Author: Dawoud Shenouda Dawoud
Publisher: CRC Press
ISBN: 1000796914
Category : Science
Languages : en
Pages : 393
Get Book Here
Book Description
Data communication standards are comprised of two components: The “protocol” and “Signal/data/port specifications for the devices involved”. The protocol describes the format of the message and the meaning of each part of the message. To connect any device to the bus, an external device must be used as an interface which will put the message in a form which fulfills all the electrical specifications of the port. These specifications are called the “Standard”. The most famous such serial communication standard is the RS-232. In IT technology, Communication can be serial or parallel. Serial communication is used for transmitting data over long distances. It is much cheaper to run the single core cable needed for serial communication over a long distance than the multicore cables that would be needed for parallel communication. It is the same in wireless communication: Serial communication needs one channel while parallel needs multichannel. Serial Communication can also be classified in many other ways, for example synchronous and asynchronous; it can also be classified as simplex, duplex and half duplex. Because of the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. These have been developed over recent decades and range from the simple to the highly complicated. This large number of protocols was necessary to guarantee the optimum performance for the targeted applications. It is important for communication engineers to have enough knowledge to match the right protocol and standard with the right application. The main aim of this book is to provide the reader with that knowledge The book also provides the reader with detailed information about:- Serial Communication- Universal Asynchronous Receiver Transmitter (UART)- Universal Synchronous/Asynchronous Receiver Transmitter (USART - Serial Peripheral Interface (SPI) - eSPI- Universal Serial Bus (USB)- Wi-Fi- WiMax- Insteon The details of each technology including specification, operation, security related matters, and many other topics are covered. The book allocates three chapters to the main communication standards. These chapters cover everything related to the most famous standard RS-232 and all its variants. Other protocols such as: I2C, CAN, ZigBee, Z-Wave, Bluetooth, and others, are the subject of the authors separate book “Microcontroller and Smart Home Networks”.
Author: Dawoud Shenouda Dawoud
Publisher:
ISBN: 9788770221542
Category : Serial communications
Languages : en
Pages : 0
Get Book Here
Book Description
Due to the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. The main aim of the book is to provide communication engineers enough knowledge to match the right protocol and standard with the right application.
Author: Louis E. Frenzel
Publisher: Newnes
ISBN: 0128006714
Category : Technology & Engineering
Languages : en
Pages : 338
Get Book Here
Book Description
This book catalogs the most popular and commonly used serial-port interfaces and provides details on the specifications and the latest standards, enabling you to select an interface for a new design or verify that an interface is working correctly. Each chapter is based on a different interface and is written in an easy to follow, standard format. With this book you will learn: - The most widely used serial interfaces - How to select the best serial interface for a specific application or design - The trade-offs between data rate and distance (length or range) - The operation and benefits of serial data transmission - The most common media used for serial data transmission - Covers the most popular and commonly used interfaces and provides details on their specifications and standards - Explains the key concepts to enable an engineer to select an interface for a new design or verify that an interface is working correctly - Each chapter is based on a different interface and is written in an easy to follow, standard format
Author: Dawoud Shenouda Dawoud
Publisher:
ISBN: 9788770043335
Category : Science
Languages : en
Pages : 0
Get Book Here
Book Description
This book gives detailed comparisons between the various protocols. To complete the knowledge of the reader, the book gives in the last chapter a short summary on the protocols that we did not fully cover in this volume: Ethernet, Thread, Insteon, X10 and UPB.
Author: Cisco Networking Academy
Publisher: Pearson Education
ISBN: 1587133326
Category : Computers
Languages : en
Pages : 569
Get Book Here
Book Description
"This course discusses the WAN technologies and network services required by converged applications in a complex network. The course allows you to understand the selection criteria of network devices and WAN technologies to meet network requirements. You will learn how to configure and troubleshoot network devices and resolve common issues with data link protocols. You will also develop the knowledge and skills needed to implement IPSec and virtual private network (VPN) operations in a complex network."--Back cover.
