Author: Morin Dehan
Publisher: Presses univ. de Louvain
ISBN: 9782930344393
Category : Science
Languages : en
Pages : 238
Get Book Here
Book Description
The boom of mobile communications leads to an increasing request of low cost and low power mixed mode integrated circuits. Maturity of SOI technology, and recent progresses of MOSFET's microwave performances, explain the success of silicon as compared to III-V technologies for low-cost multigigahertz analog applications. The design of efficient circuits requires accurate, wide-band models for both active and passive elements. Within this frame, passive and active components fabricated in SOI technologies have been studied. Various topologies of integrated transmission lines, like Coplanar Waveguides or thin film microstrip lines, have been analyzed. Also, a new physical model of integrated inductors has been developed. This model, based on a coupled line analysis of square spiral inductors, is scalable and independent of the technology used. Inductors with various spacing between strips, conductor widths, or number of turns can be simulated on different multi-layered substrates. Each layer that composes the substrate is defined using its electrical properties (permittivity, permeability, conductivity). The performances of integrated sub-micron MOSFETs are analyzed. New alternative structures of transistor (the Graded Channel MOSFET and the Dynamic Threshold MOSFET) are proposed to increase the performances of a CMOS technology for for analog, low power, low voltage, and microwave applications. They are studied from Low to High frequency. The graded channel MOSFET is an asymmetric doped channel MOSFET's which bring solutions for the problems of premature drain break-down, hot carrier effects, and threshold voltage (Vth) roll-off issues in deep submicrometer devices. The GCMOS processing is fully compatible with the conventional SOI MOSFET process flow, with no additional steps needed. The dynamic threshold voltage MOS is a MOS transistor for which the gate and the body channel are tied together. All DTMOS electrical properties can be deduced from standard MOS theory by introducing Vbs = Vgs. The main advantage of DTMOS over conventional MOS is its higher drive current at low bias conditions. To keep the body to source current as low as possible, the body bias voltage must be kept lower than 0.7 V. It seems obvious that the DTMOS transistor is an attractive component for low voltage applications.
Author: M. Jamal Deen
Publisher: World Scientific
ISBN: 9789810249052
Category : Science
Languages : en
Pages : 426
Get Book Here
Book Description
CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 æm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.
Author: M Jamal Deen
Publisher: World Scientific
ISBN: 9814488925
Category : Technology & Engineering
Languages : en
Pages : 422
Get Book Here
Book Description
CMOS technology has now reached a state of evolution, in terms of both frequency and noise, where it is becoming a serious contender for radio frequency (RF) applications in the GHz range. Cutoff frequencies of about 50 GHz have been reported for 0.18 µm CMOS technology, and are expected to reach about 100 GHz when the feature size shrinks to 100 nm within a few years. This translates into CMOS circuit operating frequencies well into the GHz range, which covers the frequency range of many of today's popular wireless products, such as cell phones, GPS (Global Positioning System) and Bluetooth. Of course, the great interest in RF CMOS comes from the obvious advantages of CMOS technology in terms of production cost, high-level integration, and the ability to combine digital, analog and RF circuits on the same chip. This book discusses many of the challenges facing the CMOS RF circuit designer in terms of device modeling and characterization, which are crucial issues in circuit simulation and design.
Author: Wladyslaw Grabinski
Publisher: Springer Science & Business Media
ISBN: 1402045565
Category : Technology & Engineering
Languages : en
Pages : 298
Get Book Here
Book Description
The editors and authors present a wealth of knowledge regarding the most relevant aspects in the field of MOS transistor modeling. The variety of subjects and the high quality of content of this volume make it a reference document for researchers and users of MOSFET devices and models. The book can be recommended to everyone who is involved in compact model developments, numerical TCAD modeling, parameter extraction, space-level simulation or model standardization. The book will appeal equally to PhD students who want to understand the ins and outs of MOSFETs as well as to modeling designers working in the analog and high-frequency areas.
