Author: National Research Council
Publisher: National Academies Press
ISBN: 0309022339
Category : Technology & Engineering
Languages : en
Pages : 53
Book Description
Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.
Expansion Joints in Buildings
Author: National Research Council
Publisher: National Academies Press
ISBN: 0309022339
Category : Technology & Engineering
Languages : en
Pages : 53
Book Description
Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.
Publisher: National Academies Press
ISBN: 0309022339
Category : Technology & Engineering
Languages : en
Pages : 53
Book Description
Many factors affect the amount of temperature-induced movement that occurs in a building and the extent to which this movement can occur before serious damage develops or extensive maintenance is required. In some cases joints are being omitted where they are needed, creating a risk of structural failures or causing unnecessary operations and maintenance costs. In other cases, expansion joints are being used where they are not required, increasing the initial cost of construction and creating space utilization problems. As of 1974, there were no nationally acceptable procedures for precise determination of the size and the location of expansion joints in buildings. Most designers and federal construction agencies individually adopted and developed guidelines based on experience and rough calculations leading to significant differences in the various guidelines used for locating and sizing expansion joints. In response to this complex problem, Expansion Joints in Buildings: Technical Report No. 65 provides federal agencies with practical procedures for evaluating the need for through-building expansion joints in structural framing systems. The report offers guidelines and criteria to standardize the practice of expansion joints in buildings and decrease problems associated with the misuse of expansions joints. Expansions Joints in Buildings: Technical Report No. 65 also makes notable recommendations concerning expansion, isolation, joints, and the manner in which they permit separate segments of the structural frame to expand and to contract in response to temperature fluctuations without adversely affecting the buildings structural integrity or serviceability.
How to Write Technical Reports
Author: Lutz Hering
Publisher: Springer Science & Business Media
ISBN: 3540699295
Category : Technology & Engineering
Languages : en
Pages : 307
Book Description
Technical Reports are usually written according to general standards, corporate - sign standards of the current university or company, logical rules and practical - periences. These rules are not known well enough among engineers. There are many books that give general advice in writing. This book is specialised in how to write Technical Reports and addresses not only engineers, but also natural sci- th tists, computer scientists, etc. It is based on the 6 edition published in 2008 by st Vieweg in German and is now published as 1 edition by Springer in English. Both authors of the German edition have long experience in educating en- neers at the University of Applied Sciences Hannover. They have held many l- tures where students had to write reports and took notes about all positive and negative examples that occurred in design reports, lab work reports, and in theses. Prof. Dr. Lutz Hering has worked for VOLKSWAGEN and DAIMLER and then changed to the University of Applied Sciences Hannover where he worked from 1974 until 2000. He held lectures on Technical Drawing, Construction and Design, CAD and Materials Science. Dr. Heike Hering worked nine years as a Technical Writer and was responsible for many CAD manuals in German and English. She is now employed at TÜV NORD Akademie, where she is responsible for E-Learning projects, technical documentation and software training and supervises students who are writing their theses. Prof. Dr. -Ing.
Publisher: Springer Science & Business Media
ISBN: 3540699295
Category : Technology & Engineering
Languages : en
Pages : 307
Book Description
Technical Reports are usually written according to general standards, corporate - sign standards of the current university or company, logical rules and practical - periences. These rules are not known well enough among engineers. There are many books that give general advice in writing. This book is specialised in how to write Technical Reports and addresses not only engineers, but also natural sci- th tists, computer scientists, etc. It is based on the 6 edition published in 2008 by st Vieweg in German and is now published as 1 edition by Springer in English. Both authors of the German edition have long experience in educating en- neers at the University of Applied Sciences Hannover. They have held many l- tures where students had to write reports and took notes about all positive and negative examples that occurred in design reports, lab work reports, and in theses. Prof. Dr. Lutz Hering has worked for VOLKSWAGEN and DAIMLER and then changed to the University of Applied Sciences Hannover where he worked from 1974 until 2000. He held lectures on Technical Drawing, Construction and Design, CAD and Materials Science. Dr. Heike Hering worked nine years as a Technical Writer and was responsible for many CAD manuals in German and English. She is now employed at TÜV NORD Akademie, where she is responsible for E-Learning projects, technical documentation and software training and supervises students who are writing their theses. Prof. Dr. -Ing.
