Author:
Publisher: Elmar Janahmadov (SAEQ LTD)
ISBN:
Category : Science
Languages : en
Pages : 30
Book Description
Issue 05 Oct-Nov-Dec 2014
SAEQ Issue 05
Author:
Publisher: Elmar Janahmadov (SAEQ LTD)
ISBN:
Category : Science
Languages : en
Pages : 30
Book Description
Issue 05 Oct-Nov-Dec 2014
Publisher: Elmar Janahmadov (SAEQ LTD)
ISBN:
Category : Science
Languages : en
Pages : 30
Book Description
Issue 05 Oct-Nov-Dec 2014
SAEQ Issue 12
Author:
Publisher: Elmar Janahmadov (SAEQ LTD)
ISBN:
Category : Science
Languages : en
Pages : 27
Book Description
Issue 12 April-May-June 2017
Publisher: Elmar Janahmadov (SAEQ LTD)
ISBN:
Category : Science
Languages : en
Pages : 27
Book Description
Issue 12 April-May-June 2017
SAEQ Issue 07
Author:
Publisher: http://www.saeqltd.com
ISBN:
Category : Science
Languages : en
Pages : 32
Book Description
Issue 07 Jan-Feb-Mar 2016 Assessment Of Irregularities-Bursts And Catastrophic Changes In Compressor Units A.M. Pashayev, A.Kh. Janahmadov, N.G. Javadov, M.Y. Javadov The paper assesses the type of irregularities of type bursts and disastrous wear during operation of the tested CU equipment. Using the flicker-noise spectroscopy (FNS), which is used to estimated the parameters of the singular component of the power spectrum of the signal and find significant changes in the dimensionless parameters of unsteadiness providing an indication of the approaching moments of a catastrophic deterioration of the equipment. Mineral Composition And Textural-Structural Peculiarities Of Ore, And Mineral Formation Stage Of The Gedabey Gold-Copper Deposit (Lesser Caucasus) M. Aliyev, G. Huseynov The mineral composition and textural and structural characteristics of ores are studied, also the phases and stages of mineralization, which are an important source of information on the conditions of formation of the deposit, time allocation of gold and its spatial association with certain mineral assemblages and associations. Consideration of these issues can come to an understanding of the factors behind the differences in the scale and extent of gold deposits of various types, as well as to form a mineralogical search features gold-bearing mineralization. Development Of Decision-Making Algorithm On Efficiency Of Operators And Traffic Controllers Of Air Transport Based On Their Psycho-Physiological Conditions And Productivities R.M. Jafarzade, T.R. Jafarzade By processing the data on the human-operator active performance with respect to their psycho-physiological conditions and productivities in the human-machine systems, we developed the algorithm for the possibilities of further execution of their (operator) duties in the incomplete and unclear initial data. Using fuzzy clustering and the interval fuzzy sets of the second type, and the coordinated assessment of expert opinions on the binary relationship of objects from the class with recommendations on the further implementation of their activities, we obtained the individual assessment of the alternative recommendations for each of the tested objects from the set of objects. The calculation for the experimental data is provided. The proposed approach can be used for the adaptive selection of recommendations on the continuation of duties of air operators and air traffic controllers by taking into account the dynamic of changes of their psycho-physiological states and productivities. Management Of Portfolio Of Securities On The Basis Of Minimization Of The Conditional Expected Losses S.M. Javadova On the basis of a method of empirical averages for the general problem of stochastic programming, convergence of the solution of an approximating task to the solution of a problem of conditional minimization of the expected losses when forming an investment portfolio is proved. Numerical calculations on a concrete example of two joint stock companies are received by means of the program of linear programming in MATLAB system.
