Trade Catalogs on Hydraulic Brake, Refrigerator and Aircraft Parts, Tube and Pipe Fittings, Hoses, Hose Assemblies, Drain and Shut-off Cocks, Automobile Parts, Refrigeration Valves and Fittings, Hydraulic Brake Fittings, Gas Tank Caps, Airplane, Gasoline, Oil, Hydraulic and Air Valves, Actuating Cylinders, Universal, Bulkhead and Safety Tube Fittings, Fuel Line Assemblies, and Silica Gel Strainers PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Trade Catalogs on Hydraulic Brake, Refrigerator and Aircraft Parts, Tube and Pipe Fittings, Hoses, Hose Assemblies, Drain and Shut-off Cocks, Automobile Parts, Refrigeration Valves and Fittings, Hydraulic Brake Fittings, Gas Tank Caps, Airplane, Gasoline, Oil, Hydraulic and Air Valves, Actuating Cylinders, Universal, Bulkhead and Safety Tube Fittings, Fuel Line Assemblies, and Silica Gel Strainers PDF full book. Access full book title Trade Catalogs on Hydraulic Brake, Refrigerator and Aircraft Parts, Tube and Pipe Fittings, Hoses, Hose Assemblies, Drain and Shut-off Cocks, Automobile Parts, Refrigeration Valves and Fittings, Hydraulic Brake Fittings, Gas Tank Caps, Airplane, Gasoline, Oil, Hydraulic and Air Valves, Actuating Cylinders, Universal, Bulkhead and Safety Tube Fittings, Fuel Line Assemblies, and Silica Gel Strainers by Weatherhead Company. Download full books in PDF and EPUB format.
Author: Weatherhead Company
Publisher:
ISBN:
Category : Airplanes
Languages : en
Pages :
Get Book Here
Book Description
Author: Weatherhead Company
Publisher:
ISBN:
Category : Airplanes
Languages : en
Pages :
Get Book Here
Book Description
Author: Hydraulic Hose and Hose Fittings Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This recommended practice covers minimum requirements for air brake hose assemblies made from reinforcedelastomeric hose and suitable fittings for use in automotive air brake systems including flexible connections from frame toaxle, tractor to trailer, trailer to trailer and other unshielded air lines with air pressures up to 1 MPa, that are exposed topotential pull or impact. This hose is not to be used where temperatures, external or internal, fall outside the range of-40 °C to +100 °C.This revision adds a fourth hose type, AIII, for use with permanent fittings only. Table 1 has been revised and nowcontains hoses A and AIII, Table 2 has been added for hoses AI and AII. All other Tables were renumbered accordingly.A note has been added that hose Type AIII in Table 1 can only be coupled with permanent fittings.
Author:
Publisher:
ISBN:
Category : Hydraulic brakes
Languages : en
Pages : 20
Get Book Here
Book Description
Author: Air Brake Tubing and Tube Ftg Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Standard covers complete general and dimensional specifications for refrigeration tube fittings of the flare type specified in Figures 1 to 42 and Tables 1 to 15. These fittings are intended for general use with flared annealed copper tubing in refrigeration applications.Dimensions of single and double 45 degree flares on tubing to be used in conjunction with these fittings are given in Figure 2 and Table 1 of SAE J533.The following general specifications supplement the dimensional data contained in Tables 1 to 15 with respect to all unspecified details.
Author: John [From Old Catalog] Platt
Publisher: Legare Street Press
ISBN: 9781018206394
Category : History
Languages : en
Pages : 0
Get Book Here
Book Description
This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
Author: H.E. Linney Co
Publisher:
ISBN:
Category : Hose
Languages : en
Pages :
Get Book Here
Book Description
Author: Hydraulic Hose and Hose Fittings Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
SAE J1273 provides guidelines for selection, routing, fabrication, installation, replacement, maintenance, and storage of hose and hose assemblies for hydraulic fluid-power systems. Many of these SAE Recommended Practices also may be suitable for other hoses and systems. J1273 has been reaffirmed to comply with the SAE five-year review policy.
