Author: Nirajan Dhakal
Publisher: CRC Press
ISBN: 1351056085
Category : Science
Languages : en
Pages : 175
Book Description
Seawater desalination is a rapidly growing coastal industry that is increasingly threatened by algal blooms. Depending on the severity of algal blooms, desalination systems may be forced to shut down because of clogging and/or poor feed water quality. To maintain stable operation and provide good feed water quality to seawater reverse osmosis (SWRO) systems, ultrafiltration (UF) pre-treatment is proposed. This research focused on assessing the ability of UF and other pre-treatment technologies to reduce biofouling in SWRO systems. An improved method to measure bacterial regrowth potential (BRP) was developed and applied at laboratory, pilot and full scale to assess the ability of conventional UF (150 kDa) and tight UF (10 kDa) alone and in combination with a phosphate adsorbent to reduce regrowth potential and delay the onset of biofouling in SWRO. The improved bacterial regrowth potential method employs a natural consortium of marine bacteria as inoculum and flow cytometry. The limit of detection of the BRP method was lowered to 43,000 ± 12,000 cells/mL, which is equivalent to 9.3 ± 2.6 μg-Cglucose/L. The reduction in bacterial regrowth potential after tight UF (10 kDa) was 3 to 4 times higher than with conventional UF (150 kDa). It was further reduced after the application of a phosphate adsorbent, independent of pore size of the UF membrane. Pilot studies demonstrated that the application of tight UF (10 kDa) coupled with a phosphate adsorbent consistently lowered the bacterial regrowth potential and no feed channel pressure drop increase was observed in membrane fouling simulators (MFS) over a period of 21 days. The study also showed that non-backwashable fouling of UF membranes varied strongly with the type of algal species and the algal organic matter (AOM) they release. The presence of polysaccharide (stretching -OH) and sugar ester groups (stretching S=O) was the main cause of non-backwashable fouling. In conclusion, this study showed that an improved BRP method is suitable for the assessment of SWRO pre-treatment systems and it can be a useful tool to develop potential strategies to mitigate biofouling and improve the sustainability of SWRO systems.
Controlling Biofouling in Seawater Reverse Osmosis Membrane Systems
Author: Nirajan Dhakal
Publisher: CRC Press
ISBN: 1351056085
Category : Science
Languages : en
Pages : 175
Book Description
Seawater desalination is a rapidly growing coastal industry that is increasingly threatened by algal blooms. Depending on the severity of algal blooms, desalination systems may be forced to shut down because of clogging and/or poor feed water quality. To maintain stable operation and provide good feed water quality to seawater reverse osmosis (SWRO) systems, ultrafiltration (UF) pre-treatment is proposed. This research focused on assessing the ability of UF and other pre-treatment technologies to reduce biofouling in SWRO systems. An improved method to measure bacterial regrowth potential (BRP) was developed and applied at laboratory, pilot and full scale to assess the ability of conventional UF (150 kDa) and tight UF (10 kDa) alone and in combination with a phosphate adsorbent to reduce regrowth potential and delay the onset of biofouling in SWRO. The improved bacterial regrowth potential method employs a natural consortium of marine bacteria as inoculum and flow cytometry. The limit of detection of the BRP method was lowered to 43,000 ± 12,000 cells/mL, which is equivalent to 9.3 ± 2.6 μg-Cglucose/L. The reduction in bacterial regrowth potential after tight UF (10 kDa) was 3 to 4 times higher than with conventional UF (150 kDa). It was further reduced after the application of a phosphate adsorbent, independent of pore size of the UF membrane. Pilot studies demonstrated that the application of tight UF (10 kDa) coupled with a phosphate adsorbent consistently lowered the bacterial regrowth potential and no feed channel pressure drop increase was observed in membrane fouling simulators (MFS) over a period of 21 days. The study also showed that non-backwashable fouling of UF membranes varied strongly with the type of algal species and the algal organic matter (AOM) they release. The presence of polysaccharide (stretching -OH) and sugar ester groups (stretching S=O) was the main cause of non-backwashable fouling. In conclusion, this study showed that an improved BRP method is suitable for the assessment of SWRO pre-treatment systems and it can be a useful tool to develop potential strategies to mitigate biofouling and improve the sustainability of SWRO systems.
