Bridge Scour Monitoring Methods at Three Sites in Wisconsin

Bridge Scour Monitoring Methods at Three Sites in Wisconsin PDF Author: J. F. Walker
Publisher:
ISBN:
Category : Scour at bridges
Languages : en
Pages : 16

Get Book

Book Description
Of the nearly 11,500 bridges in Wisconsin, 89 have been assessed with critical scour conditions. The U.S. Geological Survey, in cooperation with the Wisconsin Department of Transportation, the Marathon County Highway Department, and the Jefferson County Highway Department, performed routine monitoring of streambed elevations for three bridges. Two monitoring approaches were employed: (1) manual monitoring using moderately simple equipment, and (2) automated monitoring, using moderately sophisticated electronic equipment. The results from all three sites demonstrate that both techniques can produce reasonable measurements of streambed elevation. The manual technique has a lower annual operating cost, and is useful for cases where documentation of long-term trends is desired. The automated technique has a higher annual operating cost and is useful for real-time monitoring of episodic events with short time durations.

Bridge Scour Monitoring Methods at Three Sites in Wisconsin

Bridge Scour Monitoring Methods at Three Sites in Wisconsin PDF Author: J. F. Walker
Publisher:
ISBN:
Category : Scour at bridges
Languages : en
Pages : 16

Get Book

Book Description
Of the nearly 11,500 bridges in Wisconsin, 89 have been assessed with critical scour conditions. The U.S. Geological Survey, in cooperation with the Wisconsin Department of Transportation, the Marathon County Highway Department, and the Jefferson County Highway Department, performed routine monitoring of streambed elevations for three bridges. Two monitoring approaches were employed: (1) manual monitoring using moderately simple equipment, and (2) automated monitoring, using moderately sophisticated electronic equipment. The results from all three sites demonstrate that both techniques can produce reasonable measurements of streambed elevation. The manual technique has a lower annual operating cost, and is useful for cases where documentation of long-term trends is desired. The automated technique has a higher annual operating cost and is useful for real-time monitoring of episodic events with short time durations.

Monitoring Scour Critical Bridges

Monitoring Scour Critical Bridges PDF Author: Beatrice E. Hunt
Publisher: Transportation Research Board
ISBN: 0309098343
Category : Religion
Languages : en
Pages : 168

Get Book

Book Description


Portable Scour Monitoring Equipment

Portable Scour Monitoring Equipment PDF Author: James Douglas Schall
Publisher: Transportation Research Board
ISBN: 0309087848
Category : Scour (Hydraulic engineering)
Languages : en
Pages : 103

Get Book

Book Description
Introduction and research approach -- Findings -- Interpretation, appraisal, and applications -- Conclusions and suggested research -- References -- Appendixes.

In-situ Monitoring and Testing of IBRC Bridges in Wisconsin

In-situ Monitoring and Testing of IBRC Bridges in Wisconsin PDF Author:
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 238

Get Book

Book Description


Use of Airborne, Surface, and Borehole Geophysical Techniques at Contaminated Sites

Use of Airborne, Surface, and Borehole Geophysical Techniques at Contaminated Sites PDF Author:
Publisher:
ISBN:
Category : Earth resistance (Geophysics)
Languages : en
Pages : 308

Get Book

Book Description


Evaluation of Streambed Scour at Bridges Over Tidal Waterways in Alaska

Evaluation of Streambed Scour at Bridges Over Tidal Waterways in Alaska PDF Author: Jeffrey Scott Conaway
Publisher: CreateSpace
ISBN: 9781500495459
Category : Technology & Engineering
Languages : en
Pages : 38

