Author: Publisher:
ISBN:
Category : Buildings
Languages : en
Pages : 266
Book Description
Safe Rooms and Shelters
Author: Safe Rooms and Shelters
Author: Federal Emergency Management AgencyPublisher: Skyhorse
ISBN: 9781510750845
Category : Reference
Languages : en
Pages : 0
Book Description
Guidance for Property Owners, Engineers, Architects, and Building Officials to Design Shelters and Safe Rooms in Homes and Public Buildings This manual presents information about the design and construction of shelters in the workplace, home, or community building that will provide protection in response to manmade hazards. Because the security needs and types of construction vary greatly, users may select the methods and measures that best meet their individual situations. The use of experts to apply the methodologies contained in this document is encouraged. This document will discuss the design of shelters to protect against Chemical, Biological, Radiological and Explosive (CBRE) attacks. Fallout shelters that are designed to protect against the effects of a nuclear weapon attack are not addressed in this publication. The risks of death or injury from CBRE attacks are not evenly distributed throughout the United States. This manual will guide the reader through the process of designing a shelter to protect against CBRE attacks. The intent of this manual is not to mandate the construction of shelters for CBRE events, but rather to provide design guidance for persons who wish to design and build such shelters. The design and planning necessary for extremely high-capacity shelters that may be required for large, public venues, such as stadiums or amphitheaters, are beyond the scope of this design manual. An owner or operator of such a venue may be guided by concepts presented in this document, but detailed guidance concerning extremely high-capacity shelters is not provided. The design of such shelters requires attention to issues such as egress and life safety for a number of people that are orders of magnitude greater than those proposed for a shelter designed in accordance with the guidance provided herein. The intent of this manual is not to override or replace current codes and standards, but rather to provide important guidance of best practices (based on current technologies and scientific research) where none has been available. No known building, fire, life safety code, or engineering standard has previously attempted to provide detailed information, guidance, and recommendations concerning the design of CBRE shelters for protection of the general public. Therefore, the information provided herein is the best available at the time this manual was published. Designing and constructing a shelter according to the criteria in this manual does not mean that the shelter will be capable of withstanding every possible event. The design professional who ultimately designs a shelter should state the limiting assumptions and shelter design parameters on the project documents.
Safe Rooms and Shelters
Author: Publisher: Government Printing Office
ISBN: 9780160833694
Category : Business & Economics
Languages : en
Pages : 264
Book Description
NOTE: NO FURTHER DISCOUNT FOR THIS PRINT PRODUCT -- OVERSTOCK SALE -- Significantly reduced list price while supplies last This manual is intended to provide guidance for engineers, architects, building officials, building and home inspectors, and property owners to design shelters and safe rooms n buildings. It presents informaton about the design and construction of shelters in the work place, home, or community building that will provide protection in response to manmade hazards. Included is information to: assist in planning and design of shelters that may be constructed outside or within dwellings or public buildings. designed to protect individuals from assaults and attempted kidnapping, which requires design featurs to resist forced entry and ballistic impact Protective options, from low-cost expedient protection, such as sheltering-in-place to safe rooms ventilated and pressurized with purified air by ultra-high- efficiency filters. and more. Related products: Taking Shelter From the Storm: Building a Safe Room for Your Home or Small Business; Includes Construction Plans (CD) can be found here: https: //bookstore.gpo.gov/products/sku/064-000-00069-1?ctid=138 A Study of Active Shooter Incidents in the United States Between 2000 and 2013 can be found here: https: //bookstore.gpo.gov/products/sku/027-001-00101-3 Incremental Protection for Existing Commercial Buildings From Terrorist Attack: Providing Protection to People and Buildings can be found here: https: //bookstore.gpo.gov/products/sku/064-000-00043-8 Reference Manual to Mitigate Potential Terrorist Attacks Against Buildings: Providing Protection to People and Buildings is available here: https: //bookstore.gpo.gov/products/sku/064-000-00038-1 World Trade Center Building Performance Study: Data Collection, Preliminary Observations, and Recommendations is available here: https: //bookstore.gpo.gov/products/sku/064-000-00029-2 Other products produced by U.S. Federal Emergency Management Agency (FEMA) can be found here: https: //bookstore.gpo.gov/agency/528
Safe rooms and shelters: Protecting People Against Terrorist Attacks
Author: Publisher: Government Printing Office
ISBN: 9780160876561
Category : Business & Economics
Languages : en
Pages : 268
Book Description
