Terminal Ballistics Division's Range 14 (R14), Large Caliber, Kinetic Energy Projectile, Terminal Ballistic Testing Facility PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Terminal Ballistics Division's Range 14 (R14), Large Caliber, Kinetic Energy Projectile, Terminal Ballistic Testing Facility PDF full book. Access full book title Terminal Ballistics Division's Range 14 (R14), Large Caliber, Kinetic Energy Projectile, Terminal Ballistic Testing Facility by L. Giglio-Tos. Download full books in PDF and EPUB format.
Author: L. Giglio-Tos
Publisher:
ISBN:
Category :
Languages : en
Pages : 40
Get Book Here
Book Description
Events leading up to the construction of the Terminal Ballistics Division's provisional, large caliber, kinetic energy projectile, terminal ballistic testing facility at Range 14, Spesutie Island, APG are discussed. The facility is described in considerable detail with attention given to: site preparation and range development plan, construction, instrumentation, structural integrity and operational readiness testing; and operational capabilities. (Author).
Author: L. Giglio-Tos
Publisher:
ISBN:
Category :
Languages : en
Pages : 40
Get Book Here
Book Description
Events leading up to the construction of the Terminal Ballistics Division's provisional, large caliber, kinetic energy projectile, terminal ballistic testing facility at Range 14, Spesutie Island, APG are discussed. The facility is described in considerable detail with attention given to: site preparation and range development plan, construction, instrumentation, structural integrity and operational readiness testing; and operational capabilities. (Author).
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 188
Get Book Here
Book Description
Author: John A. Zook
Publisher:
ISBN:
Category :
Languages : en
Pages : 135
Get Book Here
Book Description
The principal mission of the Penetration Mechanics Branch (PMB) of the Terminal Ballistics Division (TBD) of the Ballistic Research Laboratory (BRL). Aberdeen Proving Ground, MD, is research and development leading to improvements in the terminal ballistic performance of kinetic energy (KE) long rod penetrators. This is done by using computer modeling and by experimental tests. In terms of the number of shots fired, the experimental testing is predominantly done at reduced scale using laboratory guns with bore diameters of 20 to 30 mm. The reduced scale penetrators are of simplified geometry compared with their full-scale counterparts. The penetrator is usually a monolithic right-circular-cylinder metal rod with a hemispheric nose made from either tungsten alloy (WA) or depleted uranium (DU). Terminal ballistics is that part of the science of ballistics that relates to the interaction between a projectile (penetrator) and a target. In general, the projectile is the package which flies through the air. The penetrator is the part of the projectile which digs into the target, inflicting damage to the target. The primary measure of the effectiveness of a penetrator attacking a specific target is its ballistic limit velocity. The ballistic limit velocity is the impact speed required to just get through the target placed at the specified angle of obliquity.
Author: American Society for Nondestructive Testing. Conferences
Publisher:
ISBN:
Category : Nondestructive testing
Languages : en
Pages : 608
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1116
Get Book Here
Book Description
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 0
Get Book Here
Book Description
Reported here is the effort to proof-test a newly acquired breech and assembly for the 5O-mm high-pressure powder gun for terminal ballistic testing in the U.S. Army Research Laboratory's (ARL) Range 309A (R309A). The performance of a custom-produced 0.012-inch web 7-perforation M30 propellant in routine use there was modeled by the ARL-developed one dimensional (1-D) interior ballistic code IBHVG2 to select a propelling charge mass (CM) that would produce a pressure of approximately 130 ksi for the purpose of proof-testing the gun. Proof slugs of the appropriate mass, 900 g, were fabricated. The breech end was assembled to a scrap 0.6-m piece of barrel to add mass, mounted in a hastily built fixture, and fired without recoil system at ARL's barricaded Range 18. The priming system and recipe supplied with the Physics Applications Inc. (PAI) breech end was adjusted until a pressure time (P-T) curve with acceptably low-peak negative differential pressures was obtained. This required reducing the propellant In the 0. SO-cal. case used as a primer and putting Benite strands in the spit tube. Following establishment of a suitable priming recipe, the pressure was raised from 50 ksi to 120 ksi in steps, resulting in slight, permanent plastic deformation of the chamber and inducing a favorable state of residual stress (autofrettage). The assembly was nondestructively examined for cracks before and after the proof-test procedure, and no reportable indications were found. This report briefly describes the hardware, the rationale behind the proof-test, the mechanical response of the system, the Interior ballistics, and the results. Extensive instrumentation was used during the tests, and the results are tabulated and plotted.