Publisher: http://www.saeqltd.com
ISBN:
Category : Science
Languages : en
Pages : 32
Book Description
Issue 07 Jan-Feb-Mar 2016 Assessment Of Irregularities-Bursts And Catastrophic Changes In Compressor Units A.M. Pashayev, A.Kh. Janahmadov, N.G. Javadov, M.Y. Javadov The paper assesses the type of irregularities of type bursts and disastrous wear during operation of the tested CU equipment. Using the flicker-noise spectroscopy (FNS), which is used to estimated the parameters of the singular component of the power spectrum of the signal and find significant changes in the dimensionless parameters of unsteadiness providing an indication of the approaching moments of a catastrophic deterioration of the equipment. Mineral Composition And Textural-Structural Peculiarities Of Ore, And Mineral Formation Stage Of The Gedabey Gold-Copper Deposit (Lesser Caucasus) M. Aliyev, G. Huseynov The mineral composition and textural and structural characteristics of ores are studied, also the phases and stages of mineralization, which are an important source of information on the conditions of formation of the deposit, time allocation of gold and its spatial association with certain mineral assemblages and associations. Consideration of these issues can come to an understanding of the factors behind the differences in the scale and extent of gold deposits of various types, as well as to form a mineralogical search features gold-bearing mineralization. Development Of Decision-Making Algorithm On Efficiency Of Operators And Traffic Controllers Of Air Transport Based On Their Psycho-Physiological Conditions And Productivities R.M. Jafarzade, T.R. Jafarzade By processing the data on the human-operator active performance with respect to their psycho-physiological conditions and productivities in the human-machine systems, we developed the algorithm for the possibilities of further execution of their (operator) duties in the incomplete and unclear initial data. Using fuzzy clustering and the interval fuzzy sets of the second type, and the coordinated assessment of expert opinions on the binary relationship of objects from the class with recommendations on the further implementation of their activities, we obtained the individual assessment of the alternative recommendations for each of the tested objects from the set of objects. The calculation for the experimental data is provided. The proposed approach can be used for the adaptive selection of recommendations on the continuation of duties of air operators and air traffic controllers by taking into account the dynamic of changes of their psycho-physiological states and productivities. Management Of Portfolio Of Securities On The Basis Of Minimization Of The Conditional Expected Losses S.M. Javadova On the basis of a method of empirical averages for the general problem of stochastic programming, convergence of the solution of an approximating task to the solution of a problem of conditional minimization of the expected losses when forming an investment portfolio is proved. Numerical calculations on a concrete example of two joint stock companies are received by means of the program of linear programming in MATLAB system.
SAEQ Issue 16
Author:
Publisher: Elmar Janahmadov (SAEQ LTD)
ISBN:
Category : Science
Languages : en
Pages : 20
Book Description
Issue 16 July-Aug-Sept 2018
Publisher: Elmar Janahmadov (SAEQ LTD)
ISBN:
Category : Science
Languages : en
Pages : 20
Book Description
Issue 16 July-Aug-Sept 2018
SAEQ Issue 04
Author:
Publisher: SAEQ LTD
ISBN:
Category : Science
Languages : en
Pages : 37
Book Description
Issue 04 July-Aug-Sept 2014 Diagnosis Of The Contact Interaction Of Solid Bodies At Friction Using Fractal Analysis Methods A.Kh. Janahmadov, M.Y. Javadov, O.A. Dyshin Were developed the additional quantitative research tools of the surface roughness: the fractal dimension of curvature on the bearing surface and the fractal dimension of profilograph. These values are used to classify the regimes of the contact interaction of the metal elements at friction and to diagnose the form of contact according to the fractal dimensions scale, which describes the main three types of contacts: elastic, elastic-plastic and plastic. The Stock Price Valuation Based On The Stochastic Modeling Of Financial Data S.M. Javadova The stochastic model is developed to forecast a movement of stock prices as function of the Wiener process. The canonical decomposition of function values through discrete number of points is used to generate the Wiener process. Factors Causing Corrosion And Destruction of Coating in Operation of Oil-Field Pump N.G. Javadov, A.M. Mehtiev The paper review and analyzes factors that contribute towards corrosion and destruction of coating during operation of oil-field pump. It is noted that factors such as cold, moisture, heat, corrosive components of pumped fluid, mechanical stress, etc., have negative impact. Relations Of Cytokine Blood Spectrum With Nephropathy At Patients With Diabetes A.N. Babakhanova Work objective is to study the cytokine status of patients with diabetes of type 1 and type 2 with a complicated nephropathy and an uncomplicated course. 123 patients with diabetes and the control group of 20 people were inspected. By the immune-enzyme analysis of ELISA the levels (INF-γ, TNF-α, IL-6, IL-1β) were determined in blood serum of the patients. The most expressed changes of the cytokine status were observed in the patients of diabetes of type 1 and type 2 which were expressed in the initial increase of the maintenance of all studied pro-inflammatory cytokines (INF-γ, TNF-α, IL-6, IL-1β). Such changes in activation of the pro-inflammatory cytokines characterize this disease as an inflammatory immune-dependent process. The changes in the cytokine status had a non-uniform character with the most expressed changes in IL-1β, TNF-α, INF-γ synthesis (p ≤ 0,001) and a slight increase of IL-6.
