Author: S. B. Batdorf
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 38
Book Description
Summary: An exact solution and a closely concurring approximate energy solution are given for the buckling of an infinitely long flat plate under combined shear and transverse direct stress with edges elastically restrained against rotation. It was found that an appreciable fraction of the critical stress in pure shear may be applied to the plate without any reduction in the transverse compressive stress necessary to produce buckling. An interaction formula in general use was shown to be decidedly conservative for the range in which it is supposed to apply.
Critical Combinations of Shear and Transverse Direct Stress for an Infinitely Long Flat Plate with Edges Elastically Restrained Against Rotation
Author: S. B. Batdorf
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 38
Book Description
Summary: An exact solution and a closely concurring approximate energy solution are given for the buckling of an infinitely long flat plate under combined shear and transverse direct stress with edges elastically restrained against rotation. It was found that an appreciable fraction of the critical stress in pure shear may be applied to the plate without any reduction in the transverse compressive stress necessary to produce buckling. An interaction formula in general use was shown to be decidedly conservative for the range in which it is supposed to apply.
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 38
Book Description
Summary: An exact solution and a closely concurring approximate energy solution are given for the buckling of an infinitely long flat plate under combined shear and transverse direct stress with edges elastically restrained against rotation. It was found that an appreciable fraction of the critical stress in pure shear may be applied to the plate without any reduction in the transverse compressive stress necessary to produce buckling. An interaction formula in general use was shown to be decidedly conservative for the range in which it is supposed to apply.
Critical Combinations of Shear and Transverse Direct Stress for an Infinitely Long Flat Plate with Edges Elastically Restrained Against Rotation
Author: S.B. Batdorf
Publisher:
ISBN:
Category :
Languages : en
Pages : 8
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 8
Book Description
Critical Combinations of Longitudinal and Transverse Direct Stress for an Infinitely Long Flat Plate with Edges Elastically Restrained Against Rotation
Author: S. B. Batdorf
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 24
Book Description
A theoretical Investigation was made of the buckling of an infinitely long flat plate with edges elastically restrained against rotation under combinations of longitudinal are presented that give the critical combinations of stress for several different degrees of elastic edge restraints Including simple support and complete fixity. It was found that an appreciable fraction of the critical longitudinal stress may be applied to the plate without any reduction in the transverse compressive stress required for buckling.
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 24
Book Description
A theoretical Investigation was made of the buckling of an infinitely long flat plate with edges elastically restrained against rotation under combinations of longitudinal are presented that give the critical combinations of stress for several different degrees of elastic edge restraints Including simple support and complete fixity. It was found that an appreciable fraction of the critical longitudinal stress may be applied to the plate without any reduction in the transverse compressive stress required for buckling.
NEHRP Guidelines for the Seismic Rehabilitation of Buildings
Author:
Publisher:
ISBN:
Category : Buildings
Languages : en
Pages : 452
Book Description
Publisher:
ISBN:
Category : Buildings
Languages : en
Pages : 452
Book Description
Mechanical Properties of Ceramics
Author: John B. Wachtman
Publisher: John Wiley & Sons
ISBN: 9780470451502
Category : Technology & Engineering
Languages : en
Pages : 496
Book Description
A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Publisher: John Wiley & Sons
ISBN: 9780470451502
Category : Technology & Engineering
Languages : en
Pages : 496
Book Description
A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.
Design of Reinforced Concrete
Author: Jack C. McCormac
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 744
Book Description
Publisher Description
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 744
Book Description
Publisher Description
Intermediate Mechanics of Materials
Author: J. R. Barber
Publisher: Springer Science & Business Media
ISBN: 9400702957
Category : Science
Languages : en
Pages : 629
Book Description
This book covers the essential topics for a second-level course in strength of materials or mechanics of materials, with an emphasis on techniques that are useful for mechanical design. Design typically involves an initial conceptual stage during which many options are considered. At this stage, quick approximate analytical methods are crucial in determining which of the initial proposals are feasible. The ideal would be to get within 30% with a few lines of calculation. The designer also needs to develop experience as to the kinds of features in the geometry or the loading that are most likely to lead to critical conditions. With this in mind, the author tries wherever possible to give a physical and even an intuitive interpretation to the problems under investigation. For example, students are encouraged to estimate the location of weak and strong bending axes and the resulting neutral axis of bending before performing calculations, and the author discusses ways of getting good accuracy with a simple one degree of freedom Rayleigh-Ritz approximation. Students are also encouraged to develop a feeling for structural deformation by performing simple experiments in their outside environment, such as estimating the radius to which an initially straight bar can be bent without producing permanent deformation, or convincing themselves of the dramatic difference between torsional and bending stiffness for a thin-walled open beam section by trying to bend and then twist a structural steel beam by hand-applied loads at one end. In choosing dimensions for mechanical components, designers will expect to be guided by criteria of minimum weight, which with elementary calculations, generally leads to a thin-walled structure as an optimal solution. This consideration motivates the emphasis on thin-walled structures, but also demands that students be introduced to the limits imposed by structural instability. Emphasis is also placed on the effect of manufacturing errors on such highly-designed structures - for example, the effect of load misalignment on a beam with a large ratio between principal stiffness and the large magnification of initial alignment or loading errors in a strut below, but not too far below the buckling load. Additional material can be found on http://extras.springer.com/ .
