Author: Russell H. Taylor
Publisher: MIT Press
ISBN: 9780262200974
Category : Medical
Languages : en
Pages : 790
Book Description
In Computer-Integrated Surgery leading researchers and clinical practitioners describe the exciting new partnership that is being forged between surgeons and machines such as computers and robots, enabling them to perform certain skilled tasks better than either can do alone.The 19 chapters in part I, Technology, explore the components -- registration, basic tools for surgical planning, human-machine interfaces, robotic manipulators, safety -- that are the basis of computer-integrated surgery. These chapters provide essential background material needed to get up to speed on current work as well as a ready reference for those who are already active in the field.The 39 chapters in part II, Applications, cover eight clinical areas -- neurosurgery, orthopedics, eye surgery, dentistry, minimal access surgery, ENT surgery, craniofacial surgery, and radiotherapy -- with a concluding chapter on the high-tech operating room. Each section contains a brief introduction as well as at least one "requirements and opportunities" chapter written by a leading clinician in the area under discussion.
Computer-integrated Surgery
Author: Russell H. Taylor
Publisher: MIT Press
ISBN: 9780262200974
Category : Medical
Languages : en
Pages : 790
Book Description
In Computer-Integrated Surgery leading researchers and clinical practitioners describe the exciting new partnership that is being forged between surgeons and machines such as computers and robots, enabling them to perform certain skilled tasks better than either can do alone.The 19 chapters in part I, Technology, explore the components -- registration, basic tools for surgical planning, human-machine interfaces, robotic manipulators, safety -- that are the basis of computer-integrated surgery. These chapters provide essential background material needed to get up to speed on current work as well as a ready reference for those who are already active in the field.The 39 chapters in part II, Applications, cover eight clinical areas -- neurosurgery, orthopedics, eye surgery, dentistry, minimal access surgery, ENT surgery, craniofacial surgery, and radiotherapy -- with a concluding chapter on the high-tech operating room. Each section contains a brief introduction as well as at least one "requirements and opportunities" chapter written by a leading clinician in the area under discussion.
Publisher: MIT Press
ISBN: 9780262200974
Category : Medical
Languages : en
Pages : 790
Book Description
In Computer-Integrated Surgery leading researchers and clinical practitioners describe the exciting new partnership that is being forged between surgeons and machines such as computers and robots, enabling them to perform certain skilled tasks better than either can do alone.The 19 chapters in part I, Technology, explore the components -- registration, basic tools for surgical planning, human-machine interfaces, robotic manipulators, safety -- that are the basis of computer-integrated surgery. These chapters provide essential background material needed to get up to speed on current work as well as a ready reference for those who are already active in the field.The 39 chapters in part II, Applications, cover eight clinical areas -- neurosurgery, orthopedics, eye surgery, dentistry, minimal access surgery, ENT surgery, craniofacial surgery, and radiotherapy -- with a concluding chapter on the high-tech operating room. Each section contains a brief introduction as well as at least one "requirements and opportunities" chapter written by a leading clinician in the area under discussion.
Computer and Robotic Assisted Hip and Knee Surgery
Author: Anthony DiGioia
Publisher: Oxford University Press
ISBN: 9780198509431
Category : Medical
Languages : en
Pages : 366
Book Description
The techniques of computer and robotic assisted surgery are making a major impact on the practice of orthopaedics. This book provides a complete overview of the technical and clinical aspects of computer-assisted surgery with extensive coverage of the use of robotic and navigation technologies in the surgical setting. The first part of the book presents the clinical problems and describes the basic technological components. The second part of the book describes specific applications in hip and knee reconstructive surgery.
Publisher: Oxford University Press
ISBN: 9780198509431
Category : Medical
Languages : en
Pages : 366
Book Description
The techniques of computer and robotic assisted surgery are making a major impact on the practice of orthopaedics. This book provides a complete overview of the technical and clinical aspects of computer-assisted surgery with extensive coverage of the use of robotic and navigation technologies in the surgical setting. The first part of the book presents the clinical problems and describes the basic technological components. The second part of the book describes specific applications in hip and knee reconstructive surgery.