Publisher: SAEQ LTD
ISBN:
Category : Science
Languages : en
Pages : 37
Book Description
Issue 04 July-Aug-Sept 2014 Diagnosis Of The Contact Interaction Of Solid Bodies At Friction Using Fractal Analysis Methods A.Kh. Janahmadov, M.Y. Javadov, O.A. Dyshin Were developed the additional quantitative research tools of the surface roughness: the fractal dimension of curvature on the bearing surface and the fractal dimension of profilograph. These values are used to classify the regimes of the contact interaction of the metal elements at friction and to diagnose the form of contact according to the fractal dimensions scale, which describes the main three types of contacts: elastic, elastic-plastic and plastic. The Stock Price Valuation Based On The Stochastic Modeling Of Financial Data S.M. Javadova The stochastic model is developed to forecast a movement of stock prices as function of the Wiener process. The canonical decomposition of function values through discrete number of points is used to generate the Wiener process. Factors Causing Corrosion And Destruction of Coating in Operation of Oil-Field Pump N.G. Javadov, A.M. Mehtiev The paper review and analyzes factors that contribute towards corrosion and destruction of coating during operation of oil-field pump. It is noted that factors such as cold, moisture, heat, corrosive components of pumped fluid, mechanical stress, etc., have negative impact. Relations Of Cytokine Blood Spectrum With Nephropathy At Patients With Diabetes A.N. Babakhanova Work objective is to study the cytokine status of patients with diabetes of type 1 and type 2 with a complicated nephropathy and an uncomplicated course. 123 patients with diabetes and the control group of 20 people were inspected. By the immune-enzyme analysis of ELISA the levels (INF-γ, TNF-α, IL-6, IL-1β) were determined in blood serum of the patients. The most expressed changes of the cytokine status were observed in the patients of diabetes of type 1 and type 2 which were expressed in the initial increase of the maintenance of all studied pro-inflammatory cytokines (INF-γ, TNF-α, IL-6, IL-1β). Such changes in activation of the pro-inflammatory cytokines characterize this disease as an inflammatory immune-dependent process. The changes in the cytokine status had a non-uniform character with the most expressed changes in IL-1β, TNF-α, INF-γ synthesis (p ≤ 0,001) and a slight increase of IL-6.