Publisher: CRC Press
ISBN: 1351056085
Category : Science
Languages : en
Pages : 175
Book Description
Seawater desalination is a rapidly growing coastal industry that is increasingly threatened by algal blooms. Depending on the severity of algal blooms, desalination systems may be forced to shut down because of clogging and/or poor feed water quality. To maintain stable operation and provide good feed water quality to seawater reverse osmosis (SWRO) systems, ultrafiltration (UF) pre-treatment is proposed. This research focused on assessing the ability of UF and other pre-treatment technologies to reduce biofouling in SWRO systems. An improved method to measure bacterial regrowth potential (BRP) was developed and applied at laboratory, pilot and full scale to assess the ability of conventional UF (150 kDa) and tight UF (10 kDa) alone and in combination with a phosphate adsorbent to reduce regrowth potential and delay the onset of biofouling in SWRO. The improved bacterial regrowth potential method employs a natural consortium of marine bacteria as inoculum and flow cytometry. The limit of detection of the BRP method was lowered to 43,000 ± 12,000 cells/mL, which is equivalent to 9.3 ± 2.6 μg-Cglucose/L. The reduction in bacterial regrowth potential after tight UF (10 kDa) was 3 to 4 times higher than with conventional UF (150 kDa). It was further reduced after the application of a phosphate adsorbent, independent of pore size of the UF membrane. Pilot studies demonstrated that the application of tight UF (10 kDa) coupled with a phosphate adsorbent consistently lowered the bacterial regrowth potential and no feed channel pressure drop increase was observed in membrane fouling simulators (MFS) over a period of 21 days. The study also showed that non-backwashable fouling of UF membranes varied strongly with the type of algal species and the algal organic matter (AOM) they release. The presence of polysaccharide (stretching -OH) and sugar ester groups (stretching S=O) was the main cause of non-backwashable fouling. In conclusion, this study showed that an improved BRP method is suitable for the assessment of SWRO pre-treatment systems and it can be a useful tool to develop potential strategies to mitigate biofouling and improve the sustainability of SWRO systems.
Controlling Biofouling in Seawater Reverse Osmosis Membrane Systems
Author: Nirajan Dhakal
Publisher: CRC Press
ISBN: 1351056093
Category : Science
Languages : en
Pages : 225
Book Description
Seawater desalination is a rapidly growing coastal industry that is increasingly threatened by algal blooms. Depending on the severity of algal blooms, desalination systems may be forced to shut down because of clogging and/or poor feed water quality. To maintain stable operation and provide good feed water quality to seawater reverse osmosis (SWRO) systems, ultrafiltration (UF) pre-treatment is proposed. This research focused on assessing the ability of UF and other pre-treatment technologies to reduce biofouling in SWRO systems. An improved method to measure bacterial regrowth potential (BRP) was developed and applied at laboratory, pilot and full scale to assess the ability of conventional UF (150 kDa) and tight UF (10 kDa) alone and in combination with a phosphate adsorbent to reduce regrowth potential and delay the onset of biofouling in SWRO. The improved bacterial regrowth potential method employs a natural consortium of marine bacteria as inoculum and flow cytometry. The limit of detection of the BRP method was lowered to 43,000 ± 12,000 cells/mL, which is equivalent to 9.3 ± 2.6 μg-Cglucose/L. The reduction in bacterial regrowth potential after tight UF (10 kDa) was 3 to 4 times higher than with conventional UF (150 kDa). It was further reduced after the application of a phosphate adsorbent, independent of pore size of the UF membrane. Pilot studies demonstrated that the application of tight UF (10 kDa) coupled with a phosphate adsorbent consistently lowered the bacterial regrowth potential and no feed channel pressure drop increase was observed in membrane fouling simulators (MFS) over a period of 21 days. The study also showed that non-backwashable fouling of UF membranes varied strongly with the type of algal species and the algal organic matter (AOM) they release. The presence of polysaccharide (stretching -OH) and sugar ester groups (stretching S=O) was the main cause of non-backwashable fouling. In conclusion, this study showed that an improved BRP method is suitable for the assessment of SWRO pre-treatment systems and it can be a useful tool to develop potential strategies to mitigate biofouling and improve the sustainability of SWRO systems.
