Author: Michael J Werle
Publisher:
ISBN:
Category : Jets
Languages : en
Pages : 174
Book Description
The report describes the results of an experimental study concerning the injection of a gaseous secondary jet into an unbounded supersonic flow field which was uniform outside of a turbulent boundary layer. The investigation was principally concerned with the definition of the proper scale length to be associated with turbulent two-dimensional jet-interaction flows. In support of this objective, results are presented for a Mach 4 test conducted using a flat-plate model containing a sonic secondary jet directed normal to the mainstream. Secondary jet strengths were varied from approximately 0 to 1000 for jet throat sizes of 0.005 inch, 0.020 inch and 0.030 inch. The jet interaction phenomenon was studied using detailed surface pressure distributions measured fore and aft of the secondary jet in conjunction with comprehensive shadowgraph coverage of the interaction flow field. (Author).
Two-dimensional Jet Interaction with a Mach 4 Mainstream
Author: Michael J Werle
Publisher:
ISBN:
Category : Jets
Languages : en
Pages : 174
Book Description
The report describes the results of an experimental study concerning the injection of a gaseous secondary jet into an unbounded supersonic flow field which was uniform outside of a turbulent boundary layer. The investigation was principally concerned with the definition of the proper scale length to be associated with turbulent two-dimensional jet-interaction flows. In support of this objective, results are presented for a Mach 4 test conducted using a flat-plate model containing a sonic secondary jet directed normal to the mainstream. Secondary jet strengths were varied from approximately 0 to 1000 for jet throat sizes of 0.005 inch, 0.020 inch and 0.030 inch. The jet interaction phenomenon was studied using detailed surface pressure distributions measured fore and aft of the secondary jet in conjunction with comprehensive shadowgraph coverage of the interaction flow field. (Author).
Publisher:
ISBN:
Category : Jets
Languages : en
Pages : 174
Book Description
The report describes the results of an experimental study concerning the injection of a gaseous secondary jet into an unbounded supersonic flow field which was uniform outside of a turbulent boundary layer. The investigation was principally concerned with the definition of the proper scale length to be associated with turbulent two-dimensional jet-interaction flows. In support of this objective, results are presented for a Mach 4 test conducted using a flat-plate model containing a sonic secondary jet directed normal to the mainstream. Secondary jet strengths were varied from approximately 0 to 1000 for jet throat sizes of 0.005 inch, 0.020 inch and 0.030 inch. The jet interaction phenomenon was studied using detailed surface pressure distributions measured fore and aft of the secondary jet in conjunction with comprehensive shadowgraph coverage of the interaction flow field. (Author).
The Shock Heights of Static Free Jets
Author: Richard T. Driftmyer
Publisher:
ISBN:
Category : Flow visualization
Languages : en
Pages : 62
Book Description
The report describes the results of an experimental study involving a two-dimensional, underexpanded, free jet flowing into a static medium. The investigation was concerned with the determination of jet heights as a function of the nozzle flow properties. In support of this objective experimental results of two supersonic nozzles (Mach numbers of 2.89 and 2.99 and throat widths of 0.0335 inch and 0.0204 inch, respectively) are presented along with a complete data tabulation which includes photographs. A universal data correlation, expanded to include the axisymmetric jet case, is presented.
Publisher:
ISBN:
Category : Flow visualization
Languages : en
Pages : 62
Book Description
The report describes the results of an experimental study involving a two-dimensional, underexpanded, free jet flowing into a static medium. The investigation was concerned with the determination of jet heights as a function of the nozzle flow properties. In support of this objective experimental results of two supersonic nozzles (Mach numbers of 2.89 and 2.99 and throat widths of 0.0335 inch and 0.0204 inch, respectively) are presented along with a complete data tabulation which includes photographs. A universal data correlation, expanded to include the axisymmetric jet case, is presented.
Bibliography of Scientific and Industrial Reports
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 922
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 922
Book Description
Correlation Parameters for Two-dimensional Jet Interaction
Author: Richard E. Lottero
Publisher:
ISBN:
Category : Boundary layer
Languages : en
Pages : 62
Book Description
The problem considered is the separation of the boundary layer on a flat plate in a high supersonic free stream caused by the normal injection of a two-dimensional sonic or supersonic jet. Only the separation region forward of the jet is discussed. Data from existing literature has been analyzed to form dimensionless correlation parameters that will accurately predict the force, center-of-pressure, and separation length that characterize this forward separation region. Problems related to the nozzle discharge coefficient are discussed. The functional relations of these correlations with respect to changes in jet stagnation temperature and pressure, nozzle throat width, and Mach number for fixed free stream conditions are also discussed. (Author Modified Abstract).