SAEQ Issue 03
Author:
Publisher: SAEQ LTD
ISBN:
Category : Science
Languages : en
Pages : 51
Book Description
Issue 03 Apr-May-June 2014 The Frictional Interaction In Electrical And Thermal Fields Of Metal Friction Pairs A.Kh. Janahmadov, A.I. Volchenko, E.S. Pirverdiev, D.A. Volchenko, N.A. Volchenko, D.Y. Zhuravlev The article examines the origins and development of the electrical and thermal explosions in the polymer lining subsurface layers, as well as the discharge penetrating through the layers of micro-protrusions. The Development Of Mathematical Models With “Skin-Factor” For The Petroleum Reservoir Filtration Ab.G. Rzaev, S.R. Rasulov, I.A. Abbasova, S.N. Rahimova The paper proposes a modified Dupuis formula, which describes the filtration process based on “skin-factor” of the polluted near oil-well area. The viability of proposed model is provided. The regularities of the reaction-regeneration cycles are established. The Safety Management Based On The Probabilistic Risk Assessment T.R. Jafarzade The probability estimation of potentially dangerous (basis) events is conducted on the basis of the current values of the risk factor given the risk significance of the individual components responsible for the flight safety. The flight is viewed as a random process described by a stochastic differential equation. The author raises the issue of absolute and guaranteed safety. The Mass-Transfer At The Wastewater Countercurrent Extraction Processes Inside Of The Spray Tower And Its Modeling A.A. Gasanov The wastewater treatment technology is developed on the basis of the solvent extraction using a spray extractor. In the paper the optimal process parameters are proposed and the consumption rates for continuous and dispersed phases are justified. The research results of the wastewater treatment produced by the paint and varnish manufacturers from butylglycol, phenilizopropanol, acetic acid and acetylacetone are included in the paper. The mathematical model of process is proposed; the specific area of the contact surface, the distance between the extractor cells, the coefficients of mass-impact and mass-transfer of the phase components are defined; the component concentrations in opposite phases and the aggregate height are calculated. The Deformation And Break Up Of Drops And Bubbles In The Isotropic Turbulent Flows G.I. Kelbaliyev, L.V. Guseynova, S.R. Rasulov, G.Z. Suleymanov The research paper is dedicated to the phenomena of deformation and break up of drops in the isotropic turbulent flow. The phenomena has been analyzed, modeled and compared with the experimental data. As a result of that research, the analytical solution is provided for the given problem, the expressions for estimation of the deformation level and the break up frequency depending on Red and Mo numbers have been obtained.
Publisher: SAEQ LTD
ISBN:
Category : Science
Languages : en
Pages : 51
Book Description
Issue 03 Apr-May-June 2014 The Frictional Interaction In Electrical And Thermal Fields Of Metal Friction Pairs A.Kh. Janahmadov, A.I. Volchenko, E.S. Pirverdiev, D.A. Volchenko, N.A. Volchenko, D.Y. Zhuravlev The article examines the origins and development of the electrical and thermal explosions in the polymer lining subsurface layers, as well as the discharge penetrating through the layers of micro-protrusions. The Development Of Mathematical Models With “Skin-Factor” For The Petroleum Reservoir Filtration Ab.G. Rzaev, S.R. Rasulov, I.A. Abbasova, S.N. Rahimova The paper proposes a modified Dupuis formula, which describes the filtration process based on “skin-factor” of the polluted near oil-well area. The viability of proposed model is provided. The regularities of the reaction-regeneration cycles are established. The Safety Management Based On The Probabilistic Risk Assessment T.R. Jafarzade The probability estimation of potentially dangerous (basis) events is conducted on the basis of the current values of the risk factor given the risk significance of the individual components responsible for the flight safety. The flight is viewed as a random process described by a stochastic differential equation. The author raises the issue of absolute and guaranteed safety. The Mass-Transfer At The Wastewater Countercurrent Extraction Processes Inside Of The Spray Tower And Its Modeling A.A. Gasanov The wastewater treatment technology is developed on the basis of the solvent extraction using a spray extractor. In the paper the optimal process parameters are proposed and the consumption rates for continuous and dispersed phases are justified. The research results of the wastewater treatment produced by the paint and varnish manufacturers from butylglycol, phenilizopropanol, acetic acid and acetylacetone are included in the paper. The mathematical model of process is proposed; the specific area of the contact surface, the distance between the extractor cells, the coefficients of mass-impact and mass-transfer of the phase components are defined; the component concentrations in opposite phases and the aggregate height are calculated. The Deformation And Break Up Of Drops And Bubbles In The Isotropic Turbulent Flows G.I. Kelbaliyev, L.V. Guseynova, S.R. Rasulov, G.Z. Suleymanov The research paper is dedicated to the phenomena of deformation and break up of drops in the isotropic turbulent flow. The phenomena has been analyzed, modeled and compared with the experimental data. As a result of that research, the analytical solution is provided for the given problem, the expressions for estimation of the deformation level and the break up frequency depending on Red and Mo numbers have been obtained.