Technical Report
Author:
Publisher:
ISBN:
Category : Flood control
Languages : en
Pages : 456
Book Description
Publisher:
ISBN:
Category : Flood control
Languages : en
Pages : 456
Book Description
Automated Design and Construction Progress Reporting Procedures
Author: Roger L. Lapp
Publisher:
ISBN:
Category : Military engineering
Languages : en
Pages : 72
Book Description
Publisher:
ISBN:
Category : Military engineering
Languages : en
Pages : 72
Book Description
Technical Report 13
Author:
Publisher:
ISBN: 9781935117483
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN: 9781935117483
Category :
Languages : en
Pages :
Book Description
Laboratory Design, Construction, and Renovation
Author: National Research Council
Publisher: National Academies Press
ISBN: 0309132770
Category : Technology & Engineering
Languages : en
Pages : 176
Book Description
Laboratory facilities are complex, technically sophisticated, and mechanically intensive structures that are expensive to build and to maintain. Hundreds of decisions must be made before and during new construction or renovation that will determine how successfully the facility will function when completed and how successfully it can be maintained once put into service. This book provides guidance on effective approaches for building laboratory facilities in the chemical and biochemical sciences. It contains both basic and laboratory-specific information addressed to the user communityâ€"the scientists and administrators who contract with design and construction experts. The book will also be important to the design and construction communitiesâ€"the architects, laboratory designers, and engineers who will design the facility and the construction personnel who will build itâ€"to help them communicate with the scientific community for whom they build laboratory facilities.
Publisher: National Academies Press
ISBN: 0309132770
Category : Technology & Engineering
Languages : en
Pages : 176
Book Description
Laboratory facilities are complex, technically sophisticated, and mechanically intensive structures that are expensive to build and to maintain. Hundreds of decisions must be made before and during new construction or renovation that will determine how successfully the facility will function when completed and how successfully it can be maintained once put into service. This book provides guidance on effective approaches for building laboratory facilities in the chemical and biochemical sciences. It contains both basic and laboratory-specific information addressed to the user communityâ€"the scientists and administrators who contract with design and construction experts. The book will also be important to the design and construction communitiesâ€"the architects, laboratory designers, and engineers who will design the facility and the construction personnel who will build itâ€"to help them communicate with the scientific community for whom they build laboratory facilities.
Technical Report 13 (2021 Revision)
Author:
Publisher:
ISBN: 9781935117919
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN: 9781935117919
Category :
Languages : en
Pages :
Book Description
Review of Soils Design, Construction, and Performance Observations, Harlan County Dam, Nebraska
Author: U.S. Army Engineer Waterways Experiment Station
Publisher:
ISBN:
Category : Earth dams
Languages : en
Pages : 68
Book Description
Publisher:
ISBN:
Category : Earth dams
Languages : en
Pages : 68
Book Description
Design and Construction of Concrete Floors, Second Edition
Author: George Garber
Publisher: Elsevier
ISBN: 0750666560
Category : Architecture
Languages : en
Pages : 393
Book Description
Concrete floors still form one of the most common structural elements in construction today. This book provides an introductory guide to the design and construction of concrete floors. It is aimed at designers, civil and structural engineers, contractors and engineering and architectural consultants.
Publisher: Elsevier
ISBN: 0750666560
Category : Architecture
Languages : en
Pages : 393
Book Description
Concrete floors still form one of the most common structural elements in construction today. This book provides an introductory guide to the design and construction of concrete floors. It is aimed at designers, civil and structural engineers, contractors and engineering and architectural consultants.
Proceedings
Author: American Society of Civil Engineers
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 1782
Book Description
Publisher:
ISBN:
Category : Civil engineering
Languages : en
Pages : 1782
Book Description