Publisher:
ISBN:
Category : Boundary layer
Languages : en
Pages : 62
Book Description
The problem considered is the separation of the boundary layer on a flat plate in a high supersonic free stream caused by the normal injection of a two-dimensional sonic or supersonic jet. Only the separation region forward of the jet is discussed. Data from existing literature has been analyzed to form dimensionless correlation parameters that will accurately predict the force, center-of-pressure, and separation length that characterize this forward separation region. Problems related to the nozzle discharge coefficient are discussed. The functional relations of these correlations with respect to changes in jet stagnation temperature and pressure, nozzle throat width, and Mach number for fixed free stream conditions are also discussed. (Author Modified Abstract).
Applied Mechanics Reviews
Author:
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 300
Book Description
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 300
Book Description
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 542
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 542
Book Description
A Forward Facing Step Study
Author: Richard T. Driftmyer
Publisher:
ISBN:
Category : Turbulent boundary layer
Languages : en
Pages : 96
Book Description
An experimental investigation involving a thick, adiabatic, naturally turbulent, two-dimensional boundary layer undergoing separation has been completed at the Naval Ordnance Laboratory (NOL). Forward facing steps (with attached end plates) were used to induce boundary-layer separation for the particular case where the step heights, h, were less than the boundary-layer thickness, delta. The tests were conducted at a free-stream Mach number of 4.9 with a range of unit Reynolds numbers varying from 0.8 x 10 to the 6th power per foot to 4.0 x 10 to the 6th power per foot. The pressure distributions measured in the separated region ahead of the steps were found to be functions of both Re sub delta and h/delta for the turbulent boundary-layer separation case where h
Publisher:
ISBN:
Category : Turbulent boundary layer
Languages : en
Pages : 96
Book Description
An experimental investigation involving a thick, adiabatic, naturally turbulent, two-dimensional boundary layer undergoing separation has been completed at the Naval Ordnance Laboratory (NOL). Forward facing steps (with attached end plates) were used to induce boundary-layer separation for the particular case where the step heights, h, were less than the boundary-layer thickness, delta. The tests were conducted at a free-stream Mach number of 4.9 with a range of unit Reynolds numbers varying from 0.8 x 10 to the 6th power per foot to 4.0 x 10 to the 6th power per foot. The pressure distributions measured in the separated region ahead of the steps were found to be functions of both Re sub delta and h/delta for the turbulent boundary-layer separation case where h
Two-Dimensional Jet Interaction with a Mach 4 Mainstream
Author: Richard T. Driftmyer
Publisher:
ISBN:
Category :
Languages : en
Pages : 147
Book Description
The report describes the results of an experimental study concerning the injection of a gaseous secondary jet into an unbounded supersonic flow field which was uniform outside of a turbulent boundary layer. The investigation was principally concerned with the definition of the proper scale length to be associated with turbulent two-dimensional jet-interaction flows. In support of this objective, results are presented for a Mach 4 test conducted using a flat-plate model containing a sonic secondary jet directed normal to the mainstream. Secondary jet strengths were varied from approximately 0 to 1000 for jet throat sizes of 0.005 inch, 0.020 inch and 0.030 inch. The jet interaction phenomenon was studied using detailed surface pressure distributions measured fore and aft of the secondary jet in conjunction with comprehensive shadowgraph coverage of the interaction flow field. (Author).
Publisher:
ISBN:
Category :
Languages : en
Pages : 147
Book Description
The report describes the results of an experimental study concerning the injection of a gaseous secondary jet into an unbounded supersonic flow field which was uniform outside of a turbulent boundary layer. The investigation was principally concerned with the definition of the proper scale length to be associated with turbulent two-dimensional jet-interaction flows. In support of this objective, results are presented for a Mach 4 test conducted using a flat-plate model containing a sonic secondary jet directed normal to the mainstream. Secondary jet strengths were varied from approximately 0 to 1000 for jet throat sizes of 0.005 inch, 0.020 inch and 0.030 inch. The jet interaction phenomenon was studied using detailed surface pressure distributions measured fore and aft of the secondary jet in conjunction with comprehensive shadowgraph coverage of the interaction flow field. (Author).
Aerodynamic Interference Induced by Reaction Controls
Author: F. W. Spaid
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 78
Book Description
Publisher:
ISBN:
Category : Aerodynamics
Languages : en
Pages : 78
Book Description
Government Reports Announcements
Author:
Publisher:
ISBN:
Category : Research
Languages : en
Pages : 1018
Book Description
Publisher:
ISBN:
Category : Research
Languages : en
Pages : 1018
Book Description