Author: Hydraulic Hose and Hose Fittings Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This specification covers six types of air hose intended for use in automotive air brake systems. The system includes all air actuated equipment leading from the air brake line. These types of hose are not to be used from the air compressor to air reservoir if air temperature is in excess of 250 F. The types of hose are as follows: Type AHose shall be mandrel built having a tube and friction of oil resisting rubber, reinforced with cotton or synthetic cord or duck plies or a combination of both, and a cover of oil resisting compounds utilizing polymerized chloroprene as the basic material. Assemble with reusable or permanent type metal end fittings. Type BHose shall be nonmandrel built having a tube and friction of oil resisting rubber, reinforced with cotton or synthetic cord or duck plies or a combination of both, and a cover of oil resisting compounds utilizing polymerized chloroprene as the basic material. Assemble with reusable or permanent type metal end fittings. Type CHose shall be mandrel built having a tube of oil resisting rubber, reinforced with one braid of high tensile steel wire and a cover of oil resisting compounds utilizing polymerized chloroprene as the basic material. A cotton braid or other suitable material may be used to anchor the cover to the hose. Assemble with permanent type metal end fittings only. Type DHose shall be mandrel built having a tube of oil resisting rubber, reinforced by two cotton or synthetic braids separated by a wire braid. All braids are to be impregnated with an oil and age resisting compound. The wire braid may be of high tensile carbon steel or of series 300 stainless steel. Hose may also have an optional thin cover of oil resisting compound utilizing polymerized chloroprene as the basic material. Assemble with reusable or permanent type metal end fittings. Class IThe wire braid shall be of high tensile carbon steel. Class IIThe wire braid shall be of 300 series stainless steel. Type EHose shall be mandrel built having a tube of oil resisting lubber, reinforced with two cotton or synthetic braids separated by a wire braid. All braids are to be impregnated with an oil and age resisting compound. This hose is not to be used on any line where abrasion of the outer cover will be encountered in its service. Assemble with reusable type metal end fittings only. Type FHose shall be mandrel built having a tube of oil resisting rubber, reinforced with one 300 Series stainless steel braid and one fabric braid separated by an insulation layer of oil resisting rubber. The fabric braid is to be impregnated with an oil and age resistant compound. Assembled with reusable or permanent type metal end fittings.
Author: Hydraulic Hose and Hose Fittings Committee
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
This SAE Standard covers complete general and dimensional specifications for the flanged heads and split flange clamp halves applicable to four-bolt split flange type tube, pipe, and hose connections with appropriate references to the O-ring seals and attaching components used in their assembly. (See Figures 1 and 2.) Also included are recommended port dimensions and port design considerations.The flanged heads specified are incorporated into fittings having suitable means for attachment of tubes, pipes, or hoses to provide connection ends. These connections are intended for application in hydraulic systems, on industrial and commercial products, where it is desired to avoid the use of threaded connections.THE RATED WORKING PRESSURE OF A HOSE ASSEMBLY COMPRISING SAE J518 HOSE CONNECTIONS AND SAE J517 HOSE SHALL NOT EXCEED THE LOWER OF THE TWO WORKING PRESSURE RATED VALUES.Flanged heads shall be as specified in Figure 3 and Table 1. Split flange clamp halves shall be as specified in Figure 4 and Table 1. Port dimensions and spacing shall be as specified in Figure 5 and Table 2.O-ring seals, having nominal dimensions as indicated in Table 1, are used in conjunction with these connections. They shall conform to the seals specified in SAE J120, Table on Dimensions and Tolerances.Bolts for use with these connections shall be of the sizes and lengths indicated in Table 1. They shall be of SAE Grade 5 material or better as specified in SAE J429. Socket head cap screws of SAE Grade 5 material or better are acceptable.Lock washers, if used, shall be in accordance with the light spring lock washers specified in SAE J489, Dimensions of Light, Medium, Heavy, Extra Heavy, and Hi Collar Spring Lock Washers, and of sizes applicable to the corresponding bolts.The following general specifications supplement the dimensional data contained in Table 1 with respect to all unspecified detail. Superseded by SAE J518/1 and SAE J518/2.
Author: John Platt
Publisher: Wentworth Press
ISBN: 9781361130575
Category : History
Languages : en
Pages : 66
Get Book Here
Book Description
This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
