Author: Ajax Manufacturing Co
Publisher:
ISBN:
Category : Dies (Metal-working)
Languages : en
Pages :
Book Description
Trade Catalogs on Wire Drawers, Forging Machines, Twin Geared Upsetting Forging Machines, Forging Presses, Forging Rolls, Dies, Drawing, Straightening and Cut-off Machines, Bolt and Rivet Headers, Nut Machines, and Bulldozers
Author: Ajax Manufacturing Co
Publisher:
ISBN:
Category : Dies (Metal-working)
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category : Dies (Metal-working)
Languages : en
Pages :
Book Description
Trade Catalogs on Continuous Motion Heading Machines; Bolt Heading, Upsetting Forging Machines; Twin Geared Upsetting Forging Machines; Bolt Heading and Forging Machines; Hot Sawing and Burring Machines; Forging Presses; Forging Rolls; Wire Drawers; Bulldozers and Upset Forgings.
Author: Ajax Manufacturing Co
Publisher:
ISBN:
Category : Drawing (Metal-work)
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category : Drawing (Metal-work)
Languages : en
Pages :
Book Description
Machine Forging
Author: Douglas Thomas Hamilton
Publisher:
ISBN:
Category : Forging
Languages : en
Pages : 120
Book Description
Publisher:
ISBN:
Category : Forging
Languages : en
Pages : 120
Book Description
Trade Catalogs on Forging Machinery, Power Presses, and Bolt, Nut, Rivet, and Wire Nails Machinery
Author: National Machinery Co
Publisher:
ISBN:
Category : Forging machinery
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category : Forging machinery
Languages : en
Pages :
Book Description
Machine Forging (Classic Reprint)
Author: Douglas T. Hamilton
Publisher: Forgotten Books
ISBN: 9780266456803
Category : Technology & Engineering
Languages : en
Pages : 48
Book Description
Excerpt from Machine Forging The upsetting and forging machine might be considered to a certain extent as a further development of the bolt and rivet making machine, which was originated almost a century ago; but forging machines are built much heavier than bolt and rivet machines and are designed especially to meet the demands in the production of difficult-shaped and heavy forgings. For the heavier types of machines, the base or main frame, as a rule, is made from one solid steel casting. A typical upsetting and forging machine designed for heavy service is shown in Fig. 1. The bed of this machine is made from one solid casting of semi-steel. In order to provide against breakage caused by accidentally placing work between the dies, upsetting and forging ma chines are usually furnished with various safety devices to prevent serious damage to the machine. The safety device in this machine consists of a toggle-joint mechanism for operating the movable grip ping-die slide. The gripping die slide A, Fig. 1, is operated by two cams B and C' on the main crankshaft D. Cam B serves to close the dies which grip the work; cam C operates the opening mechanism for the dies. These cams are in contact with chilled cast-iron rolls E and F carried in the toggle slide G. The automatic grip relief is controlled by the by-pass toggle H and heavy coil spring I. This toggle does not come into play until the strain is such that it would cause damage to the working mechanism of the machine, or in other words until the maximum power required to hold the movable die from springing away, ' is attained. The relief resets automatically on the back stroke of the machine, thus making a second blow possible without delay. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Publisher: Forgotten Books
ISBN: 9780266456803
Category : Technology & Engineering
Languages : en
Pages : 48
Book Description
Excerpt from Machine Forging The upsetting and forging machine might be considered to a certain extent as a further development of the bolt and rivet making machine, which was originated almost a century ago; but forging machines are built much heavier than bolt and rivet machines and are designed especially to meet the demands in the production of difficult-shaped and heavy forgings. For the heavier types of machines, the base or main frame, as a rule, is made from one solid steel casting. A typical upsetting and forging machine designed for heavy service is shown in Fig. 1. The bed of this machine is made from one solid casting of semi-steel. In order to provide against breakage caused by accidentally placing work between the dies, upsetting and forging ma chines are usually furnished with various safety devices to prevent serious damage to the machine. The safety device in this machine consists of a toggle-joint mechanism for operating the movable grip ping-die slide. The gripping die slide A, Fig. 1, is operated by two cams B and C' on the main crankshaft D. Cam B serves to close the dies which grip the work; cam C operates the opening mechanism for the dies. These cams are in contact with chilled cast-iron rolls E and F carried in the toggle slide G. The automatic grip relief is controlled by the by-pass toggle H and heavy coil spring I. This toggle does not come into play until the strain is such that it would cause damage to the working mechanism of the machine, or in other words until the maximum power required to hold the movable die from springing away, ' is attained. The relief resets automatically on the back stroke of the machine, thus making a second blow possible without delay. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Forging Operations - Machine Forging, Forging Dies and Special Forging Operations
Author: Anon
Publisher: Read Books Ltd
ISBN: 1473339766
Category : Crafts & Hobbies
Languages : en
Pages : 231
Book Description
This vintage book contains a complete guide to the various different operating involved in forging, covering machine forging, forging dies, heating furnaces, estimating stock, and all other related aspects. "Forging Operations" will be of special appeal to those with an interest in the history and development of forging and would make for a fantastic addition to collections of literature related to blacksmithing. Contents include: "Forging Machines", "Introduction", "Rolls", "Hammers", "Swaging Machines", "Presses", "Upsetting Machine", "Punches and Shears", "Riveting Machines", "Bulldozer", "Forging Dies", "Forms of Forging Dies", "Drop-Forging Dies", "Heading and Bending Dies", "Heading-machine dies; Bending dies", et cetera Many vintage books such as this are increasingly scarce and expensive. We are republishing this volume now in an affordable, modern edition complete with a specially commissioned new introduction on blacksmithing.