SAEQ Issue 06
Author:
Publisher: SAEQ LTD
ISBN:
Category : Science
Languages : en
Pages : 29
Book Description
Issue 06 Jan-Feb-Mar 2015 Physical Mesomechanics And Spectrum Of Metal Surface Layer Excitation At Friction Process With Heavy Loading A.Kh. Janahmadov, N.G. Javadov The paper reviews the physical mesomechanics of structurally inhomogeneous media, developed on the verge of continuum mechanics (macro-level) and physics of plasticity and strength of deformable solids (micro-level). According to the concept of the structural level of deformation, at friction the surface layer of deformable solids is an independent leading functional subsystem. It is shown that with an increase of the deformation level of material, it develops autonomous processes (plasticity waves) inside, which have a significant impact on the staginess of plasticity flow localization and the destruction of contacting bodies, at the meso-level the deformation has a transitional-rotational character. Influence Of Wingtips On Induced Drag Force Of Rectangular Wing R.M. Jafarzade, M.H. Ilyasov, J.N. Huseynli The paper examines the influence of wingtips on the inductive resistance of rectangular wing through the mathematical model based on the distribution of vortices. Assuming that the free vortices originate at the wingtips – the imaginary Π-shape vortex diagram is built above the wing at the height of wingtips. The air is considered to be incompressible. Referring to the Biot-Savart formula, the expression for the inductive velocity, generated by the free vortices, and their average values along the wingspan are found. The induced drag force and its co- efficient are determined through the average bevel angle of flow. The inductive drag force is analytically proven. Application Of Coordination Polymers To Increase The Reservoir Oil Recovery B.T. Usubaliev, E.E. Ramazanova, F.T. Murvatov, E.N. Aliyev, Y.S. Salakhova, M.K. Munshieva, F.B. Aliyev, A.K. Rzaeva It is first time when an application of composite materials, BAF-1 BAF-2, on the basis of the co- ordination polymers is studied to improve the rheological properties of crude oil. It has been established that composite materials reduce the oil viscosity by 60-70% and also have a positive effect on other properties. Relaxation Of The Non-Equilibrium Field Effect In In2O3-SiO2-Si-SiO2-Al Structures At The Non-Equilibrium Depletion Regimes A.Z. Badalov, Sh.G. Zeynalova The article studies in detail the effect of various factors on the screening time of In2O3-SiO2- Si-SiO2-Al structures, the influence of the lighting temperature, and the supply voltage on the duration of the non-equilibrium non-stationary depletion process. It is also examines the dependence of the current depolarization on the power supply impulse duration with and without exposure to the LED light. The Theoretical Analysis Of Crude Oil Vapour Pressure And Cavitational Technologies Studying Of Physical And Chemical Properties Of Transported Oil In The Course Of Cavitation S.K. Gezalov We have worked out the criterion of fuzzy interval for minimizing target function with fuzzy coefficient. The given criterion shows adaptability of genetic algorithms for building pare-to-optimal solutions of multi-objective problem of transport logistics with fuzzy coefficient of objectives.
Publisher: SAEQ LTD
ISBN:
Category : Science
Languages : en
Pages : 29
Book Description
Issue 06 Jan-Feb-Mar 2015 Physical Mesomechanics And Spectrum Of Metal Surface Layer Excitation At Friction Process With Heavy Loading A.Kh. Janahmadov, N.G. Javadov The paper reviews the physical mesomechanics of structurally inhomogeneous media, developed on the verge of continuum mechanics (macro-level) and physics of plasticity and strength of deformable solids (micro-level). According to the concept of the structural level of deformation, at friction the surface layer of deformable solids is an independent leading functional subsystem. It is shown that with an increase of the deformation level of material, it develops autonomous processes (plasticity waves) inside, which have a significant impact on the staginess of plasticity flow localization and the destruction of contacting bodies, at the meso-level the deformation has a transitional-rotational character. Influence Of Wingtips On Induced Drag Force Of Rectangular Wing R.M. Jafarzade, M.H. Ilyasov, J.N. Huseynli