Get Book

Book Description
The potential for streambed scour was evaluated at 41 bridges that cross tidal waterways in Alaska. These bridges are subject to several coastal and riverine processes that have the potential, individually or in combination, to induce streambed scour or to damage the structure or adjacent channel. The proximity of a bridge to the ocean and water-surface elevation and velocity data collected over a tidal cycle were criteria used to identify the flow regime at each bridge, whether tidal, riverine, or mixed, that had the greatest potential to induce streambed scour. Water-surface elevations measured through at least one tide cycle at 32 bridges were correlated to water levels at the nearest tide station. Asymmetry of the tidal portion of the hydrograph during the outgoing tide at 12 bridges indicated that riverine flows were stored upstream of the bridge during the tidal exchange. This scenario results in greater discharges and velocities during the outgoing tide compared to those on the incoming tide. Velocity data were collected during outgoing tides at 10 bridges that experienced complete flow reversals, and measured velocities during the outgoing tide exceeded the critical velocity required to initiate sediment transport at three sites. The primary risk for streambed scour at most of the sites considered in this study is from riverine flows rather than tidal fluctuations. A scour evaluation for riverine flow was completed at 35 bridges. Scour from riverine flow was not the primary risk for six tidally-controlled bridges and therefore not evaluated at those sites. Field data including channel cross sections, a discharge measurement, and a water-surface slope were collected at the 35 bridges. Channel instability was identified at 14 bridges where measurable scour and or fill were noted in repeated surveys of channel cross sections at the bridge. Water-surface profiles for the 1-percent annual exceedance probability discharge were calculated by using the Hydrologic Engineering Center's River Analysis System model, and scour depths were calculated using methods recommended by the Federal Highway Administration. Computed contraction-scour depths were greater than 2.0 feet at five bridges and computed pier-scour depths were 4.0 feet or greater at 15 bridges. The potential for streambed scour by both coastal and riverine processes at the bridges considered in this study were evaluated, ranked, and summed to determine a cumulative risk factor for each bridge. Possible factors that could mitigate the scour risks were investigated at 22 bridges that had high individual or cumulative rankings. Mitigating factors such as piers founded in bedrock, deep pier foundations relative to scour depths, and lack of observed scour during field measurements were documented for 13 sites, but additional study and monitoring is needed to better quantify the streambed scour potential for nine sites. Three bridges prone to being affected by storm surges will require more data collection and possibly complex hydrodynamic modeling to accurately quantify the streambed scour potential. Continuous monitoring of water-surface and streambed elevation at one or more piers is needed for two bridges to better understand the tidal and riverine influences on streambed scour.

Predicting Scour of Bedrock in Wisconsin

Predicting Scour of Bedrock in Wisconsin PDF Author: Hani Hasan Titi
Publisher:
ISBN:
Category : Bridges
Languages : en
Pages : 0

Get Book

Book Description


Selected Water Resources Abstracts

Selected Water Resources Abstracts PDF Author:
Publisher:
ISBN:
Category : Hydrology
Languages : en
Pages : 962

Get Book

Book Description


Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems

Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems PDF Author: Alphose Zingoni
Publisher: CRC Press
ISBN: 1000824314
Category : Technology & Engineering
Languages : en
Pages : 749

Get Book

Book Description
Current Perspectives and New Directions in Mechanics, Modelling and Design of Structural Systems comprises 330 papers that were presented at the Eighth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2022, Cape Town, South Africa, 5-7 September 2022). The topics featured may be clustered into six broad categories that span the themes of mechanics, modelling and engineering design: (i) mechanics of materials (elasticity, plasticity, porous media, fracture, fatigue, damage, delamination, viscosity, creep, shrinkage, etc); (ii) mechanics of structures (dynamics, vibration, seismic response, soil-structure interaction, fluid-structure interaction, response to blast and impact, response to fire, structural stability, buckling, collapse behaviour); (iii) numerical modelling and experimental testing (numerical methods, simulation techniques, multi-scale modelling, computational modelling, laboratory testing, field testing, experimental measurements); (iv) design in traditional engineering materials (steel, concrete, steel-concrete composite, aluminium, masonry, timber); (v) innovative concepts, sustainable engineering and special structures (nanostructures, adaptive structures, smart structures, composite structures, glass structures, bio-inspired structures, shells, membranes, space structures, lightweight structures, etc); (vi) the engineering process and life-cycle considerations (conceptualisation, planning, analysis, design, optimization, construction, assembly, manufacture, maintenance, monitoring, assessment, repair, strengthening, retrofitting, decommissioning). Two versions of the papers are available: full papers of length 6 pages are included in an e-book, while short papers of length 2 pages, intended to be concise but self-contained summaries of the full papers, are in this printed book. This work will be of interest to civil, structural, mechanical, marine and aerospace engineers, as well as planners and architects.

Structural Health Monitoring

Structural Health Monitoring PDF Author: N. Rajic
Publisher: Materials Research Forum LLC
ISBN: 1644902451
Category : Technology & Engineering
Languages : en
Pages : 396

Get Book

Book Description
The book presents the proceedings of the 9th Asia-Pacific Workshop on Structural Health Monitoring. With the increasing worldwide emphasis on asset sustainability, there is a trend toward Condition-Based Maintenance (CBM) and Reliability-Centred Maintenance (RCM). Both approaches require diagnostic systems which detect damage and monitor structural health and/or prognostic systems that predict the future health of a structure. Keywords: Vibration Monitoring, Railway Bridge, Strain-based Damage, Turbine Blades, Crack and Temperature Sensing, Bone Degradation, Prefabricated Concrete Frame, Impact Damage in Composites, Ferroelectric Single Crystals, Evaluation of Human Injury, Automatic Damage Assessment, Metal-Composite Plates, Osseointegration, High-rise Buildings, Acoustic Emission Source. Earthquake, Wind Turbine Rotor Blades. Smart Cables, Thermal Damages, Cement Materials, Multi-parameter Monitoring, Petri Net Model, Maintenance Strategies, Load Bearing Antenna, Thin Metal Joints, Aerospace Structure.