Publisher: Read Books Ltd
ISBN: 1473339766
Category : Crafts & Hobbies
Languages : en
Pages : 231
Book Description
This vintage book contains a complete guide to the various different operating involved in forging, covering machine forging, forging dies, heating furnaces, estimating stock, and all other related aspects. "Forging Operations" will be of special appeal to those with an interest in the history and development of forging and would make for a fantastic addition to collections of literature related to blacksmithing. Contents include: "Forging Machines", "Introduction", "Rolls", "Hammers", "Swaging Machines", "Presses", "Upsetting Machine", "Punches and Shears", "Riveting Machines", "Bulldozer", "Forging Dies", "Forms of Forging Dies", "Drop-Forging Dies", "Heading and Bending Dies", "Heading-machine dies; Bending dies", et cetera Many vintage books such as this are increasingly scarce and expensive. We are republishing this volume now in an affordable, modern edition complete with a specially commissioned new introduction on blacksmithing.
Machine Forging
Author: Douglas T. Hamilton
Publisher: Forgotten Books
ISBN: 9781330868072
Category : Technology & Engineering
Languages : en
Pages : 48
Book Description
Excerpt from Machine Forging Possibly the greatest advance made of late years in forging is the application of machine methods to the production of engine and machine parts. It is now possible to forge many parts from steel and wrought iron, which a few years ago could only be made from castings. This means a great saving of time and expense, as not only are machine forged parts much more rapidly made than those made from cast iron or steel castings, but they also cost considerably less to manufacture in large quantities. In the following, interesting examples of different types of upsets, bending and forming operations, etc., will be illustrated and described, together with a general description of the dies and tools used. This will give an idea of the remarkable possibilities of the upsetting and forging machine in its present-day development. The Upsetting and Forging Machine The upsetting and forging machine might be considered to a certain extent as a further development of the bolt and rivet making machine, which was originated almost a century ago; but forging machines are built much heavier than bolt and rivet machines and are designed especially to meet the demands in the production of difficult-shaped and heavy forgings. For the heavier types of machines, the base or main frame, as a rule, is made from one solid steel casting. A typical upsetting and forging machine designed for heavy service is shown in Fig. 1. The bed of this machine is made from one solid casting of semi-steel. In order to provide against breakage caused by accidentally placing work between the dies, upsetting and forging machines are usually furnished with various safety devices to prevent serious damage to the machine. The safety device in this machine consists of a toggle-joint mechanism for operating the movable gripping-die slide. The gripping die slide A, Fig. 1, is operated by two cams B and C on the main crankshaft D. Cam B serves to close the dies which grip the work; cam C operates the opening mechanism for the dies. These cams are in contact with chilled cast-iron rolls E and F carried in the toggle slide G. The automatic grip relief is controlled by the by-pass toggle Hand heavy coil spring I. This toggle does not come into play until the strain is such that it would cause damage to the working mechanism of the machine, or in other words until the maximum power required to hold the movable die from springing away, is attained. The relief resets automatically on the back stroke of the machine, thus making a second blow possible without delay. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Publisher: Forgotten Books
ISBN: 9781330868072
Category : Technology & Engineering
Languages : en
Pages : 48
Book Description
Excerpt from Machine Forging Possibly the greatest advance made of late years in forging is the application of machine methods to the production of engine and machine parts. It is now possible to forge many parts from steel and wrought iron, which a few years ago could only be made from castings. This means a great saving of time and expense, as not only are machine forged parts much more rapidly made than those made from cast iron or steel castings, but they also cost considerably less to manufacture in large quantities. In the following, interesting examples of different types of upsets, bending and forming operations, etc., will be illustrated and described, together with a general description of the dies and tools used. This will give an idea of the remarkable possibilities of the upsetting and forging machine in its present-day development. The Upsetting and Forging Machine The upsetting and forging machine might be considered to a certain extent as a further development