Publisher: CRC Press
ISBN: 1351056093
Category : Science
Languages : en
Pages : 225
Book Description
Seawater desalination is a rapidly growing coastal industry that is increasingly threatened by algal blooms. Depending on the severity of algal blooms, desalination systems may be forced to shut down because of clogging and/or poor feed water quality. To maintain stable operation and provide good feed water quality to seawater reverse osmosis (SWRO) systems, ultrafiltration (UF) pre-treatment is proposed. This research focused on assessing the ability of UF and other pre-treatment technologies to reduce biofouling in SWRO systems. An improved method to measure bacterial regrowth potential (BRP) was developed and applied at laboratory, pilot and full scale to assess the ability of conventional UF (150 kDa) and tight UF (10 kDa) alone and in combination with a phosphate adsorbent to reduce regrowth potential and delay the onset of biofouling in SWRO. The improved bacterial regrowth potential method employs a natural consortium of marine bacteria as inoculum and flow cytometry. The limit of detection of the BRP method was lowered to 43,000 ± 12,000 cells/mL, which is equivalent to 9.3 ± 2.6 μg-Cglucose/L. The reduction in bacterial regrowth potential after tight UF (10 kDa) was 3 to 4 times higher than with conventional UF (150 kDa). It was further reduced after the application of a phosphate adsorbent, independent of pore size of the UF membrane. Pilot studies demonstrated that the application of tight UF (10 kDa) coupled with a phosphate adsorbent consistently lowered the bacterial regrowth potential and no feed channel pressure drop increase was observed in membrane fouling simulators (MFS) over a period of 21 days. The study also showed that non-backwashable fouling of UF membranes varied strongly with the type of algal species and the algal organic matter (AOM) they release. The presence of polysaccharide (stretching -OH) and sugar ester groups (stretching S=O) was the main cause of non-backwashable fouling. In conclusion, this study showed that an improved BRP method is suitable for the assessment of SWRO pre-treatment systems and it can be a useful tool to develop potential strategies to mitigate biofouling and improve the sustainability of SWRO systems.
Biofouling of Spiral Wound Membrane Systems
Author: Johannes Simon Vrouwenvelder
Publisher: IWA Publishing
ISBN: 1843393638
Category : Science
Languages : en
Pages : 355
Book Description
The study of membrane biofouling has increased strongly in the past four years, compared to the previous twenty two years, indicated by the more than doubling of the number of scientific papers. However, no single source gives an updated overview of biofouling. Biofouling of Spiral Wound Membrane Systems gives a complete and comprehensive overview of all aspects of biofouling, bridging the gap between microbiology, hydraulics and membrane technology. High quality drinking water can be produced with membrane filtration processes like reverse osmosis (RO) and nanofiltration (NF). As the global demand for fresh clean water is increasing, these membrane technologies are increasingly important. One of the most serious problems in RO/NF applications is biofouling – excessive growth of biomass – affecting the performance of the RO/NF systems. This can be due to the increase in pressure drop across membrane elements (feed-concentrate channel), the decrease in membrane permeability or the increase in salt passage. These phenomena result in the need to increase the feed pressure to maintain constant production and to clean the membrane elements chemically. Biofouling of Spiral Wound Membrane Systems relates biomass accumulation in spiral wound RO and NF membrane elements with membrane performance and hydrodynamics and determines parameters influencing biofouling. It focuses on the development of biomass in the feed-concentrate (feed-spacer) channel and its effect on pressure drop and flow distribution. It can be used to develop an integral strategy to control biofouling in spiral wound membrane systems. Most past and present methods to control biofouling have not been very successful. An overview of several potential complementary approaches to solve biofouling is given and an integrated approach for biofouling control is proposed.
Publisher: IWA Publishing
ISBN: 1843393638
Category : Science
Languages : en
Pages : 355
Book Description
The study of membrane biofouling has increased strongly in the past four years, compared to the previous twenty two years, indicated by the more than doubling of the number of scientific papers. However, no single source gives an updated overview of biofouling. Biofouling of Spiral Wound Membrane Systems gives a complete and comprehensive overview of all aspects of biofouling, bridging the gap between microbiology, hydraulics and membrane technology. High quality drinking water can be produced with membrane filtration processes like reverse osmosis (RO) and nanofiltration (NF). As the global demand for fresh clean water is increasing, these membrane technologies are increasingly important. One of the most serious problems in RO/NF applications is biofouling – excessive growth of biomass – affecting the performance of the RO/NF systems. This can be due to the increase in pressure drop across membrane elements (feed-concentrate channel), the decrease in membrane permeability or the increase in salt passage. These phenomena result in the need to increase the feed pressure to maintain constant production and to clean the membrane elements chemically. Biofouling of Spiral Wound Membrane Systems relates biomass accumulation in spiral wound RO and NF membrane elements with membrane performance and hydrodynamics and determines parameters influencing biofouling. It focuses on the development of biomass in the feed-concentrate (feed-spacer) channel and its effect on pressure drop and flow distribution. It can be used to develop an integral strategy to control biofouling in spiral wound membrane systems. Most past and present methods to control biofouling have not been very successful. An overview of several potential complementary approaches to solve biofouling is given and an integrated approach for biofouling control is proposed.
