Materials for Energy Efficiency and Thermal Comfort in Buildings PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Materials for Energy Efficiency and Thermal Comfort in Buildings PDF full book. Access full book title Materials for Energy Efficiency and Thermal Comfort in Buildings by Matthew R Hall. Download full books in PDF and EPUB format.
Author: Matthew R Hall
Publisher: Elsevier
ISBN: 1845699270
Category : Architecture
Languages : en
Pages : 761
Get Book Here
Book Description
Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. - Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies - Documents the development of advanced materials and sustainable technologies for applications in building design and construction - Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation
Author: Matthew R Hall
Publisher: Elsevier
ISBN: 1845699270
Category : Architecture
Languages : en
Pages : 761
Get Book Here
Book Description
Almost half of the total energy produced in the developed world is inefficiently used to heat, cool, ventilate and control humidity in buildings, to meet the increasingly high thermal comfort levels demanded by occupants. The utilisation of advanced materials and passive technologies in buildings would substantially reduce the energy demand and improve the environmental impact and carbon footprint of building stock worldwide.Materials for energy efficiency and thermal comfort in buildings critically reviews the advanced building materials applicable for improving the built environment. Part one reviews both fundamental building physics and occupant comfort in buildings, from heat and mass transport, hygrothermal behaviour, and ventilation, on to thermal comfort and health and safety requirements.Part two details the development of advanced materials and sustainable technologies for application in buildings, beginning with a review of lifecycle assessment and environmental profiling of materials. The section moves on to review thermal insulation materials, materials for heat and moisture control, and heat energy storage and passive cooling technologies. Part two concludes with coverage of modern methods of construction, roofing design and technology, and benchmarking of façades for optimised building thermal performance.Finally, Part three reviews the application of advanced materials, design and technologies in a range of existing and new building types, including domestic, commercial and high-performance buildings, and buildings in hot and tropical climates.This book is of particular use to, mechanical, electrical and HVAC engineers, architects and low-energy building practitioners worldwide, as well as to academics and researchers in the fields of building physics, civil and building engineering, and materials science. - Explores improving energy efficiency and thermal comfort through material selection and sustainable technologies - Documents the development of advanced materials and sustainable technologies for applications in building design and construction - Examines fundamental building physics and occupant comfort in buildings featuring heat and mass transport, hygrothermal behaviour and ventilation
Author: Paul Tymkow
Publisher: Routledge
ISBN: 1136893660
Category : Architecture
Languages : en
Pages : 376
Get Book Here
Book Description
The role and influence of building services engineers is undergoing rapid change and is pivotal to achieving low-carbon buildings. However, textbooks in the field have largely focused on the detailed technicalities of HVAC systems, often with little wider context. This book addresses that need by embracing a contemporary understanding of energy efficiency imperatives, together with a strategic approach to the key design issues impacting upon carbon performance, in a concise manner. The key conceptual design issues for planning the principal systems that influence energy efficiency are examined in detail. In addition, the following issues are addressed in turn: Background issues for sustainability and the design process Developing a strategic approach to energy-efficient design How to undertake load assessments System comparison and selection Space planning for services Post-occupancy evaluation of completed building services In order to deliver sustainable buildings, a new perspective is needed amongst building and services engineering designers, from the outset of the conceptual design stage and throughout the whole design process. In this book, students and practitioners alike will find the ideal introduction to this new approach.
Author: Paulo Santos
Publisher: Mdpi AG
ISBN: 9783036511757
Category :
Languages : en
Pages : 440
Get Book Here
Book Description
This Special Issue includes 20 contributions from across the world with very interesting and current research topics, such as insulation solutions and CO2 emissions; thermal transmittance of LSF walls; statistics for China's building energy consumption; natural ventilation; thermal behavior of an earthbag building; thermal performance and comfort in a vernacular building; overheating risk under future extreme weather conditions; analytical methods to estimate the thermal transmittance of LSF walls; model simplification on energy and comfort simulation analysis; Trombe wall thermal behavior and energy efficiency of an LSF compartment; new metering hot box for in situ hygrothermal measurement; mechanical and thermal performance of compressed earth blocks; life-cycle assessment of a new house; energy analyses of Serbian buildings with horizontal overhangs; thermal properties of mortar blocks by using recycled glass; prediction of cooling energy consumption building using machine learning techniques; occupants' behavior, climate change, heating, and cooling energy needs of buildings; a new method for establishing a hygrothermally controlled test room; nonintrusive measurements to incorporate the air renovations in dynamic models; and retrofit of existing buildings with aerogel panels.
Author: José Manuel Andújar
Publisher: MDPI
ISBN: 3039287028
Category : Architecture
Languages : en
Pages : 412
Get Book Here
Book Description
Buildings are one of the main causes of the emission of greenhouse gases in the world. Europe alone is responsible for more than 30% of emissions, or about 900 million tons of CO2 per year. Heating and air conditioning are the main cause of greenhouse gas emissions in buildings. Most buildings currently in use were built with poor energy efficiency criteria or, depending on the country and the date of construction, none at all. Therefore, regardless of whether construction regulations are becoming stricter, the real challenge nowadays is the energy rehabilitation of existing buildings. It is currently a priority to reduce (or, ideally, eliminate) the waste of energy in buildings and, at the same time, supply the necessary energy through renewable sources. The first can be achieved by improving the architectural design, construction methods, and materials used, as well as the efficiency of the facilities and systems; the second can be achieved through the integration of renewable energy (wind, solar, geothermal, etc.) in buildings. In any case, regardless of whether the energy used is renewable or not, the efficiency must always be taken into account. The most profitable and clean energy is that which is not consumed.
