Predictive Functional Control PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Predictive Functional Control PDF full book. Access full book title Predictive Functional Control by Jacques Richalet. Download full books in PDF and EPUB format.
Author: Jacques Richalet
Publisher: Springer Science & Business Media
ISBN: 1848824939
Category : Technology & Engineering
Languages : en
Pages : 236
Get Book
Book Description
first industrial application of MPC was in 1973. A key motivation was to provide better performance than could be obtained with the widely-used PID controller whilst making it easy to replace the PID controller unit or module with his new algorithm. It was the advent of digital control technology and the use of software control algorithms that made this replacement easier and more acceptable to process engineers. A decade of industrial practice with PFC was reported in the archival literature by Jacques Richalet et al. in 1978 in an important seminal Automatica paper. Around this time, Cutler and Ramaker published the dynamic matrix control algorithm that also used knowledge of future reference signals to determine a sequence of control signal adjustment. Thus, the theoretical and practical development of predictive control methods was underway and subsequent developments included those of generalized predictive control, and the whole armoury of MPC methods. Jacques Richalet’s approach to PFC was to seek an algorithm that was: • easy to understand; • easy to install; • easy to tune and optimise. He sought a new modular control algorithm that could be readily used by the control-technician engineer or the control-instrument engineer. It goes without saying that this objective also forms a good market strategy.
Author: Jacques Richalet
Publisher: Springer Science & Business Media
ISBN: 1848824939
Category : Technology & Engineering
Languages : en
Pages : 236
Get Book
Book Description
first industrial application of MPC was in 1973. A key motivation was to provide better performance than could be obtained with the widely-used PID controller whilst making it easy to replace the PID controller unit or module with his new algorithm. It was the advent of digital control technology and the use of software control algorithms that made this replacement easier and more acceptable to process engineers. A decade of industrial practice with PFC was reported in the archival literature by Jacques Richalet et al. in 1978 in an important seminal Automatica paper. Around this time, Cutler and Ramaker published the dynamic matrix control algorithm that also used knowledge of future reference signals to determine a sequence of control signal adjustment. Thus, the theoretical and practical development of predictive control methods was underway and subsequent developments included those of generalized predictive control, and the whole armoury of MPC methods. Jacques Richalet’s approach to PFC was to seek an algorithm that was: • easy to understand; • easy to install; • easy to tune and optimise. He sought a new modular control algorithm that could be readily used by the control-technician engineer or the control-instrument engineer. It goes without saying that this objective also forms a good market strategy.
Author: Eduardo F. Camacho
Publisher: Springer Science & Business Media
ISBN: 1447130081
Category : Technology & Engineering
Languages : en
Pages : 250
Get Book
Book Description
Model Predictive Control is an important technique used in the process control industries. It has developed considerably in the last few years, because it is the most general way of posing the process control problem in the time domain. The Model Predictive Control formulation integrates optimal control, stochastic control, control of processes with dead time, multivariable control and future references. The finite control horizon makes it possible to handle constraints and non linear processes in general which are frequently found in industry. Focusing on implementation issues for Model Predictive Controllers in industry, it fills the gap between the empirical way practitioners use control algorithms and the sometimes abstractly formulated techniques developed by researchers. The text is firmly based on material from lectures given to senior undergraduate and graduate students and articles written by the authors.
Author: J.A. Rossiter
Publisher: CRC Press
ISBN: 1351597159
Category : Technology & Engineering
Languages : en
Pages : 463
Get Book
Book Description
The book presents a significant expansion in depth and breadth of the previous edition. It includes substantially more numerical illustrations and copious supporting MATLAB code that the reader can use to replicate illustrations or build his or her own. The code is deliberately written to be as simple as possible and easy to edit. The book is an excellent starting point for any researcher to gain a solid grounding in MPC concepts and algorithms before moving into application or more advanced research topics. Sample problems for readers are embedded throughout the chapters, and in-text questions are designed for readers to demonstrate an understanding of concepts through numerical simulation.
Author: Saša V. Raković
Publisher: Springer
ISBN: 3319774891
Category : Science
Languages : en
Pages : 692
Get Book
Book Description
Recent developments in model-predictive control promise remarkable opportunities for designing multi-input, multi-output control systems and improving the control of single-input, single-output systems. This volume provides a definitive survey of the latest model-predictive control methods available to engineers and scientists today. The initial set of chapters present various methods for managing uncertainty in systems, including stochastic model-predictive control. With the advent of affordable and fast computation, control engineers now need to think about using “computationally intensive controls,” so the second part of this book addresses the solution of optimization problems in “real” time for model-predictive control. The theory and applications of control theory often influence each other, so the last section of Handbook of Model Predictive Control rounds out the book with representative applications to automobiles, healthcare, robotics, and finance. The chapters in this volume will be useful to working engineers, scientists, and mathematicians, as well as students and faculty interested in the progression of control theory. Future developments in MPC will no doubt build from concepts demonstrated in this book and anyone with an interest in MPC will find fruitful information and suggestions for additional reading.