Author: Snezana Jenei
Publisher:
ISBN:
Category : Bipolar integrated circuits
Languages : en
Pages : 256
Get Book Here
Book Description
Author: Badih El-Kareh
Publisher: Springer
ISBN: 3030150852
Category : Technology & Engineering
Languages : en
Pages : 683
Get Book Here
Book Description
This book covers modern analog components, their characteristics, and interactions with process parameters. It serves as a comprehensive guide, addressing both the theoretical and practical aspects of modern silicon devices and the relationship between their electrical properties and processing conditions. Based on the authors’ extensive experience in the development of analog devices, this book is intended for engineers and scientists in semiconductor research, development and manufacturing. The problems at the end of each chapter and the numerous charts, figures and tables also make it appropriate for use as a text in graduate and advanced undergraduate courses in electrical engineering and materials science. Enables engineers to understand analog device physics, and discusses important relations between process integration, device design, component characteristics, and reliability; Describes in step-by-step fashion the components that are used in analog designs, the particular characteristics of analog components, while comparing them to digital applications; Explains the second-order effects in analog devices, and trade-offs between these effects when designing components and developing an integrated process for their manufacturing.
Author: Chenming Hu
Publisher: Woodhead Publishing
ISBN: 0081024029
Category : Technology & Engineering
Languages : en
Pages : 260
Get Book Here
Book Description
Industry Standard FDSOI Compact Model BSIM-IMG for IC Design helps readers develop an understanding of a FDSOI device and its simulation model. It covers the physics and operation of the FDSOI device, explaining not only how FDSOI enables further scaling, but also how it offers unique possibilities in circuits. Following chapters cover the industry standard compact model BSIM-IMG for FDSOI devices. The book addresses core surface-potential calculations and the plethora of real devices and potential effects. Written by the original developers of the industrial standard model, this book is an excellent reference for the new BSIM-IMG compact model for emerging FDSOI technology. The authors include chapters on step-by-step parameters extraction procedure for BSIM-IMG model and rigorous industry grade tests that the BSIM-IMG model has undergone. There is also a chapter on analog and RF circuit design in FDSOI technology using the BSIM-IMG model. - Provides a detailed discussion of the BSIM-IMG model and the industry standard simulation model for FDSOI, all presented by the developers of the model - Explains the complex operation of the FDSOI device and its use of two independent control inputs - Addresses the parameter extraction challenges for those using this model
Author: Aida Todri-Sanial
Publisher: CRC Press
ISBN: 1498710379
Category : Technology & Engineering
Languages : en
Pages : 416
Get Book Here
Book Description
Physical Design for 3D Integrated Circuits reveals how to effectively and optimally design 3D integrated circuits (ICs). It also analyzes the design tools for 3D circuits while exploiting the benefits of 3D technology. The book begins by offering an overview of physical design challenges with respect to conventional 2D circuits, and then each chapter delivers an in-depth look at a specific physical design topic. This comprehensive reference: Contains extensive coverage of the physical design of 2.5D/3D ICs and monolithic 3D ICs Supplies state-of-the-art solutions for challenges unique to 3D circuit design Features contributions from renowned experts in their respective fields Physical Design for 3D Integrated Circuits provides a single, convenient source of cutting-edge information for those pursuing 2.5D/3D technology.
Author: Kiat Seng Yeo
Publisher: World Scientific
ISBN: 981427156X
Category : Technology & Engineering
Languages : en
Pages : 358
Get Book Here
Book Description
This book provides the most comprehensive and in-depth coverage of the latest circuit design developments in RF CMOS technology. It is a practical and cutting-edge guide, packed with proven circuit techniques and innovative design methodologies for solving challenging problems associated with RF integrated circuits and systems. This invaluable resource features a collection of the finest design practices that may soon drive the system-on-chip revolution. Using this book's state-of-the-art design techniques, one can apply existing technologies in novel ways and to create new circuit designs for the future.
Author: Jinsook Kim
Publisher:
ISBN:
Category :
Languages : en
Pages : 322
Get Book Here
Book Description
