Author: M. I. Kurmanov
Publisher:
ISBN:
Category :
Languages : en
Pages : 16
Book Description
Thermal strain hardening of nickel-free structural steels was studied, using steel specimens smelted in a 200-kg open induction furnace. The specimens were homogenized for 10 h at 1180C and reduced to 37 x 37-mm size. Thermal strain hardening was carried out at 850 and 500C. The mechanical properties, austenite concentration in the specimens, and the size of martensite needles in the latter were determined, and the experimental results tabulated. It was found that thermo-mechanical treatment of specimens at 500C with 74 percent degree of deformation yielded steel with a strength limit of 275 kg/sq mm. Best results were obtained when the specimens were tempered at 100C. It is suggested that the observed strengthening effect is due to a decrease in the size of martensite needles in the specimens.
Thermal Strain Hardening of Nickel-free Structural Steels
Author: M. I. Kurmanov
Publisher:
ISBN:
Category :
Languages : en
Pages : 16
Book Description
Thermal strain hardening of nickel-free structural steels was studied, using steel specimens smelted in a 200-kg open induction furnace. The specimens were homogenized for 10 h at 1180C and reduced to 37 x 37-mm size. Thermal strain hardening was carried out at 850 and 500C. The mechanical properties, austenite concentration in the specimens, and the size of martensite needles in the latter were determined, and the experimental results tabulated. It was found that thermo-mechanical treatment of specimens at 500C with 74 percent degree of deformation yielded steel with a strength limit of 275 kg/sq mm. Best results were obtained when the specimens were tempered at 100C. It is suggested that the observed strengthening effect is due to a decrease in the size of martensite needles in the specimens.
Publisher:
ISBN:
Category :
Languages : en
Pages : 16
Book Description
Thermal strain hardening of nickel-free structural steels was studied, using steel specimens smelted in a 200-kg open induction furnace. The specimens were homogenized for 10 h at 1180C and reduced to 37 x 37-mm size. Thermal strain hardening was carried out at 850 and 500C. The mechanical properties, austenite concentration in the specimens, and the size of martensite needles in the latter were determined, and the experimental results tabulated. It was found that thermo-mechanical treatment of specimens at 500C with 74 percent degree of deformation yielded steel with a strength limit of 275 kg/sq mm. Best results were obtained when the specimens were tempered at 100C. It is suggested that the observed strengthening effect is due to a decrease in the size of martensite needles in the specimens.
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 388
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 388
Book Description
Soviet Technology on Thermal-mechanical Treatment of Metals
Author: Joseph G. Dunleavy
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 34
Book Description
Publisher:
ISBN:
Category : Metals
Languages : en
Pages : 34
Book Description
STAR
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 890
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 890
Book Description
U.S. Government Research & Development Reports
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1304
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1304
Book Description
Heat Treatment and Properties of Iron and Steel
Author: Samuel Jacob Rosenberg
Publisher:
ISBN:
Category : Iron
Languages : en
Pages : 52
Book Description
Publisher:
ISBN:
Category : Iron
Languages : en
Pages : 52
Book Description
Consolidated Translation Survey
Author: United States. Central Intelligence Agency. Foreign Documents Division
Publisher:
ISBN:
Category : Translations
Languages : en
Pages : 686
Book Description
Publisher:
ISBN:
Category : Translations
Languages : en
Pages : 686
Book Description
U. S. Government Research and Development Reports
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1340
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1340
Book Description
Handbook of Thermal Process Modeling Steels
Author: Cemil Hakan Gur
Publisher: CRC Press
ISBN: 1420003585
Category : Technology & Engineering
Languages : en
Pages : 754
Book Description
An Emerging Tool for Pioneering Engineers Co-published by the International Federation of Heat Treatment and Surface Engineering.Thermal processing is a highly precise science that does not easily lend itself to improvements through modeling, as the computations required to attain an accurate prediction of the microstructure and properties of work
Publisher: CRC Press
ISBN: 1420003585
Category : Technology & Engineering
Languages : en
Pages : 754
Book Description
An Emerging Tool for Pioneering Engineers Co-published by the International Federation of Heat Treatment and Surface Engineering.Thermal processing is a highly precise science that does not easily lend itself to improvements through modeling, as the computations required to attain an accurate prediction of the microstructure and properties of work
NBS Monograph
Author:
Publisher:
ISBN:
Category : Physics
Languages : en
Pages : 48
Book Description
Publisher:
ISBN:
Category : Physics
Languages : en
Pages : 48
Book Description