The paper examines the influence of wingtips on the inductive resistance of rectangular wing through the mathematical model based on the distribution of vortices. Assuming that the free vortices originate at the wingtips – the imaginary Π-shape vortex diagram is built above the wing at the height of wingtips. The air is considered to be incompressible. Referring to the Biot-Savart formula, the expression for the inductive velocity, generated by the free vortices, and their average values along the wingspan are found. The induced drag force and its co- efficient are determined through the average bevel angle of flow. The inductive drag force is analytically proven. Application Of Coordination Polymers To Increase The Reservoir Oil Recovery B.T. Usubaliev, E.E. Ramazanova, F.T. Murvatov, E.N. Aliyev, Y.S. Salakhova, M.K. Munshieva, F.B. Aliyev, A.K. Rzaeva It is first time when an application of composite materials, BAF-1 BAF-2, on the basis of the co- ordination polymers is studied to improve the rheological properties of crude oil. It has been established that composite materials reduce the oil viscosity by 60-70% and also have a positive effect on other properties. Relaxation Of The Non-Equilibrium Field Effect In In2O3-SiO2-Si-SiO2-Al Structures At The Non-Equilibrium Depletion Regimes A.Z. Badalov, Sh.G. Zeynalova The article studies in detail the effect of various factors on the screening time of In2O3-SiO2- Si-SiO2-Al structures, the influence of the lighting temperature, and the supply voltage on the duration of the non-equilibrium non-stationary depletion process. It is also examines the dependence of the current depolarization on the power supply impulse duration with and without exposure to the LED light. The Theoretical Analysis Of Crude Oil Vapour Pressure And Cavitational Technologies Studying Of Physical And Chemical Properties Of Transported Oil In The Course Of Cavitation S.K. Gezalov We have worked out the criterion of fuzzy interval for minimizing target function with fuzzy coefficient. The given criterion shows adaptability of genetic algorithms for building pare-to-optimal solutions of multi-objective problem of transport logistics with fuzzy coefficient of objectives.
SAEQ Issue 02
Author:
Publisher: http://www.saeqltd.com
ISBN:
Category : Science
Languages : en
Pages : 37
Book Description
Issue 02 Jan-Feb-Mar 2014 The Characteristic Analysis Of Changes In The Processes, Phenomena And Effects Within Working Layers Of Metal Polymer Pairs During Electro-Thermo-Mechanical Friction A.Kh. Janahmadov, A.I. Volchenko, M.Y. Javadov, D.A. Volchenko, N.A. Volchenko, E.A. Janahmadov The wave nature of changes in the external and internal characteristics of the metal polymer pairs at the electro-thermo-mechanical friction. The Research And Development Of The Highly Efficient Catalyst Of The C3-C4 Hydrocarbon Processing S.R. Rasulov, N.A. Salimova, G.R. Mustafaeva, L.V. Huseynova The effect of the different input methods of modifiers is studied: ion exchange, impregnation and dry mechanical mixing of catalytic properties of the zeolite base catalyst at the C3-C4 hydrocarbon conversion. The obtained quantitative data helps to identify the significant differences for the thermo-steaming and thermal activation of the modified catalyst exhibited during the conversion of the C3-C4 hydrocarbons and the selectivity of aromatic hydrocarbons. It is shown that the sample made of by the mechanical mixing with a subsequent high temperature treatment is most active.The regularities of the reaction-regeneration cycles are established. Technological Aspects Of Machine Parts Durability Improvements A.M. Gafarov, P.G. Suleymanov, V.A. Gafarov, F.M. Kalbiyev Based on the papers of national and foreign authors, the technological overview of the machine parts wear resistance is given in the paper. The obtained data is analyzed. The Study Of Factors Affecting On The Heating Of Elastic Elements Of The Coupling I.A. Khalilov The article studies the heating of the elastic element of the coupling depending on the influencing factors such as the damping capacity of the coupling, the ratio of the inertia moments in the driving and driven machinery details, the heat transfer coefficient and the cooling area of the of the elastic element of the coupling and the circumferential frequency of oscillation of the machinery driving system.
