Author: Jason Matthew Franco
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description

Author: Robert J. Frosch
Publisher:
ISBN: 9781622602445
Category : Transportation
Languages : en
Pages :

Get Book Here

Book Description
Integral abutment bridges have been used in the United States for decades. By eliminating expensive expansion joints, the piles supporting the end bent accommodate the total thermal movement of the bridge. Currently, integral bridges are designed based upon experience, and a rational design specification has not been developed. Furthermore, the interaction of the abutment, pile, and soil remains uncertain. A better understanding regarding the behavior of this system is needed. The objective of this research is to evaluate the behavior of the integral abutment-pile system and evaluate any limitations of its use. To achieve this objective, two phases of research were conducted. The first phase was a field study that investigated the in-service pile behavior of four integral abutment bridges. The second phase was an experimental study that was used to evaluate the capability of piles typically used in integral abutment bridges. Nine low-cycle, large amplitude lateral displacement pile tests were conducted. Throughout both phases, analytical investigations were also conducted. To develop simplified modeling techniques that sufficiently account for soil-pile interaction, the piles supporting abutments were analytically modeled and calibrated based on the field and experimental results. A parametric study was also performed with variables including pile type, pile orientation, axial load, pile length, and soil type. The results of these phases were evaluated and design recommendations were developed based on these results. Overall, the design recommendations provide for an extension in the length limits often used for integral bridges. The extension of these limits can result in a reduction in bridge construction and maintenance costs for a large number of structures that cannot currently be built using this structural system.

Author: Amir S. Gilani
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 164

Get Book Here

Book Description

Author:
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 176

Get Book Here

Book Description

Author: Yu Hong
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
Many transportation agencies in Canada and the United States have explored alternatives to expansion joints in bridges due to high maintenance costs and poor joint durability. One of the alternatives is the use of link slab in a jointless bridge, which connects the adjacent bridge deck slabs at the pier, forming a continuous slab across the bridge spans. While the link slab system can provide the benefits of a continuous bridge deck, refinement of the design and detailing of the link slab itself is needed to optimize this bridge deck system and ensure long-term performance. Materials with high tensile strain capacity, such as fibre reinforced concrete (FRC), can be used for application in the link slab to improve the strength, durability and cracking characteristics of the link slab. In this study, four steps are used to address the research objectives. The first step of this research is to establish a computational model of an existing bridge (Camlachie Road Underpass). It is found that the model and modelling approach in SAP2000 closely predicted the field test results obtained by the Ministry of Transportation of Ontario (MTO). Additionally, it is established that the horizontal stiffness of the elastomeric bearings is very low and therefore the supports are representative of roller supports. Therefore, axial forces are not generated when there are no horizontal restraints in the supports. The second step is to examine the properties of FRC from experimental tests. Four-point bending tests are used to estimate the ultimate and service stresses of FRC using procedures from the fib Model Code (2010). It is found that the results from the fib Model Code are in agreement with the experimental beam tests by Cameron. Therefore, it is concluded that the fib Model Code procedures are valid for calculating the ultimate and service stresses in FRC, and are used in the computational and analytical models. The third step is to conduct a parametric study to provide a better understanding of link slab bridge behaviour to assess the impact of design decisions on the bridge response. It is found that the use of hooked steel fibres minimized the crack width of the link slab, and a debonded length a 5% to 7.5% is found to be optimal based on cost and serviceability. Moreover, it is found that fibres are more effective when less steel reinforcements are used in the link slab. Lastly, a parametric study is conducted on the computational model using non-linear analysis by including FRC in the computational model in the form of plastic hinges. It is concluded that the computational model has shown signs of cracking at the pier supports, which is consistent with the site observations during the MTO field test for the Camlachie Road Underpass. The final step is developing an analytical model (i.e., design guideline) on the analysis and design of link slab bridges with FRC. It is found that the proposed analytical model is able to closely represent the link slab bridge behaviour with very small difference (2-3%), whereas the current method of analysis using Caner and Zia's approach shows a larger prediction error (16%). For the link slab design with FRC, it is found that fibres in reinforced concrete helped increase the bending moment capacity of the link slab by more than 10% compared to normal reinforced concrete (without fibres). The use of polypropylene fibres and hooked steel fibres in the link slab reduces the required steel reinforcement by 3.5% and 21%, respectively, and the crack width of the link slab reduces by more than 3 times with the addition of fibres.

Author:
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 278

Get Book Here

Book Description
Pt. 1: The opportunity for the field testing of an isolated viaduct arose out of the demolition and reconstruction of the I-680/R-24 interchange in Walnut Creek, California. The southern section of the temporary separator bridge is seismically isolated, and this portion was the subject of a three-phase field study. This viaduct is the first new bridge in California to be seismically isolated. The primary objective of this investigation was to collect field data for the determination of the dynamic properties (mode shapes, modal frequencies, and damping ratios) of the viaduct, to assess the contribution of different structural components to the overall flexibility and damping characteristics of the structure, and to conduct analytical studies to verify the experimentally computed dynamic properties.