of the bolt and rivet making machine, which was originated almost a century ago; but forging machines are built much heavier than bolt and rivet machines and are designed especially to meet the demands in the production of difficult-shaped and heavy forgings. For the heavier types of machines, the base or main frame, as a rule, is made from one solid steel casting. A typical upsetting and forging machine designed for heavy service is shown in Fig. 1. The bed of this machine is made from one solid casting of semi-steel. In order to provide against breakage caused by accidentally placing work between the dies, upsetting and forging machines are usually furnished with various safety devices to prevent serious damage to the machine. The safety device in this machine consists of a toggle-joint mechanism for operating the movable gripping-die slide. The gripping die slide A, Fig. 1, is operated by two cams B and C on the main crankshaft D. Cam B serves to close the dies which grip the work; cam C operates the opening mechanism for the dies. These cams are in contact with chilled cast-iron rolls E and F carried in the toggle slide G. The automatic grip relief is controlled by the by-pass toggle Hand heavy coil spring I. This toggle does not come into play until the strain is such that it would cause damage to the working mechanism of the machine, or in other words until the maximum power required to hold the movable die from springing away, is attained. The relief resets automatically on the back stroke of the machine, thus making a second blow possible without delay. About the Publisher Forgotten Books publishes hundreds of thousands of rare and classic books. Find more at www.forgottenbooks.com This book is a reproduction of an important historical work. Forgotten Books uses state-of-the-art technology to digitally reconstruct the work, preserving the original format whilst repairing imperfections present in the aged copy. In rare cases, an imperfection in the original, such as a blemish or missing page, may be replicated in our edition. We do, however, repair the vast majority of imperfections successfully; any imperfections that remain are intentionally left to preserve the state of such historical works.
Machinery's Reference Series
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 44
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 44
Book Description
Drop Forging, Die Sinking and Machine Forming of Steel - Modern Shop Practice, Processes, Methods, Machines, Tools and Details
Author: Joseph Vincent Woodworth
Publisher: Read Books Ltd
ISBN: 1447486218
Category : Crafts & Hobbies
Languages : en
Pages : 429
Book Description
This vintage book contains a comprehensive guide to accurate tool and die making, steel treatment, drop forging, die sinking, power presses, and shop practice for the production of duplicate metal parts. Profusely illustrated and full of invaluable tips, this volume will be of considerable utility to the modern reader with an interest in metalworking, and would make for a fantastic addition to collections of allied literature. Contents include: “Die-Sinking and Drop-Forging Practise and Design for Modern Forging, Pressing, and Stamping of Duplicate Metal Parts”, “Die-Sinking and Embossing Practise Methods, Processes, Machines, and Tools”, “Drop-Forging Dies, Their Design, Construction, and Use in Drop-Hammer, Drop-Press, and Forging-Machine”, etc. Many vintage books such as this are becoming increasingly scarce and expensive. We are republishing this volume now in an affordable, high-quality edition complete with a specially commissioned new introduction on metal work.
Publisher: Read Books Ltd
ISBN: 1447486218
Category : Crafts & Hobbies
Languages : en
Pages : 429
Book Description
This vintage book contains a comprehensive guide to accurate tool and die making, steel treatment, drop forging, die sinking, power presses, and shop practice for the production of duplicate metal parts. Profusely illustrated and full of invaluable tips, this volume will be of considerable utility to the modern reader with an interest in metalworking, and would make for a fantastic addition to collections of allied literature. Contents include: “Die-Sinking and Drop-Forging Practise and Design for Modern Forging, Pressing, and Stamping of Duplicate Metal Parts”, “Die-Sinking and Embossing Practise Methods, Processes, Machines, and Tools”, “Drop-Forging Dies, Their Design, Construction, and Use in Drop-Hammer, Drop-Press, and Forging-Machine”, etc. Many vintage books such as this are becoming increasingly scarce and expensive. We are republishing this volume now in an affordable, high-quality edition complete with a specially commissioned new introduction on metal work.
MACHINE FORGING
Author: DOUGLAS THOMAS. HAMILTON
Publisher:
ISBN: 9781033053577
Category :
Languages : en
Pages : 0
Book Description
Publisher:
ISBN: 9781033053577
Category :
Languages : en
Pages : 0
Book Description