Alternative Disinfectants and Oxidants Guidance Manual
Author:
Publisher:
ISBN:
Category : Disinfection and disinfectants
Languages : en
Pages : 340
Book Description
Publisher:
ISBN:
Category : Disinfection and disinfectants
Languages : en
Pages : 340
Book Description
Membranes for Water Treatment
Author: Klaus-Viktor Peinemann
Publisher: John Wiley & Sons
ISBN: 9783527631414
Category : Technology & Engineering
Languages : en
Pages : 251
Book Description
This ready reference on Membrane Technologies for Water Treatment, is an invaluable source detailing sustainable, emerging processes, to provide clean, energy saving and cost effective alternatives to conventional processes. The editors are internationally renowned leaders in the field, who have put together a first-class team of authors from academia and industry to present a highly approach to the subject. The book is an instrumental tool for Process Engineers, Chemical Engineers, Process Control Technicians, Water Chemists, Environmental Chemists, Materials Scientists and Patent Lawyers.
Publisher: John Wiley & Sons
ISBN: 9783527631414
Category : Technology & Engineering
Languages : en
Pages : 251
Book Description
This ready reference on Membrane Technologies for Water Treatment, is an invaluable source detailing sustainable, emerging processes, to provide clean, energy saving and cost effective alternatives to conventional processes. The editors are internationally renowned leaders in the field, who have put together a first-class team of authors from academia and industry to present a highly approach to the subject. The book is an instrumental tool for Process Engineers, Chemical Engineers, Process Control Technicians, Water Chemists, Environmental Chemists, Materials Scientists and Patent Lawyers.
Seawater Pretreatment
Author: Nikolay Voutchkov
Publisher:
ISBN: 9789744017956
Category : Membranes (Technology).
Languages : en
Pages : 173
Book Description
Publisher:
ISBN: 9789744017956
Category : Membranes (Technology).
Languages : en
Pages : 173
Book Description
Pretreatment for Reverse Osmosis Desalination
Author: Nikolay Voutchkov
Publisher: Elsevier
ISBN: 0128099453
Category : Science
Languages : en
Pages : 308
Book Description
Pretreatment for Reverse Osmosis Desalination is a comprehensive reference on all existing and emerging seawater pretreatment technologies used for desalination. The book focuses on reverse osmosis membrane desalination, which at present is the most widely applied technology for the production of fresh drinking water from highly saline water sources (brackish water and seawater). Each chapter contains examples illustrating various pretreatment technologies and their practical implementation. - Provides in-depth overview of the key theoretical concepts associated with desalination pre-treatment - Gives insight into the latest trends in membrane separation technology - Incorporates analytical methods and guidelines for monitoring pretreatment systems
Publisher: Elsevier
ISBN: 0128099453
Category : Science
Languages : en
Pages : 308
Book Description
Pretreatment for Reverse Osmosis Desalination is a comprehensive reference on all existing and emerging seawater pretreatment technologies used for desalination. The book focuses on reverse osmosis membrane desalination, which at present is the most widely applied technology for the production of fresh drinking water from highly saline water sources (brackish water and seawater). Each chapter contains examples illustrating various pretreatment technologies and their practical implementation. - Provides in-depth overview of the key theoretical concepts associated with desalination pre-treatment - Gives insight into the latest trends in membrane separation technology - Incorporates analytical methods and guidelines for monitoring pretreatment systems
Biofilm Highlights
Author: Hans-Curt Flemming
Publisher: Springer Science & Business Media
ISBN: 3642199402
Category : Science
Languages : en
Pages : 252
Book Description
Living in biofilms is the common way of life of microorganisms, transiently immobilized in their matrix of extracellular polymeric substances (EPS), interacting in many ways and using the matrix as an external digestion and protection system. This is how they have organized their life in the environment, in the medical context and in technical systems – and has helped make them the oldest, most successful and ubiquitous form of life. In this book, hot spots in current biofilm research are presented in critical and sometimes provocative chapters. This serves a twofold purpose: to provide an overview and to inspire further discussions. Above all, the book seeks to stimulate lateral thinking.