Handbook of Robotic and Image-Guided Surgery
Author: Mohammad Hossein Abedin Nasab
Publisher: Elsevier
ISBN: 0128142464
Category : Science
Languages : en
Pages : 753
Book Description
Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. - A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field - A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries - Chapters are contributed by worldwide experts from both engineering and surgical backgrounds
Publisher: Elsevier
ISBN: 0128142464
Category : Science
Languages : en
Pages : 753
Book Description
Handbook of Robotic and Image-Guided Surgery provides state-of-the-art systems and methods for robotic and computer-assisted surgeries. In this masterpiece, contributions of 169 researchers from 19 countries have been gathered to provide 38 chapters. This handbook is 744 pages, includes 659 figures and 61 videos. It also provides basic medical knowledge for engineers and basic engineering principles for surgeons. A key strength of this text is the fusion of engineering, radiology, and surgical principles into one book. - A thorough and in-depth handbook on surgical robotics and image-guided surgery which includes both fundamentals and advances in the field - A comprehensive reference on robot-assisted laparoscopic, orthopedic, and head-and-neck surgeries - Chapters are contributed by worldwide experts from both engineering and surgical backgrounds
Computer Vision, Virtual Reality and Robotics in Medicine
Author: Nicholas Ayache
Publisher: Springer
ISBN: 354049197X
Category : Medical
Languages : en
Pages : 564
Book Description
This book contains the written contributions to the program of the First In ternational Conference on Computer Vision, Virtual Reality, and Robotics in Medicine (CVRMed'95) held in Nice during the period April 3-6, 1995. The articles are regrouped into a number of thematic sessions which cover the three major topics of the field: medical image understanding, registration problems in medicine, and therapy planning, simulation and control. The objective of the conference is not only to present the most innovative and promising research work but also to highlight research trends and to foster dialogues and debates among participants. This event was decided after a preliminary successful symposium organized in Stanford in March 1994 by E. Grimson (MIT), T. Kanade (CMU), R. Kikinis and W. Wells (Chair) (both at Harvard Medical School and Brigham and Women's Hospital), and myself (INRIA). We received 92 submitted full papers, and each one was evaluated by at least three members of the Program Committee, with the help of auxiliary reviewers. Based on these evaluations, a representative subset of the Program Committee met to select 19 long papers, 29 regular papers, and 27 posters. The geographical repartition of the contributions is the following: 24 from European countries (other than France), 23 contributions from France, 20 from Northern America (USA and Canada), and 8 from Asia (Japan and Singapore).
Publisher: Springer
ISBN: 354049197X
Category : Medical
Languages : en
Pages : 564
Book Description
This book contains the written contributions to the program of the First In ternational Conference on Computer Vision, Virtual Reality, and Robotics in Medicine (CVRMed'95) held in Nice during the period April 3-6, 1995. The articles are regrouped into a number of thematic sessions which cover the three major topics of the field: medical image understanding, registration problems in medicine, and therapy planning, simulation and control. The objective of the conference is not only to present the most innovative and promising research work but also to highlight research trends and to foster dialogues and debates among participants. This event was decided after a preliminary successful symposium organized in Stanford in March 1994 by E. Grimson (MIT), T. Kanade (CMU), R. Kikinis and W. Wells (Chair) (both at Harvard Medical School and Brigham and Women's Hospital), and myself (INRIA). We received 92 submitted full papers, and each one was evaluated by at least three members of the Program Committee, with the help of auxiliary reviewers. Based on these evaluations, a representative subset of the Program Committee met to select 19 long papers, 29 regular papers, and 27 posters. The geographical repartition of the contributions is the following: 24 from European countries (other than France), 23 contributions from France, 20 from Northern America (USA and Canada), and 8 from Asia (Japan and Singapore).
Medical Image Computing and Computer-Assisted Intervention - MICCAI 2008
Author: Dimitris Metaxas
Publisher: Springer
ISBN: 354085990X
Category : Computers
Languages : en
Pages : 1161
Book Description
The 11th International Conference on Medical Imaging and Computer Assisted Intervention, MICCAI 2008, was held at the Helen and Martin Kimmel Center of New York University, New York City, USA on September 6–10, 2008. MICCAI is the premier international conference in this domain, with - depth papers on the multidisciplinary ?elds of biomedical image computing and analysis, computer assisted intervention and medical robotics. The conference brings together biological scientists, clinicians, computer scientists, engineers, mathematicians, physicists and other interested researchers and o?ers them a forum to exchange ideas in these exciting and rapidly growing ?elds. The conference is both very selective and very attractive: this year we - ceived a record number of 700 submissions from 34 countries and 6 continents, fromwhich258papers were selectedfor publication,whichcorrespondsto a s- cess rate of approximately 36%. Some interesting facts about the distribution of submitted and accepted papers are shown graphically at the end of this preface. The paper selection process this year was based on the following procedure, which included the introduction of several novelties over previous years. 1. A ProgramCommittee (PC) of 49 members was recruited by the Program Chairs,to getthenecessarybody ofexpertiseandgeographicalcoverage.All PC members agreed in advance to participate in the ?nal paper selection process. 2. Key words grouped in 7 categories were used to describe the content of the submissions and the expertise of the reviewers.
