2016GUIDELINES FOR INVESTIGATING GEOLOGIC HAZARDS AND PREPARING ENGINEERING-GEOLOGY REPORTS, WITH A SUGGESTED APPROACH TO GEOLOGIC-HAZARD ORDINANCES IN UTAH

2016GUIDELINES FOR INVESTIGATING GEOLOGIC HAZARDS AND PREPARING ENGINEERING-GEOLOGY REPORTS, WITH A SUGGESTED APPROACH TO GEOLOGIC-HAZARD ORDINANCES IN UTAH PDF Author: Steve D. Bowman
Publisher: Utah Geological Survey
ISBN: 1557919291
Category : Science
Languages : en
Pages : 217

Get Book Here

Book Description
The purpose of these guidelines for investigating geologic hazards and preparing engineering-geology reports, is to provide recommendations for appropriate, minimum investigative techniques, standards, and report content to ensure adequate geologic site characterization and geologic-hazard investigations to protect public safety and facilitate risk reduction. Such investigations provide important information on site geologic conditions that may affect or be affected by development, as well as the type and severity of geologic hazards at a site, and recommend solutions to mitigate the effects and the cost of the hazards, both at the time of construction and over the life of the development. The accompanying suggested approach to geologic-hazard ordinances and school-site investigation guidelines are intended as an aid for land-use planning and regulation by local Utah jurisdictions and school districts, respectively. Geologic hazards that are not accounted for in project planning and design often result in additional unforeseen construction and/or future maintenance costs, and possible injury or death.

2016GUIDELINES FOR INVESTIGATING GEOLOGIC HAZARDS AND PREPARING ENGINEERING-GEOLOGY REPORTS, WITH A SUGGESTED APPROACH TO GEOLOGIC-HAZARD ORDINANCES IN UTAH

2016GUIDELINES FOR INVESTIGATING GEOLOGIC HAZARDS AND PREPARING ENGINEERING-GEOLOGY REPORTS, WITH A SUGGESTED APPROACH TO GEOLOGIC-HAZARD ORDINANCES IN UTAH PDF Author: Steve D. Bowman
Publisher: Utah Geological Survey
ISBN: 1557919291
Category : Science
Languages : en
Pages : 217

Get Book Here

Book Description
The purpose of these guidelines for investigating geologic hazards and preparing engineering-geology reports, is to provide recommendations for appropriate, minimum investigative techniques, standards, and report content to ensure adequate geologic site characterization and geologic-hazard investigations to protect public safety and facilitate risk reduction. Such investigations provide important information on site geologic conditions that may affect or be affected by development, as well as the type and severity of geologic hazards at a site, and recommend solutions to mitigate the effects and the cost of the hazards, both at the time of construction and over the life of the development. The accompanying suggested approach to geologic-hazard ordinances and school-site investigation guidelines are intended as an aid for land-use planning and regulation by local Utah jurisdictions and school districts, respectively. Geologic hazards that are not accounted for in project planning and design often result in additional unforeseen construction and/or future maintenance costs, and possible injury or death.

Agro-Environmental Sustainability in MENA Regions

Agro-Environmental Sustainability in MENA Regions PDF Author: Mohamed Abu-hashim
Publisher: Springer Nature
ISBN: 3030785742
Category : Science
Languages : en
Pages : 452

Get Book Here

Book Description
This book focuses on the status quo and the latest information on the water-soil-agriculture nexus in the MENA countries. It presents several case studies and applications from e.g. Morocco, Algeria, Tunisia, Egypt and Jordan, while also sharing and discussing the latest findings. The content includes a range of agriculture-related topics that focus on: water resources management, impacts of climate change, and wastewater treatment for reuse in agriculture sectors; in addition, sustainable approaches to agricultural-based industry, organic crop production, crop water requirements, and soil environment are discussed in an updated and comprehensive review. In turn, the book discusses the applications of GIS and remote sensing as a new technology for better agriculture management, as well as its use in Egypt as a representative country. In closing, it considers the implementation of an environmental information system in data-scarce MENA countries from the standpoint of the water-food nexus, and addresses the question of climate justice in the MENA region. Exploring various dimensions of MENA country-based case studies on achieving sustainable agriculture, the book offers an invaluable source of topical information for agricultural sustainability-related stakeholders in the region, researchers and graduate students alike.

Alluvial Fan Flooding

Alluvial Fan Flooding PDF Author: National Research Council
Publisher: National Academies Press
ISBN: 0309055423
Category : Science
Languages : en
Pages : 183

Get Book Here

Book Description
Alluvial fans are gently sloping, fan-shaped landforms common at the base of mountain ranges in arid and semiarid regions such as the American West. Floods on alluvial fans, although characterized by relatively shallow depths, strike with little if any warning, can travel at extremely high velocities, and can carry a tremendous amount of sediment and debris. Such flooding presents unique problems to federal and state planners in terms of quantifying flood hazards, predicting the magnitude at which those hazards can be expected at a particular location, and devising reliable mitigation strategies. Alluvial Fan Flooding attempts to improve our capability to determine whether areas are subject to alluvial fan flooding and provides a practical perspective on how to make such a determination. The book presents criteria for determining whether an area is subject to flooding and provides examples of applying the definition and criteria to real situations in Arizona, California, New Mexico, Utah, and elsewhere. The volume also contains recommendations for the Federal Emergency Management Agency, which is primarily responsible for floodplain mapping, and for state and local decisionmakers involved in flood hazard reduction.