Publisher: http://www.saeqltd.com
ISBN:
Category : Science
Languages : en
Pages : 37
Book Description
Issue 02 Jan-Feb-Mar 2014 The Characteristic Analysis Of Changes In The Processes, Phenomena And Effects Within Working Layers Of Metal Polymer Pairs During Electro-Thermo-Mechanical Friction A.Kh. Janahmadov, A.I. Volchenko, M.Y. Javadov, D.A. Volchenko, N.A. Volchenko, E.A. Janahmadov The wave nature of changes in the external and internal characteristics of the metal polymer pairs at the electro-thermo-mechanical friction. The Research And Development Of The Highly Efficient Catalyst Of The C3-C4 Hydrocarbon Processing S.R. Rasulov, N.A. Salimova, G.R. Mustafaeva, L.V. Huseynova The effect of the different input methods of modifiers is studied: ion exchange, impregnation and dry mechanical mixing of catalytic properties of the zeolite base catalyst at the C3-C4 hydrocarbon conversion. The obtained quantitative data helps to identify the significant differences for the thermo-steaming and thermal activation of the modified catalyst exhibited during the conversion of the C3-C4 hydrocarbons and the selectivity of aromatic hydrocarbons. It is shown that the sample made of by the mechanical mixing with a subsequent high temperature treatment is most active.The regularities of the reaction-regeneration cycles are established. Technological Aspects Of Machine Parts Durability Improvements A.M. Gafarov, P.G. Suleymanov, V.A. Gafarov, F.M. Kalbiyev Based on the papers of national and foreign authors, the technological overview of the machine parts wear resistance is given in the paper. The obtained data is analyzed. The Study Of Factors Affecting On The Heating Of Elastic Elements Of The Coupling I.A. Khalilov The article studies the heating of the elastic element of the coupling depending on the influencing factors such as the damping capacity of the coupling, the ratio of the inertia moments in the driving and driven machinery details, the heat transfer coefficient and the cooling area of the of the elastic element of the coupling and the circumferential frequency of oscillation of the machinery driving system.
SAEQ Issue 01
Author:
Publisher: SAEQ LTD
ISBN:
Category : Science
Languages : en
Pages : 40
Book Description
Issue 01 Oct-Nov-Dec 2013 The Multi-Fructural Analysis Of Fatigue Failure Under Friction Process A.M. Pashayev, A.Kh. Janahmadov, O.A. Dyshin, M.Y. Javadov The article shows the need to combine approaches of synergetics and fractals in the study of friction and wear in the frictional contact, due to fact that dissipative structures, self-organising in the open systems, are known to have a fractal behaviour The multi-fractal concept allows to introduce new quantitative structures, characterised by a spectrum of generalised fractal dimensions and reflected by the degree of randomness. Different levels of structure (micro-, mesa- and macro-scale) are described in the framework of multi-fractal analysis. A procedure to calculate the multi-fractal dimension of this structure is developed and the results of the numerical calculations are submitted.Research Of Loading Distribution On Coils Of Running Pair Of The LatchN.H.JavadovIt is given the calculation procedure of distribution of pressure on coils of running pair of latch at various loading schemes. Recommendations are provided for the choice of loading schemes of running pair, which ensures more uniform distributions and therefore, considerably reduces the wear of coils by means of constructive changes in a latch. Modeling And Forecasting The Financial Markets Using Theory Of Deterministic Chaos And Fractals S.M. Javadova This paper presents the results of the multi-fractal analysis based on the wavelet transformation, which can be considered as method of studying the spectral correlation properties of various processes, including non-stationary. Comparative experience with methods MFFA (multi-fractal fluctuation analysis) and WTMM (wavelet transform modulus maxima) in studying of the multi-fractal properties of signals of time function shows that MFFA method is more reliable and robust.As an instrument of the ‘local’ study of time function structure, WTMM allows to evaluate the correlation properties of random processes in comparison with a short signal. Surface Structures Of Frictional Materials On Asbestosfree Base M.I. Aliyev Development of asbestosfree composite materials on petroleum coke base enabled to obtain environmentally sound products with sufficiently high physical, mechanical and tribotechnical characteristics. The materials have been analyzed/tested from the perspective of physicochemical friction mechanics in the breaking mode through the differential-thermal analysis (DTA) and thermogravimetric analysis (TGM), supplemented with the study of friction materials structure. The thermogravimetric analysis findings indicated that decomposition of the new asbestosfree friction material begins after 14 minutes at 3000C.