Publisher: Springer Science & Business Media
ISBN: 3642199402
Category : Science
Languages : en
Pages : 252
Book Description
Living in biofilms is the common way of life of microorganisms, transiently immobilized in their matrix of extracellular polymeric substances (EPS), interacting in many ways and using the matrix as an external digestion and protection system. This is how they have organized their life in the environment, in the medical context and in technical systems – and has helped make them the oldest, most successful and ubiquitous form of life. In this book, hot spots in current biofilm research are presented in critical and sometimes provocative chapters. This serves a twofold purpose: to provide an overview and to inspire further discussions. Above all, the book seeks to stimulate lateral thinking.
Osmotically Driven Membrane Processes
Author: Hongbo Du
Publisher: BoD – Books on Demand
ISBN: 9535139215
Category : Technology & Engineering
Languages : en
Pages : 283
Book Description
Osmotically driven membrane processes (ODMPs) including forward osmosis (FO) and pressure-retarded osmosis (PRO) have attracted increasing attention in fields such as water treatment, desalination, power generation, and life science. In contrast to pressure-driven membrane processes, e.g., reverse osmosis, which typically employs applied high pressure as driving force, ODMPs take advantages of naturally generated osmotic pressure as the sole source of driving force. In light of this, ODMPs possess many advantages over pressure-driven membrane processes. The advantages include low energy consumption, ease of equipment maintenance, low capital investment, high salt rejection, and high water flux. In the past decade, over 300 academic papers on ODMPs have been published in a variety of application fields. The number of such publications is still rapidly growing. The ODMPs' approach, fabrications, recent development and applications in wastewater treatment, power generation, seawater desalination, and gas absorption are presented in this book.
Publisher: BoD – Books on Demand
ISBN: 9535139215
Category : Technology & Engineering
Languages : en
Pages : 283
Book Description
Osmotically driven membrane processes (ODMPs) including forward osmosis (FO) and pressure-retarded osmosis (PRO) have attracted increasing attention in fields such as water treatment, desalination, power generation, and life science. In contrast to pressure-driven membrane processes, e.g., reverse osmosis, which typically employs applied high pressure as driving force, ODMPs take advantages of naturally generated osmotic pressure as the sole source of driving force. In light of this, ODMPs possess many advantages over pressure-driven membrane processes. The advantages include low energy consumption, ease of equipment maintenance, low capital investment, high salt rejection, and high water flux. In the past decade, over 300 academic papers on ODMPs have been published in a variety of application fields. The number of such publications is still rapidly growing. The ODMPs' approach, fabrications, recent development and applications in wastewater treatment, power generation, seawater desalination, and gas absorption are presented in this book.
Microfluidics and Nanofluidics
Author: Mohsen Sheikholeslami Kandelousi
Publisher: BoD – Books on Demand
ISBN: 1789235405
Category : Science
Languages : en
Pages : 320
Book Description
In the present book, various applications of microfluidics and nanofluidics are introduced. Microfluidics and nanofluidics span a broad array of disciplines including mechanical, materials, and electrical engineering, surface science, chemistry, physics and biology. Also, this book deals with transport and interactions of colloidal particles and biomolecules in microchannels, which have great importance to many microfluidic applications, such as drug delivery in life science, microchannel heat exchangers in electronic cooling, and food processing industry. Furthermore, this book focuses on a detailed description of the thermal transport behavior, challenges and implications that involve the development and use of HTFs under the influence of atomistic-scale structures and industrial applications.
Publisher: BoD – Books on Demand
ISBN: 1789235405
Category : Science
Languages : en
Pages : 320
Book Description
In the present book, various applications of microfluidics and nanofluidics are introduced. Microfluidics and nanofluidics span a broad array of disciplines including mechanical, materials, and electrical engineering, surface science, chemistry, physics and biology. Also, this book deals with transport and interactions of colloidal particles and biomolecules in microchannels, which have great importance to many microfluidic applications, such as drug delivery in life science, microchannel heat exchangers in electronic cooling, and food processing industry. Furthermore, this book focuses on a detailed description of the thermal transport behavior, challenges and implications that involve the development and use of HTFs under the influence of atomistic-scale structures and industrial applications.