Publisher: Springer Science & Business Media
ISBN: 9400702957
Category : Science
Languages : en
Pages : 629
Book Description
This book covers the essential topics for a second-level course in strength of materials or mechanics of materials, with an emphasis on techniques that are useful for mechanical design. Design typically involves an initial conceptual stage during which many options are considered. At this stage, quick approximate analytical methods are crucial in determining which of the initial proposals are feasible. The ideal would be to get within 30% with a few lines of calculation. The designer also needs to develop experience as to the kinds of features in the geometry or the loading that are most likely to lead to critical conditions. With this in mind, the author tries wherever possible to give a physical and even an intuitive interpretation to the problems under investigation. For example, students are encouraged to estimate the location of weak and strong bending axes and the resulting neutral axis of bending before performing calculations, and the author discusses ways of getting good accuracy with a simple one degree of freedom Rayleigh-Ritz approximation. Students are also encouraged to develop a feeling for structural deformation by performing simple experiments in their outside environment, such as estimating the radius to which an initially straight bar can be bent without producing permanent deformation, or convincing themselves of the dramatic difference between torsional and bending stiffness for a thin-walled open beam section by trying to bend and then twist a structural steel beam by hand-applied loads at one end. In choosing dimensions for mechanical components, designers will expect to be guided by criteria of minimum weight, which with elementary calculations, generally leads to a thin-walled structure as an optimal solution. This consideration motivates the emphasis on thin-walled structures, but also demands that students be introduced to the limits imposed by structural instability. Emphasis is also placed on the effect of manufacturing errors on such highly-designed structures - for example, the effect of load misalignment on a beam with a large ratio between principal stiffness and the large magnification of initial alignment or loading errors in a strut below, but not too far below the buckling load. Additional material can be found on http://extras.springer.com/ .
Fatigue and Fracture
Author: F. C. Campbell
Publisher: ASM International
ISBN: 1615039767
Category : Technology & Engineering
Languages : en
Pages : 699
Book Description
"This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.
Publisher: ASM International
ISBN: 1615039767
Category : Technology & Engineering
Languages : en
Pages : 699
Book Description
"This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.
Seismic Rehabilitation of Existing Buildings
Author: American Society of Civil Engineers
Publisher: ASCE Publications
ISBN:
Category : Architecture
Languages : en
Pages : 436
Book Description
Standard ASCE/SEI 41-06 presents the latest generation of performance-based seismic rehabilitation methodology.
Publisher: ASCE Publications
ISBN:
Category : Architecture
Languages : en
Pages : 436
Book Description
Standard ASCE/SEI 41-06 presents the latest generation of performance-based seismic rehabilitation methodology.
Reliability Design of Mechanical Systems
Author: Seongwoo Woo
Publisher: Springer
ISBN: 9811372365
Category : Technology & Engineering
Languages : en
Pages : 476
Book Description
The revised edition of this book offers an expanded overview of the reliability design of mechanical systems and describes the reliability methodology, including a parametric accelerated life test (ALT) plan, a load analysis, a tailored series of parametric ALTs with action plans, and an evaluation of the final designs to ensure the design requirements are satisfied. It covers both the quantitative and qualitative approaches of the reliability design forming in the development process of mechanical products, with a focus on parametric ALT and illustrated via case studies. This new reliability methodology – parametric ALT should help mechanical and civil engineers to uncover design parameters improving product design and avoiding recalls. Updated chapters cover product recalls and assessment of their significance, modern definitions in reliability engineering, parametric accelerated life testing in mechanical systems, and extended case studies. For this revised edition, one new chapter has been introduced to reflect recent developments in analysis of fluid motion and mechanical vibration. Other chapters are expanded and updated to improve the explanation of topics including structures and load analysis, failure mechanics, design and reliability testing, and mechanical system failure. The broad scope gives the reader an overview of the state-of-the-art in the reliability design of mechanical systems and an indication of future directions and applications. It will serve as a solid introduction to the field for advanced students, and a valuable reference for those working in the development of mechanical systems and related areas.
Publisher: Springer
ISBN: 9811372365
Category : Technology & Engineering
Languages : en
Pages : 476
Book Description
The revised edition of this book offers an expanded overview of the reliability design of mechanical systems and describes the reliability methodology, including a parametric accelerated life test (ALT) plan, a load analysis, a tailored series of parametric ALTs with action plans, and an evaluation of the final designs to ensure the design requirements are satisfied. It covers both the quantitative and qualitative approaches of the reliability design forming in the development process of mechanical products, with a focus on parametric ALT and illustrated via case studies. This new reliability methodology – parametric ALT should help mechanical and civil engineers to uncover design parameters improving product design and avoiding recalls. Updated chapters cover product recalls and assessment of their significance, modern definitions in reliability engineering, parametric accelerated life testing in mechanical systems, and extended case studies. For this revised edition, one new chapter has been introduced to reflect recent developments in analysis of fluid motion and mechanical vibration. Other chapters are expanded and updated to improve the explanation of topics including structures and load analysis, failure mechanics, design and reliability testing, and mechanical system failure. The broad scope gives the reader an overview of the state-of-the-art in the reliability design of mechanical systems and an indication of future directions and applications. It will serve as a solid introduction to the field for advanced students, and a valuable reference for those working in the development of mechanical systems and related areas.