Author: Umberto Desideri
Publisher: Butterworth-Heinemann
ISBN: 0128128186
Category : Technology & Engineering
Languages : en
Pages : 860
Get Book Here
Book Description
Handbook of Energy Efficiency in Buildings: A Life Cycle Approach offers a comprehensive and in-depth coverage of the subject with a further focus on the Life Cycle. The editors, renowned academics, invited a diverse group of researchers to develop original chapters for the book and managed to well integrate all contributions in a consistent volume. Sections cover the role of the building sector on energy consumption and greenhouse gas emissions, international technical standards, laws and regulations, building energy efficiency and zero energy consumption buildings, the life cycle assessment of buildings, from construction to decommissioning, and other timely topics. The multidisciplinary approach to the subject makes it valuable for researchers and industry based Civil, Construction, and Architectural Engineers. Researchers in related fields as built environment, energy and sustainability at an urban scale will also benefit from the books integrated perspective. - Presents a complete and thorough coverage of energy efficiency in buildings - Provides an integrated approach to all the different elements that impact energy efficiency - Contains coverage of worldwide regulation
Author: United States. Defense Civil Preparedness Agency
Publisher:
ISBN:
Category : Architecture
Languages : en
Pages : 48
Get Book Here
Book Description
Author: Fernando Pacheco-Torgal
Publisher: Woodhead Publishing
ISBN: 0857097725
Category : Technology & Engineering
Languages : en
Pages : 641
Get Book Here
Book Description
Eco-efficient Construction and Building Materials reviews ways of assessing the environmental impact of construction and building materials. Part one discusses the application of life cycle assessment (LCA) methodology to building materials as well as eco-labeling. Part two includes case studies showing the application of LCA methodology to different types of building material, from cement and concrete to wood and adhesives used in building. Part three includes case studies applying LCA methodology to particular structures and components. - Reviews ways of assessing the environmental impact of construction and building materials - Provides a thorough overview, including strengths and shortcomings, of the life cycle assessment (LCA) and eco-labeling of eco-efficient construction and building materials - Includes case studies showing the application of LCA methodology to different types of building material, from cement and concrete to wood and adhesives used in building
Author: Bernard Flaman
Publisher: Getty Publications
ISBN: 1606066978
Category : Architecture
Languages : en
Pages : 194
Get Book Here
Book Description
This timely volume brings together case studies that address the urgent need to manage energy use and improve thermal comfort in modern buildings while preserving their historic significance and character. This collection of ten case studies addresses the issues surrounding the improvement of energy consumption and thermal comfort in modern buildings built between 1928 and 1969 and offers valuable lessons for other structures facing similar issues. These buildings, international in scope and diverse in type, style, and size, range from the Shulman House, a small residence in Los Angeles, to the TD Bank Tower, a skyscraper complex in Toronto, and from the Calouste Gulbenkian Foundation, a cultural venue in Lisbon, to the Van Nelle Factory in Rotterdam, now an office building. Showing ingenuity and sensitivity, the case studies consider improvements to such systems as heating, cooling, lighting, ventilation, and controls. They provide examples that demonstrate best practices in conservation and show ways to reduce carbon footprints, minimize impacts to historic materials and features, and introduce renewable energy sources, in compliance with energy codes and green-building rating systems. The Conserving Modern Heritage series, launched in 2019, is written by architects, engineers, conservators, scholars, and allied professionals. The books in this series provide well-vetted case studies that address the challenges of conserving twentieth-century heritage.
Author:
Publisher:
ISBN:
Category : Architecture and energy conservation
Languages : en
Pages : 12
Get Book Here
Book Description
Author: Ana-Maria Dabija
Publisher: Springer Nature
ISBN: 3030406717
Category : Architecture
Languages : en
Pages : 281
Get Book Here
Book Description
This book is the result of recent research that deals with the built environment and innovative materials, carried out by specialists working in universities and centers of research in different professional fields ─ architecture, engineering, physics ─ and in an area that that spans from the Mediterranean Sea to the Persian Gulf, and from South Eastern Europe to the Middle East. This book takes the necessity of re-shaping the concept of building design in order to transform buildings from large scale energy consumers to energy savers and producers into consideration. The book is organized in two parts: theory and case studies. For the theoretical part, we chose from the wide range of sources that provide energy efficient materials and systems the two that seem to be endless: the sun and vegetation. Their use in building products represents a tool for specialists in the architectural design concept. The case-studies presented analyze different architectural programs, in different climates, from new buildings to rehabilitation approaches and from residential architecture to hospitals and sports arenas; each case emphasizes the interdisciplinarity of the building design activity in order to help readers gain a better understanding of the complex approach needed for energy efficient building design