Guidelines for the Geologic Evaluation of Debris-flow Hazards on Alluvial Fans in Utah

Guidelines for the Geologic Evaluation of Debris-flow Hazards on Alluvial Fans in Utah PDF Author: Richard E. Giraud
Publisher: Utah Geological Survey
ISBN: 1557917299
Category : Science
Languages : en
Pages : 21

Get Book Here

Book Description
The Utah Geological Survey (UGS) developed these guidelines to help geologists evaluate debris-flow hazards on alluvial fans to ensure safe development. Debris-flow hazard evaluations are particularly important because alluvial fans are the primary sites of debris-flow deposition and are also favored sites for development. The purpose of a debris-flow-hazard evaluation is to characterize the hazard and provide design parameters for risk reduction. The UGS recommends critical facilities and structures for human occupancy not be placed in active debris flow travel and deposition areas unless the risk is reduced to an acceptable level. These guidelines use the characteristics of alluvial fan deposits as well as drainage-basin and feeder-channel sediment-supply conditions to evaluate debris-flow hazards. The hazard evaluation relies on the geomorphology, sedimentology, and stratigraphy of existing alluvial fan deposits. Analysis of alluvial-fan deposits provides the geologic basis for estimating frequency and potential volume of debris flows and describing debris-flow behavior. Drainage-basin and feeder-channel characteristics determine potential debris-flow susceptibility and the volume of stored channel sediment available for sediment bulking in future flows.

Guidelines for Evaluating Landslide Hazards in Utah

Guidelines for Evaluating Landslide Hazards in Utah PDF Author: Michael D. Hylland
Publisher:
ISBN: 9781557913920
Category : Landslide hazard analysis
Languages : en
Pages : 16

Get Book Here

Book Description


Proceedings of GeoShanghai 2018 International Conference: Rock Mechanics and Rock Engineering

Proceedings of GeoShanghai 2018 International Conference: Rock Mechanics and Rock Engineering PDF Author: Lianyang Zhang
Publisher: Springer
ISBN: 9811301131
Category : Science
Languages : en
Pages : 422

Get Book Here

Book Description
This book is the third volume of the proceedings of the 4th GeoShanghai International Conference that was held on May 27 - 30, 2018. This volume, entitled “Rock Mechanics and Rock Engineering” , covers the recent advances and technologies in rock mechanics and rock engineering. These papers are grouped in three categories: (1) Theoretical and numerical study of rock behaviours, (2) Experimental study of rock behaviours, and (3) Applications of rock mechanics and case studies. This volume presents the state-of-the-art theories, methodologies and findings in the related areas. The book may benefit researchers and scientists from the academic fields of rock mechanics and rock engineering, geotechnical engineering, geoenvironmental engineering, transportation engineering, geology, mining and energy, as well as practical engineers from the industry. Each of the papers included in this book received at least two positive peer reviews. The editors would like to express their sincerest appreciation to all of the anonymous reviewers all over the world, for their diligent work.

Earthquake Probabilities for the Wasatch Front Region in Utah, Idaho, and Wyoming

Earthquake Probabilities for the Wasatch Front Region in Utah, Idaho, and Wyoming PDF Author: Working Group on Utah Earthquake Probabilities
Publisher:
ISBN: 9781557919236
Category : Earthquake hazard analysis
Languages : en
Pages : 164

Get Book Here

Book Description
This publication presents probabilistic earthquake forecasts developed by the Working Group on Utah Earthquake Probabilities which developed 30,50, and 100 year forecasts that include combined time dependent probabilities of large earthquakes for the five central segments of the Wasatch Fault Zone.

Handbook of Signal Processing in Acoustics

Handbook of Signal Processing in Acoustics PDF Author:
Publisher: Springer Science & Business Media
ISBN: 0387776982
Category :
Languages : en
Pages : 1932

Get Book Here

Book Description


An Introduction to Acoustical Holography

An Introduction to Acoustical Holography PDF Author: B. P. Hildebrand
Publisher: Springer Science & Business Media
ISBN: 1461586577
Category : Science
Languages : en
Pages : 235

Get Book Here

Book Description
Since the first papers by E. N. Leith and J. Upatnieks on the subject of holography appeared in 1961, there has been a virtual explosion of research activity in the field. More than SOO papers and articles on holo graphy have appeared in the last ten years. Many applications of holo graphy have been proposed, and some of these are beginning to enter the realm of usefulness. One of the applications that appears to hold great promise is acoustic imaging by means of holography. The first papers on this subject appeared in 1966. but already research activity in the field is burgeoning. Tbree symposia whoUy devoted to acoustical holography have been held and tbe papers published in book form. The purpose of this book is to bring together the results of research in acoustical holography, some of it as yet unpublished, under one cover so that workers in holography, nondestructive testing, medical imaging, underwater imaging, and seismic exploration can decide whether this new technique can be useful to them.

Seismic Hazards and Risk

Seismic Hazards and Risk PDF Author: T. G. Sitharam
Publisher: Springer Nature
ISBN: 9811599769
Category : Science
Languages : en
Pages : 392

Get Book Here

Book Description
This volume presents select papers presented at the 7th International Conference on Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics. The papers discuss advances in the fields of soil dynamics and geotechnical earthquake engineering. Some of the themes include seismic risk assessment, engineering seismology, wave propagation, remote sensing applications for geohazards,engineering vibrations, etc. A strong emphasis is placed on connecting academic research and field practice, with many examples, case studies, best practices, and discussions on performance based design. This volume will be of interest to researchers and practicing engineers alike.