Three-dimensional Seismic Analysis of Reinforced Concrete Wall Buildings at Near-fault Sites PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Three-dimensional Seismic Analysis of Reinforced Concrete Wall Buildings at Near-fault Sites PDF full book. Access full book title Three-dimensional Seismic Analysis of Reinforced Concrete Wall Buildings at Near-fault Sites by Yuan Jie Lu. Download full books in PDF and EPUB format.
Author: Yuan Jie Lu
Publisher:
ISBN:
Category :
Languages : en
Pages : 163
Get Book Here
Book Description
This dissertation approaches the subject of three-dimensional (3D) seismic analysis of reinforced concrete (RC) wall buildings at near-fault sites by first studying two main problems separately: (1) the characterization of base excitation for buildings located at near-fault sites, and (2) modeling the behavior of RC buildings accurately including inelastic behavior and the failure mode. The dissertation culminates with the 3D response history analysis of two 20-story RC core wall buildings models, including the slabs and columns, subject to a strong near-fault ground motion record. First, the presence and characteristics of multiple pulses [with dominant period TP between 0.5 and 12 s] in historical near-fault ground motion records is studied. An iterative method for extracting multiple strong pulses imbedded in a ground motion is presented. The method is used to extract multiple strong velocity pulses from the fault-normal horizontal component of 40 pulse-like ground motion records from 17 historical earthquakes, with magnitudes ranging from MW6.3 to MW7.9, recorded at a distance less than 10 km from the fault rupture with a peak ground velocity greater than 0.6 m / s. The relationships between the dominant period of the extracted pulses, associated amplitudes, and earthquake magnitude are presented, indicating that the amplitude of the strongest pulses with 1.5 s ≤ TP ≤ 5 s, does not depend significantly on the earthquake magnitude. Next, the effect of soil-foundation-structure interaction (SFSI) for a 20-story core wall building with a caisson foundation subject to single pulse motions is investigated using two-dimensional (2D) nonlinear finite-elements and fiber beam-column elements; nonlinear site effects on the free-field motion and structural response is discussed. The nonlinear site effects for free-field motions result in a de-amplification of peak surface acceleration due to soil yielding, and a maximum of 64% amplification of peak acceleration and velocity of at specific pulse periods for deep soils. SFSI, after removing the nonlinear site effect, has a negligible effect on the maximum value of peak roof acceleration and peak roof drift ratio over the pulse periods considered; however, the effect of the increased flexibility due to SFSI is observed in the peak drift ratio and peak base shear response. A couple of chapters of this dissertation are dedicated to the development and verification of a three-dimensional nonlinear cyclic modelling method for non-planar reinforced concrete walls and slabs. This modeling approached - called the beam-truss model (BTM) - consists of (i) nonlinear Euler-Bernoulli fiber-section beam elements representing the steel and concrete in the vertical and horizontal direction, and (ii) nonlinear trusses representing the concrete in the diagonal directions. The model represents the effects of flexure-shear interaction (FSI) by computing the stress and strains in the horizontal and vertical directions and by considering biaxial effects on the behavior of concrete diagonals. In addition, the BTM explicitly models diagonal compression and tension failures (shear failures) under cyclic or dynamic loading. The BTM is first validated by comparing the experimentally measured and numerically computed response of eight RC walls subjected to static cyclic loading, including two non-planar RC walls under biaxial cyclic loading. Then, the BTM is extended to modeling slabs and validated with a two-bay slab-column specimen. Finally, the BTM is validated by comparing the experimentally measured and numerically computed response and failure mode of a 5-story coupled wall RC building under seismic base excitation. The final chapter presents the 3D response history analysis of two 20-story RC core wall buildings subject to a strong near-fault ground motion record. The 20-story building model includes the RC core wall, post-tensioned slabs, and columns; the core wall and slabs are modeled using the developed BTM while the columns are modeled with fiber-section beam-column elements. The two 20-story RC core wall buildings considered have similar geometry: one is conventionally designed to develop plastic hinging at the base of the core-wall, and the second is designed with a damage resistant structural system that combines two seismic isolation planes. Analysis is conducted using the two horizontal components of the historical TCU52 ground motion recorded 0.7 km from the fault plane of the MW7.6 1999 Chi-chi, Taiwan earthquake. The seismic response and damage of the two buildings is discussed.