Publisher: Springer
ISBN: 354085990X
Category : Computers
Languages : en
Pages : 1161
Book Description
The 11th International Conference on Medical Imaging and Computer Assisted Intervention, MICCAI 2008, was held at the Helen and Martin Kimmel Center of New York University, New York City, USA on September 6–10, 2008. MICCAI is the premier international conference in this domain, with - depth papers on the multidisciplinary ?elds of biomedical image computing and analysis, computer assisted intervention and medical robotics. The conference brings together biological scientists, clinicians, computer scientists, engineers, mathematicians, physicists and other interested researchers and o?ers them a forum to exchange ideas in these exciting and rapidly growing ?elds. The conference is both very selective and very attractive: this year we - ceived a record number of 700 submissions from 34 countries and 6 continents, fromwhich258papers were selectedfor publication,whichcorrespondsto a s- cess rate of approximately 36%. Some interesting facts about the distribution of submitted and accepted papers are shown graphically at the end of this preface. The paper selection process this year was based on the following procedure, which included the introduction of several novelties over previous years. 1. A ProgramCommittee (PC) of 49 members was recruited by the Program Chairs,to getthenecessarybody ofexpertiseandgeographicalcoverage.All PC members agreed in advance to participate in the ?nal paper selection process. 2. Key words grouped in 7 categories were used to describe the content of the submissions and the expertise of the reviewers.
Computer Aided Surgery
Author: Takeyoshi Dohi
Publisher: Springer Science & Business Media
ISBN: 4431540946
Category : Computers
Languages : en
Pages : 166
Book Description
The aim of computer-aided surgery (CAS) is to advance the utilization of computers in the development of new technologies for medical services. The Asian Conference on Computer Aided Surgery (ACCAS) series provides a forum for academic researchers, clinical scientists, surgeons, and industrial partners to exchange new ideas, techniques, and the latest developments in the field. The ACCAS brings together researchers from all fields related to medical activity visualization, simulation and modeling, virtual reality for CAS, image-guided diagnosis and therapies, CAS for minimally invasive intervention, medical robotics and instrumentation, surgical navigation, clinical application of CAS, telemedicine and telesurgery, and CAS education. The ACCAS is also interested in promoting collaboration among people from different disciplines and different countries in Asia and the world. This volume helps to achieve that goal and is a valuable resource for researchers and clinicians in the field.
Publisher: Springer Science & Business Media
ISBN: 4431540946
Category : Computers
Languages : en
Pages : 166
Book Description
The aim of computer-aided surgery (CAS) is to advance the utilization of computers in the development of new technologies for medical services. The Asian Conference on Computer Aided Surgery (ACCAS) series provides a forum for academic researchers, clinical scientists, surgeons, and industrial partners to exchange new ideas, techniques, and the latest developments in the field. The ACCAS brings together researchers from all fields related to medical activity visualization, simulation and modeling, virtual reality for CAS, image-guided diagnosis and therapies, CAS for minimally invasive intervention, medical robotics and instrumentation, surgical navigation, clinical application of CAS, telemedicine and telesurgery, and CAS education. The ACCAS is also interested in promoting collaboration among people from different disciplines and different countries in Asia and the world. This volume helps to achieve that goal and is a valuable resource for researchers and clinicians in the field.
3D Imaging in Medicine
Author: Karl H. Höhne
Publisher: Springer Science & Business Media
ISBN: 3642842119
Category : Computers
Languages : en
Pages : 449
Book Description
The visualization of human anatomy for diagnostic, therapeutic, and educational pur poses has long been a challenge for scientists and artists. In vivo medical imaging could not be introduced until the discovery of X-rays by Wilhelm Conrad ROntgen in 1895. With the early medical imaging techniques which are still in use today, the three-dimensional reality of the human body can only be visualized in two-dimensional projections or cross-sections. Recently, biomedical engineering and computer science have begun to offer the potential of producing natural three-dimensional views of the human anatomy of living subjects. For a broad application of such technology, many scientific and engineering problems still have to be solved. In order to stimulate progress, the NATO Advanced Research Workshop in Travemiinde, West Germany, from June 25 to 29 was organized. It brought together approximately 50 experts in 3D-medical imaging from allover the world. Among the list of topics image acquisition was addressed first, since its quality decisively influences the quality of the 3D-images. For 3D-image generation - in distinction to 2D imaging - a decision has to be made as to which objects contained in the data set are to be visualized. Therefore special emphasis was laid on methods of object definition. For the final visualization of the segmented objects a large variety of visualization algorithms have been proposed in the past. The meeting assessed these techniques.