Publisher: SAEQ LTD
ISBN:
Category : Science
Languages : en
Pages : 40
Book Description
Issue 01 Oct-Nov-Dec 2013 The Multi-Fructural Analysis Of Fatigue Failure Under Friction Process A.M. Pashayev, A.Kh. Janahmadov, O.A. Dyshin, M.Y. Javadov The article shows the need to combine approaches of synergetics and fractals in the study of friction and wear in the frictional contact, due to fact that dissipative structures, self-organising in the open systems, are known to have a fractal behaviour The multi-fractal concept allows to introduce new quantitative structures, characterised by a spectrum of generalised fractal dimensions and reflected by the degree of randomness. Different levels of structure (micro-, mesa- and macro-scale) are described in the framework of multi-fractal analysis. A procedure to calculate the multi-fractal dimension of this structure is developed and the results of the numerical calculations are submitted.Research Of Loading Distribution On Coils Of Running Pair Of The LatchN.H.JavadovIt is given the calculation procedure of distribution of pressure on coils of running pair of latch at various loading schemes. Recommendations are provided for the choice of loading schemes of running pair, which ensures more uniform distributions and therefore, considerably reduces the wear of coils by means of constructive changes in a latch. Modeling And Forecasting The Financial Markets Using Theory Of Deterministic Chaos And Fractals S.M. Javadova This paper presents the results of the multi-fractal analysis based on the wavelet transformation, which can be considered as method of studying the spectral correlation properties of various processes, including non-stationary. Comparative experience with methods MFFA (multi-fractal fluctuation analysis) and WTMM (wavelet transform modulus maxima) in studying of the multi-fractal properties of signals of time function shows that MFFA method is more reliable and robust.As an instrument of the ‘local’ study of time function structure, WTMM allows to evaluate the correlation properties of random processes in comparison with a short signal. Surface Structures Of Frictional Materials On Asbestosfree Base M.I. Aliyev Development of asbestosfree composite materials on petroleum coke base enabled to obtain environmentally sound products with sufficiently high physical, mechanical and tribotechnical characteristics. The materials have been analyzed/tested from the perspective of physicochemical friction mechanics in the breaking mode through the differential-thermal analysis (DTA) and thermogravimetric analysis (TGM), supplemented with the study of friction materials structure. The thermogravimetric analysis findings indicated that decomposition of the new asbestosfree friction material begins after 14 minutes at 3000C.
Glosario Del Banco Mundial
Author: World Bank
Publisher: World Bank Publications
ISBN:
Category : Business & Economics
Languages : en
Pages : 468
Book Description
This edition of the World Bank has been revised and expanded by the Terminology Unit in the Languages Services Division of the World Bank in collaboration with the English, Spanish, and French Translation Sections. The Glossary is intended to assist the Bank's translators and interpreters, other Bank staff using French and Spanish in their work, and free-lance translator's and interpreters employed by the Bank. For this reason, the Glossary contains not only financial and economic terminology and terms relating to the Bank's procedures and practices, but also terms that frequently occur in Bank documents, and others for which the Bank has a preferred equivalent. Although many of these terms, relating to such fields as agriculture, education, energy, housing, law, technology, and transportation, could be found in other sources, they have been assembled here for ease of reference. A list of acronyms occurring frequently in Bank texts (the terms to which they refer being found in the Glossary) and a list of international, regional, and national organizations will be found at the end of the Glossary.
Publisher: World Bank Publications
ISBN:
Category : Business & Economics
Languages : en
Pages : 468
Book Description
This edition of the World Bank has been revised and expanded by the Terminology Unit in the Languages Services Division of the World Bank in collaboration with the English, Spanish, and French Translation Sections. The Glossary is intended to assist the Bank's translators and interpreters, other Bank staff using French and Spanish in their work, and free-lance translator's and interpreters employed by the Bank. For this reason, the Glossary contains not only financial and economic terminology and terms relating to the Bank's procedures and practices, but also terms that frequently occur in Bank documents, and others for which the Bank has a preferred equivalent. Although many of these terms, relating to such fields as agriculture, education, energy, housing, law, technology, and transportation, could be found in other sources, they have been assembled here for ease of reference. A list of acronyms occurring frequently in Bank texts (the terms to which they refer being found in the Glossary) and a list of international, regional, and national organizations will be found at the end of the Glossary.