Author: Eva Lantsoght
Publisher: CRC Press
ISBN: 0429556489
Category : Technology & Engineering
Languages : en
Pages : 429

Get Book Here

Book Description
Load Testing of Bridges, featuring contributions from almost fifty authors from around the world across two interrelated volumes, deals with the practical aspects, the scientific developments, and the international views on the topic of load testing of bridges. Volume 13, Load Testing of Bridges: Proof Load Testing and the Future of Load Testing, focuses first on proof load testing of bridges. It discusses the specific aspects of proof load testing during the preparation, execution, and post-processing of such a test (Part 1). The second part covers the testing of buildings. The third part discusses novel ideas regarding measurement techniques used for load testing. Methods using non-contact sensors, such as photography- and video-based measurement techniques are discussed. The fourth part discusses load testing in the framework of reliability-based decision-making and in the framework of a bridge management program. The final part of the book summarizes the knowledge presented across the two volumes, as well as the remaining open questions for research, and provides practical recommendations for engineers carrying out load tests. This work will be of interest to researchers and academics in the field of civil/structural engineering, practicing engineers and road authorities worldwide.

Author: Hiroshi Yokota
Publisher: CRC Press
ISBN: 1000173755
Category : Technology & Engineering
Languages : en
Pages : 926

Get Book Here

Book Description
Bridge Maintenance, Safety, Management, Life-Cycle Sustainability and Innovations contains lectures and papers presented at the Tenth International Conference on Bridge Maintenance, Safety and Management (IABMAS 2020), held in Sapporo, Hokkaido, Japan, April 11–15, 2021. This volume consists of a book of extended abstracts and a USB card containing the full papers of 571 contributions presented at IABMAS 2020, including the T.Y. Lin Lecture, 9 Keynote Lectures, and 561 technical papers from 40 countries. The contributions presented at IABMAS 2020 deal with the state of the art as well as emerging concepts and innovative applications related to the main aspects of maintenance, safety, management, life-cycle sustainability and technological innovations of bridges. Major topics include: advanced bridge design, construction and maintenance approaches, safety, reliability and risk evaluation, life-cycle management, life-cycle sustainability, standardization, analytical models, bridge management systems, service life prediction, maintenance and management strategies, structural health monitoring, non-destructive testing and field testing, safety, resilience, robustness and redundancy, durability enhancement, repair and rehabilitation, fatigue and corrosion, extreme loads, and application of information and computer technology and artificial intelligence for bridges, among others. This volume provides both an up-to-date overview of the field of bridge engineering and significant contributions to the process of making more rational decisions on maintenance, safety, management, life-cycle sustainability and technological innovations of bridges for the purpose of enhancing the welfare of society. The Editors hope that these Proceedings will serve as a valuable reference to all concerned with bridge structure and infrastructure systems, including engineers, researchers, academics and students from all areas of bridge engineering.

Author: Eva Lantsoght
Publisher: CRC Press
ISBN: 0429555970
Category : Technology & Engineering
Languages : en
Pages : 347

Get Book Here

Book Description
Load Testing of Bridges, featuring contributions from almost fifty authors from around the world across two interrelated volumes, deals with the practical aspects, the scientific developments, and the international views on the topic of load testing of bridges. Volume 12, Load Testing of Bridges: Current practice and Diagnostic Load Testing, starts with a background to bridge load testing, including the historical perspectives and evolutions, and the current codes and guidelines that are governing in countries around the world. The second part of the book deals with preparation, execution, and post-processing of load tests on bridges. The third part focuses on diagnostic load testing of bridges. This work will be of interest to researchers and academics in the field of civil/structural engineering, practicing engineers and road authorities worldwide.

Author: Holly Ann Boomsma
Publisher:
ISBN:
Category :
Languages : en
Pages : 226

Get Book Here

Book Description
The viability of utilizing railroad flatcars (RRFCs) as the superstructure for low-volume road bridges has been investigated in previous research. In this research, the RRFC bridge concept was expanded to investigate additional construction variables, methods to improve performance and reduce cost, as well as refining the previously developed design methodology. These objectives were accomplished by field testing two bridges - one in Buchanan County and one in Winnebago County, Iowa - and examining the data obtained from those tests. Both the Buchanan County Bridge (BCB3) and the Winnebago County Bridge (WCB2) were constructed using three 89-ft RRFCs; the railcars were "trimmed" to meet the span requirements of each site. The BCB3 was 26 ft - 5 1/2 in. wide with a single span of 66 ft - 2 in. The abutments were constructed with five steel piles embedded into the concrete caps; supports at both reinforced concrete abutments restricted only vertical movement. A bolted longitudinal connection was used to join adjacent RRFCs, and a gravel driving surface was added. The WCB2 was 27 ft - 0 in. wide with a main span length of 66 ft - 4 in. and 2 ft - 4 1/2 in. overhangs. The abutments consisted of six steel piles and steel caps with sheetpile backwalls at the end of the overhangs. Supports at the east abutment were welded, while those at the west abutment were restrained only in the vertical direction. Timber planks were added for additional transverse live load distribution, and a gravel diving surface was also installed. The BCB3 and WCB2 were instrumented with deflection and strain transducers and the data collected were used to analyze the bridges' behaviors. For the trucks used in the field tests, measured deflections and strains (stresses) were below AASHTO live load deflection and stress limitations. Since truck weights used in the field tests were below those of design trucks, the deflections and strains (stresses) were theoretically increased to reflect the increased weight. These values were slightly greater than AASHTO deflection and stress limitations. Results from this research verified that RRFC bridges are an economical bridge replacement on low-volume roads if they are correctly engineered.