NOTE: NO FURTHER DISCOUNT FOR THIS PRINT PRODUCT -- OVERSTOCK SALE -- Significantly reduced list price while supplies last This manual is intended to provide guidance for engineers, architects, building officials, building and home inspectors, and property owners to design shelters and safe rooms n buildings. It presents informaton about the design and construction of shelters in the work place, home, or community building that will provide protection in response to manmade hazards. Included is information to: assist in planning and design of shelters that may be constructed outside or within dwellings or public buildings. designed to protect individuals from assaults and attempted kidnapping, which requires design featurs to resist forced entry and ballistic impact Protective options, from low-cost expedient protection, such as sheltering-in-place to safe rooms ventilated and pressurized with purified air by ultra-high- efficiency filters. and more. Related products: Taking Shelter From the Storm: Building a Safe Room for Your Home or Small Business; Includes Construction Plans (CD) can be found here: https: //bookstore.gpo.gov/products/sku/064-000-00069-1?ctid=138 A Study of Active Shooter Incidents in the United States Between 2000 and 2013 can be found here: https: //bookstore.gpo.gov/products/sku/027-001-00101-3 Incremental Protection for Existing Commercial Buildings From Terrorist Attack: Providing Protection to People and Buildings can be found here: https: //bookstore.gpo.gov/products/sku/064-000-00043-8 Reference Manual to Mitigate Potential Terrorist Attacks Against Buildings: Providing Protection to People and Buildings is available here: https: //bookstore.gpo.gov/products/sku/064-000-00038-1 World Trade Center Building Performance Study: Data Collection, Preliminary Observations, and Recommendations is available here: https: //bookstore.gpo.gov/products/sku/064-000-00029-2 Other products produced by U.S. Federal Emergency Management Agency (FEMA) can be found here: https: //bookstore.gpo.gov/agency/528
Risk Management Series: Safe Rooms and Shelters - Protecting People Agains Terrorist Attacks
Author: Federal Emergency AgencyPublisher: FEMA
ISBN:
Category :
Languages : en
Pages : 264
Book Description
This manual is intended to provide guidance for engineers, architects, building officials, and property owners to design shelters and safe rooms in buildings. It presents information about the design and construction of shelters in the work place, home, or community building that will provide protection in response to manmade hazards. The information contained herein will assist in the planning and design of shelters that may be constructed outside or within dwellings or public buildings. These safe rooms will protect occupants from a variety of hazards, including debris impact, accidental or intentional explosive detonation, and the accidental or intentional release of a toxic substance into the air. Safe rooms may also be designed to protect individuals from assaults and attempted kidnapping, which requires design features to resist forced entry and ballistic impact. This covers a range of protective options, from low-cost expedient protection (what is commonly referred to as sheltering-in-place) to safe rooms ventilated and pressurized with air purified by ultra-high-efficiency filters. These safe rooms protect against toxic gases, vapors, and aerosols. The contents of this manual supplement the information provided in FEMA 361, Design and Construction Guidance for Community Shelters and FEMA 320, Taking Shelter From the Storm: Building a Safe Room Inside Your House. In conjunction with FEMA 361 and FEMA 320, this publication can be used for the protection of shelters against natural disasters. This guidance focuses on safe rooms as standby systems, ones that do not provide protection on a continuous basis. To employ a standby system requires warning based on knowledge that a hazardous condition exists or is imminent. Protection is initiated as a result of warnings from civil authorities about a release of hazardous materials, visible or audible indications of a release (e.g., explosion or fire), the odor of a chemical agent, or observed symptoms of exposure in people. Although there are automatic detectors for chemical agents, such detectors are expensive and limited in the number of agents that can be reliably detected. Furthermore, at this point in time, these detectors take too long to identify the agent to be useful in making decisions in response to an attack. Similarly, an explosive vehicle or suicide bomber attack rarely provides advance warning; therefore, the shelter is most likely to be used after the fact to protect occupants until it is safe to evacuate the building. Two different types of shelters may be considered for emergency use, standalone shelters and internal shelters. A standalone shelter is a separate building (i.e., not within or attached to any other building) that is designed and constructed to withstand the range of natural and manmade hazards. An internal shelter is a specially designed and constructed room or area within or attached to a larger building that is structurally independent of the larger building and is able to withstand the range of natural and manmade hazards. Both standalone and internal shelters are intended to provide emergency refuge for occupants of commercial office buildings, school buildings, hospitals, apartment buildings, and private homes from the hazards resulting from a wide variety of extreme events. The shelters may be used during natural disasters following the warning that an explosive device may be activated, the discovery of an explosive device, or until safe evacuation is established following the detonation of an explosive device or the release of a toxic substance via an intentional aerosol attack or an industrial accident. Standalone community shelters may be constructed in neighborhoods where existing homes lack shelters. Community shelters may be intended for use by the occupants of buildings they are constructed within or near, or they may be intended for use by the residents of surrounding or nearby neighborhoods or designated areas.
