Author: Donghai Xu
Publisher: Springer Nature
ISBN: 9811655251
Category : Science
Languages : en
Pages : 248
Get Book Here
Book Description
This book aims to provide comprehensive and systematic introduction and summary of corrosion characteristics, mechanisms, and control methods of candidate alloys in sub- and supercritical water environment. First of all, corrosion types of candidate alloys and the effects of major alloying elements on corrosion resistance of potential alloys in sub- and supercritical water are compared and analyzed. At the same time, research status of candidate materials, and development and application trends of several corrosion-resistant alloys are summarized. Then, corrosion characteristics of Ni-Cr, Ni-Cr-Mo, Ni-Fe-Cr and Ni-Fe-Cr-Mo-Cu corrosion-resistant alloys, FeCrAl alloy, and Zircaloy are discussed in detail, including the corrosion rate, the structure and composition of oxide film, and the effects of various surface treatment processes, etc. More specifically, it also investigates corrosion behavior of Ni-based alloy, Fe-Ni-based, and stainless steels in supercritical water. The effects of aggressive species on the corrosion behavior of Ni-base alloys are also explored in supercritical water. Readers will further discover the total corrosion processes and mechanisms of typical candidate alloys in sub- and supercritical water environment. Finally, the work explores the corrosion control methods such as ceramic coatings and passivation processes in supercritical water oxidation and in subcritical water, respectively. Future challenges and development trends of corrosion research of candidate materials in sub- and supercritical water environments are covered at the end of this book. It offers valuable reference for theoretically guiding material selection and design and operating parameter optimization of key equipment in the sub- and supercritical water technologies. The book is written for senior undergraduates, graduate students, scholars, and researchers who are interested in corrosion behavior of candidate materials of supercritical water oxidation system, supercritical water gasification system, and nuclear reactor.
Author: Pascal Yvon
Publisher: Woodhead Publishing
ISBN: 0081009127
Category : Technology & Engineering
Languages : en
Pages : 686
Get Book Here
Book Description
Operating at a high level of fuel efficiency, safety, proliferation-resistance, sustainability and cost, generation IV nuclear reactors promise enhanced features to an energy resource which is already seen as an outstanding source of reliable base load power. The performance and reliability of materials when subjected to the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors are essential areas of study, as key considerations for the successful development of generation IV reactors are suitable structural materials for both in-core and out-of-core applications. Structural Materials for Generation IV Nuclear Reactors explores the current state-of-the art in these areas. Part One reviews the materials, requirements and challenges in generation IV systems. Part Two presents the core materials with chapters on irradiation resistant austenitic steels, ODS/FM steels and refractory metals amongst others. Part Three looks at out-of-core materials. Structural Materials for Generation IV Nuclear Reactors is an essential reference text for professional scientists, engineers and postgraduate researchers involved in the development of generation IV nuclear reactors. - Introduces the higher neutron doses and extremely corrosive higher temperature environments that will be found in generation IV nuclear reactors and implications for structural materials - Contains chapters on the key core and out-of-core materials, from steels to advanced micro-laminates - Written by an expert in that particular area
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 484
Get Book Here
Book Description
Author: Shuzhong Wang
Publisher: Springer Nature
ISBN: 9811393265
Category : Technology & Engineering
Languages : en
Pages : 360
Get Book Here
Book Description
This book systematically presents the technical aspects of supercritical water oxidation and supercritical water gasification for energy and environmental applications, which include reactor design, construction materials, corrosion, salt precipitation, etc. The book provides a comprehensive introduction to the properties of supercritical water, and the industrial applications, reaction mechanisms and reaction kinetics of supercritical water oxidation (SCWO) and supercritical water gasification (SCWG). The reactions occurring in supercritical water are complex, and studying their reaction mechanisms is of great importance for the development of supercritical water processing technologies. Accordingly, the book explains the oxidative mechanisms and kinetics of organic matter in supercritical water in detail. However, the harsh reaction conditions in supercritical water can easily create severe reactor corrosion and salt deposition problems. Therefore, the book also comprehensively reports on the mechanism analysis, state of research, and development trends regarding these two problems. Lastly, the book summarizes the development of supercritical water processing technologies, including studies on SCWO and SCWG, as well as near-zero-emission systems of pollutants based on SCWO technology. In short, the book provides a wealth of valuable information for all readers who are interested in using SCWO for organic waste treatment, and in using SCWG for hydrogen production with wet biomass.
Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 678
Get Book Here
Book Description
Author: Igor Pioro
Publisher: BoD – Books on Demand
ISBN: 183880708X
Category : Science
Languages : en
Pages : 224
Get Book Here
Book Description
Using SuperCritical Fluids (SCFs) in various processes is not new, because Mother Nature has been processing minerals in aqueous solutions at critical and supercritical pressures for billions of years. Somewhere in the 20th century, SCFs started to be used in various industries as working fluids, coolants, chemical agents, etc. Written by an international team of experts and complete with the latest research, development, and design, Advanced Supercritical Fluids Technologies is a unique technical book, completely dedicated to modern and advanced applications of supercritical fluids in various industries.Advanced Supercritical Fluids Technologies provides engineers and specialists in various industries dealing with SCFs as well as researchers, scientists, and students of the corresponding departments with a comprehensive overview of the current status, latest trends and developments of these technologies.Dr Igor Pioro is a professor at the University of Ontario Institute of Technology, Canada, and the Founding Editor of the ASME Journal of Nuclear Engineering and Radiation Science.
Author:
Publisher:
ISBN:
Category : Corrosion and anti-corrosives
Languages : en
Pages : 704
Get Book Here
Book Description
Author: National Research Council
Publisher: National Academies Press
ISBN: 0309187680
Category : Technology & Engineering
Languages : en
Pages : 192
Get Book Here
Book Description
The field of corrosion science and engineering is on the threshold of important advances. Advances in lifetime prediction and technological solutions, as enabled by the convergence of experimental and computational length and timescales and powerful new modeling techniques, are allowing the development of rigorous, mechanistically based models from observations and physical laws. Despite considerable progress in the integration of materials by design into engineering development of products, corrosion considerations are typically missing from such constructs. Similarly, condition monitoring and remaining life prediction (prognosis) do not at present incorporate corrosion factors. Great opportunities exist to use the framework of these materials design and engineering tools to stimulate corrosion research and development to achieve quantitative life prediction, to incorporate state-of-the-art sensing approaches into experimentation and materials architectures, and to introduce environmental degradation factors into these capabilities. Research Opportunities in Corrosion Science and Engineering identifies grand challenges for the corrosion research community, highlights research opportunities in corrosion science and engineering, and posits a national strategy for corrosion research. It is a logical and necessary complement to the recently published book, Assessment of Corrosion Education, which emphasized that technical education must be supported by academic, industrial, and government research. Although the present report focuses on the government role, this emphasis does not diminish the role of industry or academia.
Author: Thomas Schulenberg
Publisher: KIT Scientific Publishing
ISBN: 3866448171
Category : Technology & Engineering
Languages : en
Pages : 258
Get Book Here
Book Description
Results of the project "High Performance Light Water Reactor--Phase 2," carried out September 2006-February 2010 as part of the 6th European Framework Program.
Author: National Institute of Standards and Technology (U.S.)
Publisher:
ISBN:
Category : Government publications
Languages : en
Pages : 360
Get Book Here
Book Description