Author: Yuan Jie Lu
Publisher:
ISBN:
Category :
Languages : en
Pages : 163
Get Book Here
Book Description
This dissertation approaches the subject of three-dimensional (3D) seismic analysis of reinforced concrete (RC) wall buildings at near-fault sites by first studying two main problems separately: (1) the characterization of base excitation for buildings located at near-fault sites, and (2) modeling the behavior of RC buildings accurately including inelastic behavior and the failure mode. The dissertation culminates with the 3D response history analysis of two 20-story RC core wall buildings models, including the slabs and columns, subject to a strong near-fault ground motion record. First, the presence and characteristics of multiple pulses [with dominant period TP between 0.5 and 12 s] in historical near-fault ground motion records is studied. An iterative method for extracting multiple strong pulses imbedded in a ground motion is presented. The method is used to extract multiple strong velocity pulses from the fault-normal horizontal component of 40 pulse-like ground motion records from 17 historical earthquakes, with magnitudes ranging from MW6.3 to MW7.9, recorded at a distance less than 10 km from the fault rupture with a peak ground velocity greater than 0.6 m / s. The relationships between the dominant period of the extracted pulses, associated amplitudes, and earthquake magnitude are presented, indicating that the amplitude of the strongest pulses with 1.5 s ≤ TP ≤ 5 s, does not depend significantly on the earthquake magnitude. Next, the effect of soil-foundation-structure interaction (SFSI) for a 20-story core wall building with a caisson foundation subject to single pulse motions is investigated using two-dimensional (2D) nonlinear finite-elements and fiber beam-column elements; nonlinear site effects on the free-field motion and structural response is discussed. The nonlinear site effects for free-field motions result in a de-amplification of peak surface acceleration due to soil yielding, and a maximum of 64% amplification of peak acceleration and velocity of at specific pulse periods for deep soils. SFSI, after removing the nonlinear site effect, has a negligible effect on the maximum value of peak roof acceleration and peak roof drift ratio over the pulse periods considered; however, the effect of the increased flexibility due to SFSI is observed in the peak drift ratio and peak base shear response. A couple of chapters of this dissertation are dedicated to the development and verification of a three-dimensional nonlinear cyclic modelling method for non-planar reinforced concrete walls and slabs. This modeling approached - called the beam-truss model (BTM) - consists of (i) nonlinear Euler-Bernoulli fiber-section beam elements representing the steel and concrete in the vertical and horizontal direction, and (ii) nonlinear trusses representing the concrete in the diagonal directions. The model represents the effects of flexure-shear interaction (FSI) by computing the stress and strains in the horizontal and vertical directions and by considering biaxial effects on the behavior of concrete diagonals. In addition, the BTM explicitly models diagonal compression and tension failures (shear failures) under cyclic or dynamic loading. The BTM is first validated by comparing the experimentally measured and numerically computed response of eight RC walls subjected to static cyclic loading, including two non-planar RC walls under biaxial cyclic loading. Then, the BTM is extended to modeling slabs and validated with a two-bay slab-column specimen. Finally, the BTM is validated by comparing the experimentally measured and numerically computed response and failure mode of a 5-story coupled wall RC building under seismic base excitation. The final chapter presents the 3D response history analysis of two 20-story RC core wall buildings subject to a strong near-fault ground motion record. The 20-story building model includes the RC core wall, post-tensioned slabs, and columns; the core wall and slabs are modeled using the developed BTM while the columns are modeled with fiber-section beam-column elements. The two 20-story RC core wall buildings considered have similar geometry: one is conventionally designed to develop plastic hinging at the base of the core-wall, and the second is designed with a damage resistant structural system that combines two seismic isolation planes. Analysis is conducted using the two horizontal components of the historical TCU52 ground motion recorded 0.7 km from the fault plane of the MW7.6 1999 Chi-chi, Taiwan earthquake. The seismic response and damage of the two buildings is discussed.