Author: Dawoud Shenouda Dawoud
Publisher: CRC Press
ISBN: 1000793753
Category : Science
Languages : en
Pages : 533
Get Book Here
Book Description
Data communication standards are comprised of two components: The “protocol” and “Signal/data/port specifications for the devices involved”. The protocol describes the format of the message and the meaning of each part of the message. To connect any device to the bus, an external device must be used as an interface which will put the message in a form which fulfills all the electrical specifications of the port. These specifications are called the “Standard”. The most famous such serial communication standard is the RS-232. In IT technology, Communication can be serial or parallel. Serial communication is used for transmitting data over long distances. It is much cheaper to run the single core cable needed for serial communication over a long distance than the multicore cables that would be needed for parallel communication. It is the same in wireless communication: Serial communication needs one channel while parallel needs multichannel. Serial Communication can also be classified in many other ways, for example synchronous and asynchronous; it can also be classified as simplex, duplex and half duplex. Because of the wide spread of serial communication from home automation to sensor and controller networks, there is a need for a very large number of serial communication standards and protocols. These have been developed over recent decades and range from the simple to the highly complicated. This large number of protocols was necessary to guarantee the optimum performance for the targeted applications. It is important for communication engineers to have enough knowledge to match the right protocol and standard with the right application. The main aim of this book is to provide the reader with that knowledge The book also provides the reader with detailed information about:- Serial Communication- Universal Asynchronous Receiver Transmitter (UART)- Universal Synchronous/Asynchronous Receiver Transmitter (USART - Serial Peripheral Interface (SPI) - eSPI- Universal Serial Bus (USB)- Wi-Fi- WiMax- Insteon The details of each technology including specification, operation, security related matters, and many other topics are covered. The book allocates three chapters to the main communication standards. These chapters cover everything related to the most famous standard RS-232 and all its variants. Other protocols such as: I2C, CAN, ZigBee, Z-Wave, Bluetooth, and others, are the subject of the authors separate book “Microcontroller and Smart Home Networks”.
Author: John Park
Publisher: Newnes
ISBN: 9780750657976
Category : Business & Economics
Languages : en
Pages : 412
Get Book Here
Book Description
Overview of Data Communications; Basic Data Communication Principles; Physical Serial Communication Standards; Error Detection; Cabling Basics; Electrical Noise and Interference; Modems and Multiplexers; Introduction to Protocols; Open Systems Interconnection Model; Industrial Protocols; HART Protocol; Open Industrial Fieldbus and DeviceNet Systems; Local Area Networks; Appendix A: Numbering Systems; Appendix B: Cyclic Redundancy Check (CRC) Program Listing; Appendix C: Serial Link Design; Glossary.
Author: Eric D. Knapp
Publisher: Syngress
ISBN: 0124201849
Category : Computers
Languages : en
Pages : 460
Get Book Here
Book Description
As the sophistication of cyber-attacks increases, understanding how to defend critical infrastructure systems—energy production, water, gas, and other vital systems—becomes more important, and heavily mandated. Industrial Network Security, Second Edition arms you with the knowledge you need to understand the vulnerabilities of these distributed supervisory and control systems. The book examines the unique protocols and applications that are the foundation of industrial control systems, and provides clear guidelines for their protection. This how-to guide gives you thorough understanding of the unique challenges facing critical infrastructures, new guidelines and security measures for critical infrastructure protection, knowledge of new and evolving security tools, and pointers on SCADA protocols and security implementation. - All-new real-world examples of attacks against control systems, and more diagrams of systems - Expanded coverage of protocols such as 61850, Ethernet/IP, CIP, ISA-99, and the evolution to IEC62443 - Expanded coverage of Smart Grid security - New coverage of signature-based detection, exploit-based vs. vulnerability-based detection, and signature reverse engineering
Author: Drago Hercog
Publisher: Springer Nature
ISBN: 3030504050
Category : Computers
Languages : en
Pages : 382
Get Book Here
Book Description
This book provides comprehensive coverage of the protocols of communication systems. The book is divided into four parts. Part I covers the basic concepts of system and protocol design and specification, overviews the models and languages for informal and formal specification of protocols, and describes the specification language SDL. In the second part, the basic notions and properties of communication protocols and protocol stacks are explained, including the treatment of the logical correctness and the performance of protocols. In the third part, many methods for message transfer, on which specific communication protocols are based, are explained and formally specified in the SDL language. The fourth part provides for short descriptions of some specific protocols, mainly used in IP networks, in order to acquaint a reader with the practical use of communication methods presented in the third part of the book. The book is relevant to researchers, academics, professionals and students in communications engineering. Provides comprehensive yet granular coverage of the protocols of communication systems Allows readers the ability to understand the formal specification of communication protocols Specifies communication methods and protocols in the specification language SDL, giving readers practical tools to venture on their own
Author: Manuel Jiménez
Publisher: Springer Science & Business Media
ISBN: 1461431433
Category : Technology & Engineering
Languages : en
Pages : 660
Get Book Here
Book Description
This textbook serves as an introduction to the subject of embedded systems design, using microcontrollers as core components. It develops concepts from the ground up, covering the development of embedded systems technology, architectural and organizational aspects of controllers and systems, processor models, and peripheral devices. Since microprocessor-based embedded systems tightly blend hardware and software components in a single application, the book also introduces the subjects of data representation formats, data operations, and programming styles. The practical component of the book is tailored around the architecture of a widely used Texas Instrument’s microcontroller, the MSP430 and a companion web site offers for download an experimenter’s kit and lab manual, along with Powerpoint slides and solutions for instructors.