Author:
Publisher:
ISBN:
Category : Research
Languages : en
Pages : 1010
Get Book Here
Book Description
Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.
Author: Graham F. Silsby
Publisher:
ISBN: 9781423557609
Category : Ordnance testing
Languages : en
Pages : 67
Get Book Here
Book Description
Reported here is the effort to proof-test a newly acquired breech and assembly for the 5O-mm high-pressure powder gun for terminal ballistic testing in the U.S. Army Research Laboratory's (ARL) Range 309A (R309A). The performance of a custom-produced 0.012-inch web 7-perforation M30 propellant in routine use there was modeled by the ARL-developed one dimensional (1-D) interior ballistic code IBHVG2 to select a propelling charge mass (CM) that would produce a pressure of approximately 130 ksi for the purpose of proof-testing the gun. Proof slugs of the appropriate mass, 900 g, were fabricated. The breech end was assembled to a scrap 0.6-m piece of barrel to add mass, mounted in a hastily built fixture, and fired without recoil system at ARL's barricaded Range 18. The priming system and recipe supplied with the Physics Applications Inc. (PAI) breech end was adjusted until a pressure time (P-T) curve with acceptably low- peak negative differential pressures was obtained. This required reducing the propellant In the 0.SO-cal. case used as a primer and putting Benite strands in the spit tube. Following establishment of a suitable priming recipe, the pressure was raised from 50 ksi to 120 ksi in steps, resulting in slight, permanent plastic deformation of the chamber and inducing a favorable state of residual stress (autofrettage). The assembly was nondestructively examined for cracks before and after the proof-test procedure, and no reportable indications were found. This report briefly describes the hardware, the rationale behind the proof-test, the mechanical response of the system, the Interior ballistics, and the results. Extensive instrumentation was used during the tests, and the results are tabulated and plotted.
Author: Department of the Army
Publisher:
ISBN: 9781975605674
Category :
Languages : en
Pages : 664
Get Book Here
Book Description
Training Circular (TC) 3-09.81, "Field Artillery Manual Cannon Gunnery," sets forth the doctrine pertaining to the employment of artillery fires. It explains all aspects of the manual cannon gunnery problem and presents a practical application of the science of ballistics. It includes step-by-step instructions for manually solving the gunnery problem which can be applied within the framework of decisive action or unified land operations. It is applicable to any Army personnel at the battalion or battery responsible to delivered field artillery fires. The principal audience for ATP 3-09.42 is all members of the Profession of Arms. This includes field artillery Soldiers and combined arms chain of command field and company grade officers, middle-grade and senior noncommissioned officers (NCO), and battalion and squadron command groups and staffs. This manual also provides guidance for division and corps leaders and staffs in training for and employment of the BCT in decisive action. This publication may also be used by other Army organizations to assist in their planning for support of battalions. This manual builds on the collective knowledge and experience gained through recent operations, numerous exercises, and the deliberate process of informed reasoning. It is rooted in time-tested principles and fundamentals, while accommodating new technologies and diverse threats to national security.
Author: Leland Ness
Publisher: Ihs Global Incorporated
ISBN: 9780710628381
Category : History
Languages : en
Pages : 0
Get Book Here
Book Description
The reference guide for ammunition in service, in stock and under development with product development analysis and history, plus technical descriptions, specifications and images. Also manufacturers' details and expert tables to aid small arms identification