FEMA Publications Catalog
Author: Federal Emergency Management AgencyPublisher: FEMA
ISBN:
Category : United States
Languages : en
Pages : 48
Book Description
Handbook of Loss Prevention and Crime Prevention
Author: Lawrence FennellyPublisher: Elsevier
ISBN: 0123852498
Category : Social Science
Languages : en
Pages : 632
Book Description
The Handbook of Loss Prevention and Crime Prevention, 5e, is a trusted resource for physical security professionals, students, and candidates for the coveted Certified Protection Professional (CPP) certification administered by ASIS International. The U.S. government recently announced that employees will have to obtain CPP certification to advance in their careers. Edited by the security practitioner and author Lawrence Fennelly, this handbook gathers in a single volume the key information on each topic from eminent subject-matter experts. Taken together, this material offers a range of approaches for defining security problems and tools for designing solutions in a world increasingly characterized by complexity and chaos. The 5e adds cutting-edge content and up-to-the-minute practical examples of its application to problems from retail crime to disaster readiness. Covers every important topic in the field, including the latest on wireless security applications, data analysis and visualization, situational crime prevention, and global security standards and compliance issues Required reading for the certification DHS selected for its infrastructure security professionals Each chapter is contributed by a top security professional with subject-matter expertise
Official (ISC)2 Guide to the CISSP CBK
Author: Adam GordonPublisher: CRC Press
ISBN: 1498759882
Category : Computers
Languages : en
Pages : 1714
Book Description
As a result of a rigorous, methodical process that (ISC) follows to routinely update its credential exams, it has announced that enhancements will be made to both the Certified Information Systems Security Professional (CISSP) credential, beginning April 15, 2015. (ISC) conducts this process on a regular basis to ensure that the examinations and
Effective Physical Security
Author: Lawrence J. FennellyPublisher: Butterworth-Heinemann
ISBN: 0124159818
Category : Social Science
Languages : en
Pages : 379
Book Description
Effective Physical Security, Fourth Edition is a best-practices compendium that details the essential elements to physical security protection. The book contains completely updated sections that have been carefully selected from the authors’ work that set the standard: Handbook of Loss Prevention and Crime Prevention, Fifth Edition. Designed for easy reference, Effective Physical Security contains important coverage of environmental design, security surveys, locks, lighting, and CCTV as well as new chapters covering the latest in the ISO standards for Risk Assessment and Risk Management, physical security planning, network systems infrastructure, and environmental design. This new edition continues to serve as a valuable reference for experienced security practitioners as well as students in undergraduate and graduate security programs. Required reading for the ASIS Physical Security Professional Certification (PSP) and recommended reading for the CPP certification Provides detailed coverage of Physical Security in an easily accessible reference format with content divided into three major parts: Design, Equipment, and Operations Each chapter is written by a recognized expert security specialist
Handbook for Blast Resistant Design of Buildings
Author: Donald O. DusenberryPublisher: John Wiley & Sons
ISBN: 0470170549
Category : Technology & Engineering
Languages : en
Pages : 513
Book Description
Unique single reference supports functional and cost-efficient designs of blast resistant buildings Now there's a single reference to which architects, designers, and engineers can turn for guidance on all the key elements of the design of blast resistant buildings that satisfy the new ASCE Standard for Blast Protection of Buildings as well as other ASCE, ACI, and AISC codes. The Handbook for Blast Resistant Design of Buildings features contributions from some of the most knowledgeable and experienced consultants and researchers in blast resistant design. This handbook is organized into four parts: Part 1, Design Considerations, sets forth basic principles, examining general considerations in the design process; risk analysis and reduction; criteria for acceptable performance; materials performance under the extraordinary blast environment; and performance verification for technologies and solution methodologies. Part 2, Blast Phenomena and Loading, describes the explosion environment, loading functions needed for blast response analysis, and fragmentation and associated methods for effects analysis. Part 3, System Analysis and Design, explains the analysis and design considerations for structural, building envelope, component space, site perimeter, and building system designs. Part 4, Blast Resistant Detailing, addresses the use of concrete, steel, and masonry in new designs as well as retrofitting existing structures. As the demand for blast resistant buildings continues to grow, readers can turn to the Handbook for Blast Resistant Design of Buildings, a unique single source of information, to support competent, functional, and cost-efficient designs.
