the search for better design alternatives - Part II: Product Performance Evaluation focuses on applying CAE technologies and software tools to support evaluation of product performance, including structural analysis, fatigue and fracture, rigid body kinematics and dynamics, and failure probability prediction and reliability analysis - Part III: Product Manufacturing and Cost Estimating introduces CAM technology to support manufacturing simulations and process planning, sheet forming simulation, RP technology and computer numerical control (CNC) machining for fast product prototyping, as well as manufacturing cost estimate that can be incorporated into product cost calculations - Part IV: Design Theory and Methods discusses modern decision-making theory and the application of the theory to engineering design, introduces the mainstream design optimization methods for both single and multi-objectives problems through both batch and interactive design modes, and provides a brief discussion on sensitivity analysis, which is essential for designs using gradient-based approaches - Tutorial lessons and case studies are offered for readers to gain hands-on experiences in practicing e-Design paradigm using two suites of engineering software: Pro/ENGINEER-based, including Pro/MECHANICA Structure, Pro/ENGINEER Mechanism Design, and Pro/MFG; and SolidWorks-based, including SolidWorks Simulation, SolidWorks Motion, and CAMWorks. Available on the companion website http://booksite.elsevier.com/9780123820389
Engineering the Digital Transformation
Author: Gary Gruver
Publisher: Bookbaby
ISBN: 9781543975260
Category : Computers
Languages : en
Pages : 184
Book Description
I see it all the time: Businesses implement the latest Agile and DevOps practices from thesoftware industry, hoping that simply doing so will provide the required improvements.But months and evenyears later, they're still struggling. Similarly, I watch the softwareindustry trying to learn and implement wholesale what the manufacturing industry didyears ago.As it turns out, we can't just copy what others have done. Businesses need to understandthe unique challenges of their company. And digital assets like software are very differentfrom physical assets that are manufactured. Every business is different, and softwaredevelopment is different from manufacturing.Engineering the Digital Transformation provides systematic approaches to improvinghow software is developed for a broad range of applications. This book focuses on high-level principles for engineering improvements, leveraging as much as possible frommanufacturing, and modifies them toaddress the unique characteristics and capabilitiesof software.
Publisher: Bookbaby
ISBN: 9781543975260
Category : Computers
Languages : en
Pages : 184
Book Description
I see it all the time: Businesses implement the latest Agile and DevOps practices from thesoftware industry, hoping that simply doing so will provide the required improvements.But months and evenyears later, they're still struggling. Similarly, I watch the softwareindustry trying to learn and implement wholesale what the manufacturing industry didyears ago.As it turns out, we can't just copy what others have done. Businesses need to understandthe unique challenges of their company. And digital assets like software are very differentfrom physical assets that are manufactured. Every business is different, and softwaredevelopment is different from manufacturing.Engineering the Digital Transformation provides systematic approaches to improvinghow software is developed for a broad range of applications. This book focuses on high-level principles for engineering improvements, leveraging as much as possible frommanufacturing, and modifies them toaddress the unique characteristics and capabilitiesof software.
Data-Driven Engineering Design
Author: Ang Liu
Publisher: Springer Nature
ISBN: 3030881814
Category : Technology & Engineering
Languages : en
Pages : 203
Book Description
This book addresses the emerging paradigm of data-driven engineering design. In the big-data era, data is becoming a strategic asset for global manufacturers. This book shows how the power of data can be leveraged to drive the engineering design process, in particular, the early-stage design. Based on novel combinations of standing design methodology and the emerging data science, the book presents a collection of theoretically sound and practically viable design frameworks, which are intended to address a variety of critical design activities including conceptual design, complexity management, smart customization, smart product design, product service integration, and so forth. In addition, it includes a number of detailed case studies to showcase the application of data-driven engineering design. The book concludes with a set of promising research questions that warrant further investigation. Given its scope, the book will appeal to a broad readership, including postgraduate students, researchers, lecturers, and practitioners in the field of engineering design.
Publisher: Springer Nature
ISBN: 3030881814
Category : Technology & Engineering
Languages : en
Pages : 203
Book Description
This book addresses the emerging paradigm of data-driven engineering design. In the big-data era, data is becoming a strategic asset for global manufacturers. This book shows how the power of data can be leveraged to drive the engineering design process, in particular, the early-stage design. Based on novel combinations of standing design methodology and the emerging data science, the book presents a collection of theoretically sound and practically viable design frameworks, which are intended to address a variety of critical design activities including conceptual design, complexity management, smart customization, smart product design, product service integration, and so forth. In addition, it includes a number of detailed case studies to showcase the application of data-driven engineering design. The book concludes with a set of promising research questions that warrant further investigation. Given its scope, the book will appeal to a broad readership, including postgraduate students, researchers, lecturers, and practitioners in the field of engineering design.