Author: Vladimir Calugaru
Publisher:
ISBN:
Category :
Languages : en
Pages : 113
Get Book Here
Book Description
This dissertation pursues three main objectives: (1) to investigate the seismic response of tall reinforced concrete core wall buildings, designed following current building codes, subjected to pulse type near-fault ground motion, with special focus on the relation between the characteristics of the ground motion and the higher-modes of response; (2) to determine the characteristics of a base isolation system that results in nominally elastic response of the superstructure of a tall reinforced concrete core wall building at the maximum considered earthquake level of shaking; and (3) to demonstrate that the seismic performance, cost, and constructability of a base-isolated tall reinforced concrete core wall building can be significantly improved by incorporating a rocking core-wall in the design. First, this dissertation investigates the seismic response of tall cantilever wall buildings subjected to pulse type ground motion, with special focus on the relation between the characteristics of ground motion and the higher-modes of response. Buildings 10, 20, and 40 stories high were designed such that inelastic deformation was concentrated at a single flexural plastic hinge at their base. Using nonlinear response history analysis, the buildings were subjected to near-fault seismic ground motions as well as simple close-form pulses, which represented distinct pulses within the ground motions. Euler-Bernoulli beam models with lumped mass and lumped plasticity were used to model the buildings. The response of the buildings to the close-form pulses fairly matched that of the near-fault records. Subsequently, a parametric study was conducted for the buildings subjected to three types of close-form pulses with a broad range of periods and amplitudes. The results of the parametric study demonstrate the importance of the ratio of the fundamental period of the structure to the period of the pulse to the excitation of higher modes. The study shows that if the modal response spectrum analysis approach is used--considering the first four modes with a uniform yield reduction factor for all modes and with the square root of sum of squares modal combination rule--it significantly underestimates bending moment and shear force responses. A response spectrum analysis method that uses different yield reduction factors for the first and the higher modes is presented. Next, this dissertation investigates numerically the seismic response of six seismically base-isolated (BI) 20-story reinforced concrete buildings and compares their response to that of a fixed-base (FB) building with a similar structural system above ground. Located in Berkeley, California, 2 km from the Hayward fault, the buildings are designed with a core wall that provides most of the lateral force resistance above ground. For the BI buildings, the following are investigated: two isolation systems (both implemented below a three-story basement), isolation periods equal to 4, 5, and 6 s, and two levels of flexural strength of the wall. The first isolation system combines tension-resistant friction pendulum bearings and nonlinear fluid viscous dampers (NFVDs); the second combines low-friction tension-resistant cross-linear bearings, lead-rubber bearings, and NFVDs. The designs of all buildings satisfy ASCE 7-10 requirements, except that one component of horizontal excitation is used in the two-dimensional nonlinear response history analysis. Analysis is performed for a set of ground motions scaled to the design earthquake (DE) and to the maximum considered earthquake (MCE). At both the DE and the MCE, the FB building develops large inelastic deformations and shear forces in the wall and large floor accelerations. At the MCE, four of the BI buildings experience nominally elastic response of the wall, with floor accelerations and shear forces being 0.25 to 0.55 times those experienced by the FB building. The response of the FB and four of the BI buildings to four unscaled historical pulse-like near-fault ground motions is also studied. Finally, this dissertation investigates the seismic response of four 20-story buildings hypothetically located in the San Francisco Bay Area, 0.5 km from the San Andreas fault. One of the four studied buildings is fixed-base (FB), two are base-isolated (BI), and one uses a combination of base isolation and a rocking core wall (BIRW). Above the ground level, a reinforced concrete core wall provides the majority of the lateral force resistance in all four buildings. The FB and BI buildings satisfy requirements of ASCE 7-10. The BI and BIRW buildings use the same isolation system, which combines tension-resistant friction pendulum bearings and nonlinear fluid viscous dampers. The rocking core-wall includes post-tensioning steel, buckling-restrained devices, and at its base is encased in a steel shell to maximize confinement of the concrete core. The total amount of longitudinal steel in the wall of the BIRW building is 0.71 to 0.87 times that used in the BI buildings. Response history two-dimensional analysis is performed, including the vertical components of excitation, for a set of ground motions scaled to the design earthquake and to the maximum considered earthquake (MCE). While the FB building at MCE level of shaking develops inelastic deformations and shear stresses in the wall that may correspond to irreparable damage, the BI and the BIRW buildings experience nominally elastic response of the wall, with floor accelerations and shear forces which are 0.36 to 0.55 times those experienced by the FB building. The response of the four buildings to two historical and two simulated near-fault ground motions is also studied, demonstrating that the BIRW building has the largest deformation capacity at the onset of structural damage.