Publisher: Springer Science & Business Media
ISBN: 3642842119
Category : Computers
Languages : en
Pages : 449
Book Description
The visualization of human anatomy for diagnostic, therapeutic, and educational pur poses has long been a challenge for scientists and artists. In vivo medical imaging could not be introduced until the discovery of X-rays by Wilhelm Conrad ROntgen in 1895. With the early medical imaging techniques which are still in use today, the three-dimensional reality of the human body can only be visualized in two-dimensional projections or cross-sections. Recently, biomedical engineering and computer science have begun to offer the potential of producing natural three-dimensional views of the human anatomy of living subjects. For a broad application of such technology, many scientific and engineering problems still have to be solved. In order to stimulate progress, the NATO Advanced Research Workshop in Travemiinde, West Germany, from June 25 to 29 was organized. It brought together approximately 50 experts in 3D-medical imaging from allover the world. Among the list of topics image acquisition was addressed first, since its quality decisively influences the quality of the 3D-images. For 3D-image generation - in distinction to 2D imaging - a decision has to be made as to which objects contained in the data set are to be visualized. Therefore special emphasis was laid on methods of object definition. For the final visualization of the segmented objects a large variety of visualization algorithms have been proposed in the past. The meeting assessed these techniques.
Artificial Intelligence in Medicine
Author: Elpida Keravnou
Publisher: Springer Science & Business Media
ISBN: 9783540627098
Category : Computers
Languages : en
Pages : 550
Book Description
Content Description #Includes bibliographical references and index.
Publisher: Springer Science & Business Media
ISBN: 9783540627098
Category : Computers
Languages : en
Pages : 550
Book Description
Content Description #Includes bibliographical references and index.
International Symposium on History of Machines and Mechanisms
Author: Hong-Sen Yan
Publisher: Springer Science & Business Media
ISBN: 140209485X
Category : Science
Languages : en
Pages : 386
Book Description
The International Symposium on the History of Machines and Mechanisms is the main activity of the Permanent Commission (PC) for the History of Mechanism and Machine Science (HMM) of the International Federation for the Promotion of Mechanism and Machine Science (IFToMM). The first symposium, HMM2000, was initiated by Dr. Marco Ceccarelli and was held at the University of Cassino (Cassino, Italy) on May 11–13, 2000. The second symposium, HMM2004, was chaired by Dr. Marco Ceccarelli and held at the same venue on May 12–15, 2004. The third symposium, HMM2008, was chaired by Dr. Hong-Sen Yan and held at the National Cheng Kung University (Tainan, Taiwan) on November 11–14, 2008. The mission of IFToMM is to promote research and development in the field of machines and mechanisms by theoretical and experimental methods, along with their practical applications. The aim of HMM2008 is to establish an international forum for presenting and discussing historical developments in the field of Mechanism and Machine Science (MMS). The subject area covers all aspects of the development of HMM, such as machine, mechanism, kinematics, design method, etc., that are related to people, events, objects, anything that assisted in the development of the HMM, and presented in the forms of reasoning and ar- ments, demonstration and identification, and description and evaluation.
Publisher: Springer Science & Business Media
ISBN: 140209485X
Category : Science
Languages : en
Pages : 386
Book Description
The International Symposium on the History of Machines and Mechanisms is the main activity of the Permanent Commission (PC) for the History of Mechanism and Machine Science (HMM) of the International Federation for the Promotion of Mechanism and Machine Science (IFToMM). The first symposium, HMM2000, was initiated by Dr. Marco Ceccarelli and was held at the University of Cassino (Cassino, Italy) on May 11–13, 2000. The second symposium, HMM2004, was chaired by Dr. Marco Ceccarelli and held at the same venue on May 12–15, 2004. The third symposium, HMM2008, was chaired by Dr. Hong-Sen Yan and held at the National Cheng Kung University (Tainan, Taiwan) on November 11–14, 2008. The mission of IFToMM is to promote research and development in the field of machines and mechanisms by theoretical and experimental methods, along with their practical applications. The aim of HMM2008 is to establish an international forum for presenting and discussing historical developments in the field of Mechanism and Machine Science (MMS). The subject area covers all aspects of the development of HMM, such as machine, mechanism, kinematics, design method, etc., that are related to people, events, objects, anything that assisted in the development of the HMM, and presented in the forms of reasoning and ar- ments, demonstration and identification, and description and evaluation.
Cybersurgery
Author: Richard M. Satava
Publisher: Wiley-Liss
ISBN:
Category : Medical
Languages : en
Pages : 244
Book Description
Developments in minimal access surgery are increasingly being driven by advances in technology. The operating room of the future will be a sophisticated mix of stereo imaging systems, microbots, robotic manipulators, virtual reality/telepresence workstations, and computer integrated surgery. This volume explores the emerging technologies that are revolutionizing modern surgical practice.
Publisher: Wiley-Liss
ISBN:
Category : Medical
Languages : en
Pages : 244
Book Description
Developments in minimal access surgery are increasingly being driven by advances in technology. The operating room of the future will be a sophisticated mix of stereo imaging systems, microbots, robotic manipulators, virtual reality/telepresence workstations, and computer integrated surgery. This volume explores the emerging technologies that are revolutionizing modern surgical practice.