Removal of Technetium from Hanford Tank 241-AP-101

Removal of Technetium from Hanford Tank 241-AP-101 PDF Author: Ingrid E. Burgeson
Publisher:
ISBN:
Category : Chemical engineering
Languages : en
Pages :

Get Book Here

Book Description

Removal of Technetium from Hanford Tank 241-AP-101

Removal of Technetium from Hanford Tank 241-AP-101 PDF Author: Ingrid E. Burgeson
Publisher:
ISBN:
Category : Chemical engineering
Languages : en
Pages :

Get Book Here

Book Description


Multiple Ion Exchange Column Tests for Technetium Removal from Hanford Tank Waste Supernate

Multiple Ion Exchange Column Tests for Technetium Removal from Hanford Tank Waste Supernate PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 5

Get Book Here

Book Description
Five cycles of loading, elution, and regeneration were performed to remove technetium from a Hanford waste sample retrieved from Tank 241-AW-101 using SuperLig 639 resin. The waste sample was diluted to 4.95 M Na plus and then was processed to remove 137Cs through dual ion exchange columns each containing 15 mL of SuperLig 644. To remove 99Tc, the cesium decontaminated solution was processed downwards through two ion exchange columns, each containing 12 mL of SuperLig 639 resin. The columns, designated as lead and lag, each had an inside diameter of 1.45 cm and a height of 30 cm. The columns were loaded in series, but were eluted and then regenerated separately. The average technetium loading for the cycles was 250 BV at 10 percent breakthrough. There was no significant difference in the loading performances among the five cycles. The percent removal of 99Tc was greater than 99.94 percent and the average decontamination factor (DF) was approximately 1.7 x 103. Approximately 99 percent of the 99Tc loaded on the resin was eluted with less than 15 BV of de-ionized water at 65 degrees C.

Engineering Separations Unit Operations for Nuclear Processing

Engineering Separations Unit Operations for Nuclear Processing PDF Author: Reid Peterson
Publisher: CRC Press
ISBN: 0429882556
Category : Science
Languages : en
Pages : 328

Get Book Here

Book Description
Engineering Separations Unit Operations for Nuclear Processing provides insight into the fundamentals of separations in nuclear materials processing not covered in typical texts. This book integrates fuel cycle and waste processing into a single, coherent approach, demonstrating that the principles from one field can and should be applied to the other. It provides historical perspectives on nuclear materials processing, current assessment and challenges, and how past challenges were overcome. It also provides understanding of the engineering principles associated with handling nuclear materials. This book is aimed at researchers, graduate students, and professionals in the fields of chemical engineering, mechanical engineering, nuclear engineering, and materials engineering.

Technetium in Alkaline, High-salt, Radioactive Tank Waste Supernate: Preliminary Characterization and Removal

Technetium in Alkaline, High-salt, Radioactive Tank Waste Supernate: Preliminary Characterization and Removal PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
This report describes the initial work conducted at Pacific Northwest National Laboratory to study technetium (Tc) removal from Hanford tank waste supernates and Tc oxidation state in the supernates. Filtered supernate samples from four tanks were studied: a composite double shell slurry feed (DSSF) consisting of 70% from Tank AW-101, 20% from AP-106, and 10% from AP-102; and three complexant concentrate (CC) wastes (Tanks AN-107, SY-101, ANS SY-103) that are distinguished by having a high concentration of organic complexants. The work included batch contacts of these waste samples with Reillex[trademark]-HPQ (anion exchanger from Reilly Industries) and ABEC 5000 (a sorbent from Eichrom Industries), materials designed to effectively remove Tc as pertechnetate from tank wastes. A short study of Tc analysis methods was completed. A preliminary identification of the oxidation state of non-pertechnetate species in the supernates was made by analyzing the technetium x-ray absorption spectra of four CC waste samples. Molybdenum (Mo) and rhenium (Re) spiked test solutions and simulants were tested with electrospray ionization-mass spectrometry to evaluate the feasibility of the technique for identifying Tc species in waste samples.

The Office of Environmental Management Technical Reports: A Bibliography

The Office of Environmental Management Technical Reports: A Bibliography PDF Author:
Publisher: DIANE Publishing
ISBN: 1428918744
Category :
Languages : en
Pages : 245

Get Book Here

Book Description
The Office of Environmental Management's (EM) technical reports bibliography is an annual publication that contains information on scientific and technical reports sponsored by the Office of Environmental Management added to the Energy Science and Technology Database from July 1, 1994 through June 30, 1995. This information is divided into the following categories: Focus Areas, Cross-Cutting Programs, and Support Programs. In addition, a category for general information is included. EM's Office of Science and Technology sponsors this bibliography.

Hanford Site Tank 241-SY-101, Damaged Equipment Removal

Hanford Site Tank 241-SY-101, Damaged Equipment Removal PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 12

Get Book Here

Book Description
Hanford Site Tank 241-SY-101 has a history of generating hydrogen-nitrous oxide gases. The gases are generated and trapped in the non-convective waste layer near the bottom of the 23-m- (75-ft- ) diameter underground tank. Approximately every three months the pressure in the tank is relieved as the trapped gases are released through or around the surface crust into the tank dome. This process moves large amounts of liquid waste and crust material around in the tank. The moving waste displaced air lances and thermocouple assemblies (2-in. schedule-40 pipe) installed in four tank risers and permanently bent them to a maximum angle of 40 degrees. The bends were so severe that assemblies could not be removed from the tank using the originally designed hardware. Just after the tank releases the trapped gas, a 20-to-30-day work ''window'' opens.

Hanfor Site Tank 241-SY-101, Damaged Equipment Removal

Hanfor Site Tank 241-SY-101, Damaged Equipment Removal PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description


The Office of Environmental Management Technical Reports

The Office of Environmental Management Technical Reports PDF Author:
Publisher:
ISBN:
Category : Environmental management
Languages : en
Pages : 972

Get Book Here

Book Description


Small Column Testing of SuperLig 639 for Removing 99Tc from Hanford Tank Waste Envelope A (Tnak 241-AW-101).

Small Column Testing of SuperLig 639 for Removing 99Tc from Hanford Tank Waste Envelope A (Tnak 241-AW-101). PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :

Get Book Here

Book Description
No abstract prepared.

Extraction of Technetium from Simulated Hanford Tank Wastes

Extraction of Technetium from Simulated Hanford Tank Wastes PDF Author:
Publisher:
ISBN:
Category :
Languages : en
Pages : 20

Get Book Here

Book Description