Author: P. Fajfar
Publisher: CRC Press
ISBN: 1482296667
Category : Architecture
Languages : en
Pages : 316
Get Book Here
Book Description
Forty scientists working in 13 different countries detail in this work the most recent advances in seismic design and performance assessment of reinforced concrete buildings. It is a valuable contribution in the mitigation of natural disasters.
Author: Ahmet Can Tanyeri
Publisher:
ISBN:
Category :
Languages : en
Pages : 217
Get Book Here
Book Description
Past earthquakes have shown examples of unsatisfactory performance of buildings using reinforced concrete structural walls as the primary lateral-force-resisting system. In the 1994 Northridge earthquake, examples can be found where walls possessed too much overstrength, leading to unintended failure of collectors and floor systems, including precast and post-tensioned construction. In the 2010 Maule Chile earthquake, many structural wall buildings sustained severe damage. Although Chilean design standards result in different reinforcement detailing than is common in U.S. walls, the failure patterns raise concerns about how well conventionally reinforced structural walls in U.S. buildings will perform during the next earthquake. Alternative wall design philosophies that offer more predictable response, with better damage control, should be investigated. After the Mw 8.8 Chile earthquake, the 15-story Alto Rio building in Concepción sustained failures near the base, overturned, and came to rest on its side. The collapse of the Alto Rio building was significant because it was designed using the Chilean Building Code NCh433. Of96, which requires the use of ACI 318-95 for design of reinforced concrete structural elements intended to resist design seismic forces. The failure of the Alto Rio building is significant for many reasons. It is the first modern shear wall building of its type to collapse by overturning during an earthquake. The building is studied using forensic data and structural models of the framing system subjected to earthquake shaking. The study identifies the likely failure mechanism and suggests areas for which design and detailing practices could be improved. The capabilities and shortcomings of the analyses to identify details of the failure mechanism are themselves important outcomes of the study. A second study explores the behavior of structural wall buildings using unbonded post-tensioned structural walls. Such walls offer the opportunity to better control yielding mechanisms and promote self-centering behavior. The study focuses on the measured responses of a full-scale, four-story building model tested on the E-Defense shaking table in Japan. The seismic force-resisting system of the test building comprised two post-tensioned (PT) precast frames in one direction and two unbonded PT precast walls in the other direction. The building was designed using the latest code requirements and design recommendations available both in Japan and the U.S., including the ACI ITG-5.2-09. The test building was subjected to several earthquake ground motions, ranging from serviceability level to near collapse. Analytical studies were carried out to test the capability of the structural models to replicate behaviors important to structural engineers, and to assess whether available analysis tools are sufficient to model dynamic behavior that results when a full-scale building is subjected to realistic earthquake ground shaking. Measured response data from such an outstanding test provides an opportunity to fully understand the response characteristics of PT walls and assess the ability of nonlinear analytical models to reproduce important global and local responses, including three-dimensional system interactions, both prior to and after loss of significant lateral strength. Moreover, this study to assess behavior and system interaction of PT walls leads to improvements of the current design ideas and performance expectations. The present study examines both the collapse of the Alto Rio building in Chile and the shaking table tests of the unbonded post-tensioned wall building in Japan. The collapse study suggests areas of improvement in current design and detailing practice. The shaking table study suggests an alternative approach to design of shear walls in buildings. Both studies demonstrate the use of modern structural analysis tools to interpret building responses to earthquake shaking. Taken together, the studies provide added confidence in earthquake simulation capabilities and demonstrate alternatives for designing earthquake-resistant buildings that use structural walls.
