Author: Bertel J. Hansen
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 120
Book Description
A modern computer based automatic data acquisition/control system was installed at the Department of Aeronautics' Combustion Laboratory. This system utilizes an HP-85 desktop computer as system controller for the HP-3054A data acquisition system. Large quantities of high quality data can be acquired at high data rates and stored for future use or processed real time in closed loop feedback control circuis for precise process control and display. Other electromechanical equipment such as Visicorders provide analog real time data and run in parallel with digital equipment but can be remotely controlled for precise timing of experiments. Interactive programs on the HP-85 computer allow the experimenter to do preliminary calculations, initial experiment set-up, and to perform accurate process control of system functions. On line data reduction and display of results is performed by the system CRT display, the 7225B Plotter, or the system printer. Four basic experiments/experimental apparatuses are currently automated using the automatic data acquisition system; a light scattering experiment, a vitiated air heater, a solid fuel ramjet, and a turbojet combustor test rig. The first three applications are discussed in subsequent sections along with the measurement techniques used to implement the process.
Automatic Control and Data Acquisition System for Combustion Laboratory Applications
Author: Bertel J. Hansen
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 120
Book Description
A modern computer based automatic data acquisition/control system was installed at the Department of Aeronautics' Combustion Laboratory. This system utilizes an HP-85 desktop computer as system controller for the HP-3054A data acquisition system. Large quantities of high quality data can be acquired at high data rates and stored for future use or processed real time in closed loop feedback control circuis for precise process control and display. Other electromechanical equipment such as Visicorders provide analog real time data and run in parallel with digital equipment but can be remotely controlled for precise timing of experiments. Interactive programs on the HP-85 computer allow the experimenter to do preliminary calculations, initial experiment set-up, and to perform accurate process control of system functions. On line data reduction and display of results is performed by the system CRT display, the 7225B Plotter, or the system printer. Four basic experiments/experimental apparatuses are currently automated using the automatic data acquisition system; a light scattering experiment, a vitiated air heater, a solid fuel ramjet, and a turbojet combustor test rig. The first three applications are discussed in subsequent sections along with the measurement techniques used to implement the process.
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 120
Book Description
A modern computer based automatic data acquisition/control system was installed at the Department of Aeronautics' Combustion Laboratory. This system utilizes an HP-85 desktop computer as system controller for the HP-3054A data acquisition system. Large quantities of high quality data can be acquired at high data rates and stored for future use or processed real time in closed loop feedback control circuis for precise process control and display. Other electromechanical equipment such as Visicorders provide analog real time data and run in parallel with digital equipment but can be remotely controlled for precise timing of experiments. Interactive programs on the HP-85 computer allow the experimenter to do preliminary calculations, initial experiment set-up, and to perform accurate process control of system functions. On line data reduction and display of results is performed by the system CRT display, the 7225B Plotter, or the system printer. Four basic experiments/experimental apparatuses are currently automated using the automatic data acquisition system; a light scattering experiment, a vitiated air heater, a solid fuel ramjet, and a turbojet combustor test rig. The first three applications are discussed in subsequent sections along with the measurement techniques used to implement the process.
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 994
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 994
Book Description
Energy Research Abstracts
Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 654
Book Description
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 654
Book Description
The Combustion Diagnostics Laboratory Data Acquisition and Control System
Author: Mark A. DeWilde
Publisher:
ISBN:
Category :
Languages : en
Pages : 73
Book Description
A versatile laboratory data acquisition and control computer that was designed and built for automation of a laser spectroscopy combustion diagnostics laboratory is described. The general purpose interface hardware and software is discussed in detail, along with general architectural philosophy and programming methodology. The architecture provided maximum adaptability to a wide range of experimental situations, while retaining user friendliness. The special software interfaces developed for this system allowed the use of high level languages for most tasks.
Publisher:
ISBN:
Category :
Languages : en
Pages : 73
Book Description
A versatile laboratory data acquisition and control computer that was designed and built for automation of a laser spectroscopy combustion diagnostics laboratory is described. The general purpose interface hardware and software is discussed in detail, along with general architectural philosophy and programming methodology. The architecture provided maximum adaptability to a wide range of experimental situations, while retaining user friendliness. The special software interfaces developed for this system allowed the use of high level languages for most tasks.
Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1468449192
Category : Science
Languages : en
Pages : 314
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Publisher: Springer Science & Business Media
ISBN: 1468449192
Category : Science
Languages : en
Pages : 314
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1 957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 28 (thesis year 1 983) a total of 10,661 theses titles from 26 Canadian and 197 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 28 reports theses submitted in-1983, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
ERDA Energy Research Abstracts
Author:
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 1048
Book Description
Publisher:
ISBN:
Category : Power resources
Languages : en
Pages : 1048
Book Description
NASA SP.
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 624
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 624
Book Description
Blended Learning in Engineering Education
Author: Ataur Rahman
Publisher: CRC Press
ISBN: 1351677241
Category : Business & Economics
Languages : en
Pages : 378
Book Description
Blended Learning combines the conventional face-to-face course delivery with an online component. The synergetic effect of the two modalities has proved to be of superior didactic value to each modality on its own. The highly improved interaction it offers to students, as well as direct accessibility to the lecturer, adds to the hitherto unparalleled learning outcomes. "Blended Learning in Engineering Education: Recent Developments in Curriculum, Assessment and Practice" highlights current trends in Engineering Education involving face-to-face and online curriculum delivery. This book will be especially useful to lecturers and postgraduate/undergraduate students as well as university administrators who would like to not only get an up-to-date overview of contemporary developments in this field, but also help enhance academic performance at all levels.
Publisher: CRC Press
ISBN: 1351677241
Category : Business & Economics
Languages : en
Pages : 378
Book Description
Blended Learning combines the conventional face-to-face course delivery with an online component. The synergetic effect of the two modalities has proved to be of superior didactic value to each modality on its own. The highly improved interaction it offers to students, as well as direct accessibility to the lecturer, adds to the hitherto unparalleled learning outcomes. "Blended Learning in Engineering Education: Recent Developments in Curriculum, Assessment and Practice" highlights current trends in Engineering Education involving face-to-face and online curriculum delivery. This book will be especially useful to lecturers and postgraduate/undergraduate students as well as university administrators who would like to not only get an up-to-date overview of contemporary developments in this field, but also help enhance academic performance at all levels.
An Automatic Data Acquisition and Control System
Author: J.S.B. Martins
Publisher:
ISBN:
Category :
Languages : en
Pages : 100
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 100
Book Description
Federal Software Exchange Catalog
Author:
Publisher:
ISBN:
Category : Computer software
Languages : en
Pages : 714
Book Description
Publisher:
ISBN:
Category : Computer software
Languages : en
Pages : 714
Book Description