Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 and 8 data for expansion corner flows

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 and 8 data for expansion corner flows PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages : 96

Get Book Here

Book Description
"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 and 8 data for expansion corner flows

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 and 8 data for expansion corner flows PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages : 96

Get Book Here

Book Description
"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 and 8 data for expansion corner flows

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 and 8 data for expansion corner flows PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages :

Get Book Here

Book Description
"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.1.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 pressure data for flows ahead of ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 pressure data for flows ahead of ramps PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages : 238

Get Book Here

Book Description
"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 pressure data for flows ahead of ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 pressure data for flows ahead of ramps PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages : 144

Get Book Here

Book Description
"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 heat transfer data for flows ahead of ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 heat transfer data for flows ahead of ramps PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages : 172

Get Book Here

Book Description
"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.4.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category :
Languages : en
Pages : 227

Get Book Here

Book Description


Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 pressure data for flows ahead of ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 5 pressure data for flows ahead of ramps PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages :

Get Book Here

Book Description
"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.1.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 pressure data for flows ahead of ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 pressure data for flows ahead of ramps PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages :

Get Book Here

Book Description
"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.1.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 heat transfer data for flows ahead of ramps

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps: Mach 8 heat transfer data for flows ahead of ramps PDF Author: Louis G. Kaufman
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages :

Get Book Here

Book Description
"Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for [M sub infinity =] 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for [M sub infinity =] 8 for Reynolds numbers between 1.1 and 3.3 million." -- page iii, pt.1.

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps. Part Iii: Mach 8 Pressure Data for Flows Ahead of Ramps Part of an Investigation of Hypersonic Flow Separation and Control Characteristics

Pressure and Heat Transfer Measurements for Hypersonic Flows Over Expansion Corners and Ahead of Ramps. Part Iii: Mach 8 Pressure Data for Flows Ahead of Ramps Part of an Investigation of Hypersonic Flow Separation and Control Characteristics PDF Author: Louis G Kaufman (II.)
Publisher:
ISBN:
Category :
Languages : en
Pages : 140

Get Book Here

Book Description
Pressure and heat transfer data were obtained for hypersonic flows over 40-degree expansion corners and ahead of ramps. Full and partial span ramps, having wedge angles up to 90 degrees, were tested at two locations on a sharp leading edge flat plate, with and without end plates. Pressure data were obtained for Mach 5 for model length Reynolds numbers between 1.1 and 6.6 million. Both pressure and heat transfer data were obtained for Mach 8 for Reynolds numbers between 1.1 and 3.3 million. (Author).