Author: Liviu Crainic
Publisher: CRC Press
ISBN: 0415631866
Category : Technology & Engineering
Languages : en
Pages : 266
Get Book Here
Book Description
This book examines and presents essential aspects of the behavior, analysis, design and detailing of reinforced concrete buildings subjected to strong seismic activity. Seismic design is an extremely complex problem that has seen spectacular development in the last decades. The present volume tries to show how the principles and methods of earthquake engineering can be applied to seismic analysis and design of reinforced concrete buildings. The book starts with an up-to-date presentation of fundamental aspects of reinforced concrete behavior quantified through constitutive laws for monotonic and hysteretic loading. Basic concepts of post-elastic analysis like plastic hinge, plastic length, fiber models, and stable and unstable hysteretic behaviour are, accordingly, defined and commented upon. For a deeper understanding of seismic design philosophy and of static and dynamic post-elastic analysis, seismic behavior of different types of reinforced concrete structures (frames, walls) is examined in detail. Next, up-to-date methods for analysis and design are presented. The powerful concept of structural system is defined and systematically used to explain the response to seismic activity, as well as the procedures for analysis and detailing of common building structures. Several case studies are presented. The book is not code-oriented. The structural design codes are subject to constant reevaluation and updating. Rather than presenting code provisions, this book offers a coherent system of notions, concepts and methods, which facilitate understanding and application of any design code. The content of this book is based mainly on the authors’ personal experience which is a combination of their teaching and research activity as well as their work in the private sector as structural designers. The work will serve to help students and researchers, as well as structural designers to better understand the fundamental aspects of behavior and analysis of reinforced concrete structures and accordingly to gain knowledge that will ensure a sound design of buildings.
Author: United States. Department of Defense. Tri-Service Seismic Design Committee
Publisher:
ISBN:
Category : Buildings
Languages : en
Pages : 472
Get Book Here
Book Description
Author: Dietlinde Köber
Publisher: Springer Nature
ISBN: 3030335321
Category : Science
Languages : en
Pages : 440
Get Book Here
Book Description
This book presents state-of-the-art knowledge on problems of the effects of structural irregularities on their seismic response. It also covers specific spatial and rotational seismic loads on these structures. Rapid progress in respective research on irregular structures and unconventional seismic loads requires prompt updates of the state of the art in this area. These problems are of particular interest to both researchers and practitioners because these are non-conservative effects compared with the approach of the traditional seismic design (e.g. Eurocode 8, Uniform Building Code etc.). This book will be of particular interest to researchers, PhD students and engineers dealing with design of structures under seismic excitations.
Author: Srinivasan Chandrasekaran
Publisher: CRC Press
ISBN: 1439809151
Category : Technology & Engineering
Languages : en
Pages : 268
Get Book Here
Book Description
Tools to Safeguard New Buildings and Assess Existing OnesNonlinear analysis methods such as static pushover are globally considered a reliable tool for seismic and structural assessment. But the accuracy of seismic capacity estimates-which can prevent catastrophic loss of life and astronomical damage repair costs-depends on the use of the correct b
Author: Edward L. Wilson
Publisher:
ISBN:
Category : Buildings
Languages : en
Pages :
Get Book Here
Book Description
Author: Seda Mursel
Publisher:
ISBN:
Category :
Languages : en
Pages : 242
Get Book Here
Book Description
This thesis presents a study on the seismic performance of a retrofitted concrete building in Mexico City. The original lateral force resisting system consisted of reinforced concrete (RC) columns supporting waffle slabs along with RC walls located in the elevator core. After having suffered damages during an earthquake in 2017, the building was retrofitted by adding new RC shear walls. The structural response of the retrofitted building was evaluated using nonlinear analytical models. The response and performance of the newly-added RC wall components were studied employing nonlinear truss models and strain-based acceptance criteria. The results of the wall evaluations were compared with those obtained using the ASCE/SEI 41-17 methodology, which involves backbone moment-rotation relations and rotation limits for the plastic hinges of flexure-dominated walls. The results of the truss models were used to adjust the calibration of hinge models for each of the wall components. A three-dimensional nonlinear model of the entire building was developed employing nonlinear frame elements with plastic hinges for the walls. Two different calibrations of the hinge models were considered: the ASCE/SEI 41-17 moment-rotation curves and the adjusted curves derived from nonlinear truss models. The performance of the retrofitted building was, thereafter, evaluated using nonlinear static analysis, and the results obtained with the two hinge calibrations were compared