Author: Frank Allgöwer
Publisher: Birkhäuser
ISBN: 3034884079
Category : Mathematics
Languages : en
Pages : 463
Get Book
Book Description
During the past decade model predictive control (MPC), also referred to as receding horizon control or moving horizon control, has become the preferred control strategy for quite a number of industrial processes. There have been many significant advances in this area over the past years, one of the most important ones being its extension to nonlinear systems. This book gives an up-to-date assessment of the current state of the art in the new field of nonlinear model predictive control (NMPC). The main topic areas that appear to be of central importance for NMPC are covered, namely receding horizon control theory, modeling for NMPC, computational aspects of on-line optimization and application issues. The book consists of selected papers presented at the International Symposium on Nonlinear Model Predictive Control – Assessment and Future Directions, which took place from June 3 to 5, 1998, in Ascona, Switzerland. The book is geared towards researchers and practitioners in the area of control engineering and control theory. It is also suited for postgraduate students as the book contains several overview articles that give a tutorial introduction into the various aspects of nonlinear model predictive control, including systems theory, computations, modeling and applications.
Author: Liuping Wang
Publisher: Springer Science & Business Media
ISBN: 1848823312
Category : Technology & Engineering
Languages : en
Pages : 378
Get Book
Book Description
Model Predictive Control System Design and Implementation Using MATLAB® proposes methods for design and implementation of MPC systems using basis functions that confer the following advantages: - continuous- and discrete-time MPC problems solved in similar design frameworks; - a parsimonious parametric representation of the control trajectory gives rise to computationally efficient algorithms and better on-line performance; and - a more general discrete-time representation of MPC design that becomes identical to the traditional approach for an appropriate choice of parameters. After the theoretical presentation, coverage is given to three industrial applications. The subject of quadratic programming, often associated with the core optimization algorithms of MPC is also introduced and explained. The technical contents of this book is mainly based on advances in MPC using state-space models and basis functions. This volume includes numerous analytical examples and problems and MATLAB® programs and exercises.
Author: Ronald Soeterboek
Publisher: Prentice Hall International
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 384
Get Book
Book Description
Describes in detail how several well-known predictive control schemes (for example, DMC and GPC) and other, more formal controller design methods can be formulated within a unified framework. The influence of the design parameters on control system performance and robustness is emphasized.
Author: Ding Baocang
Publisher: CRC Press
ISBN: 1439859671
Category : Technology & Engineering
Languages : en
Pages : 117
Get Book
Book Description
Modern Predictive Control explains how MPC differs from other control methods in its implementation of a control action. Most importantly, MPC provides the flexibility to act while optimizing—which is essential to the solution of many engineering problems in complex plants, where exact modeling is impossible. The superiority of MPC is in its numerical solution. Usually, MPC is employed to solve a finite-horizon optimal control problem at each sampling instant and obtain control actions for both the present time and a future period. However, only the current control move is applied to the plant. This complete, step-by-step exploration of various approaches to MPC: Introduces basic concepts of systems, modeling, and predictive control, detailing development from classical MPC to synthesis approaches Explores use of Model Algorithmic Control (MAC), Dynamic Matrix Control (DMC), Generalized Predictive Control (GPC), and Two-Step Model Predictive Control Identifies important general approaches to synthesis Discusses open-loop and closed-loop optimization in synthesis approaches Covers output feedback synthesis approaches with and without a finite switching horizon This book gives researchers a variety of models for use with one- and two-step control. The author clearly explains the variations between predictive control methods—and the root of these differences—to illustrate that there is no one ideal MPC and that one should remain open to selecting the best possible model in each unique circumstance.
Author: Luigi Del Re
Publisher: Springer
ISBN: 1849960712
Category : Technology & Engineering
Languages : en
Pages : 290
Get Book
Book Description
Automotive control has developed over the decades from an auxiliary te- nology to a key element without which the actual performances, emission, safety and consumption targets could not be met. Accordingly, automotive control has been increasing its authority and responsibility – at the price of complexity and di?cult tuning. The progressive evolution has been mainly ledby speci?capplicationsandshorttermtargets,withthe consequencethat automotive control is to a very large extent more heuristic than systematic. Product requirements are still increasing and new challenges are coming from potentially huge markets like India and China, and against this ba- ground there is wide consensus both in the industry and academia that the current state is not satisfactory. Model-based control could be an approach to improve performance while reducing development and tuning times and possibly costs. Model predictive control is a kind of model-based control design approach which has experienced a growing success since the middle of the 1980s for “slow” complex plants, in particular of the chemical and process industry. In the last decades, severaldevelopments haveallowedusing these methods also for “fast”systemsandthis hassupporteda growinginterestinitsusealsofor automotive applications, with several promising results reported. Still there is no consensus on whether model predictive control with its high requi- ments on model quality and on computational power is a sensible choice for automotive control.
Author: Nassim Khaled
Publisher: Butterworth-Heinemann
ISBN: 0128139196
Category : Technology & Engineering
Languages : en
Pages : 262
Get Book
Book Description
Practical Design and Application of Model Predictive Control is a self-learning resource on how to design, tune and deploy an MPC using MATLAB® and Simulink®. This reference is one of the most detailed publications on how to design and tune MPC controllers. Examples presented range from double-Mass spring system, ship heading and speed control, robustness analysis through Monte-Carlo simulations, photovoltaic optimal control, and energy management of power-split and air-handling control. Readers will also learn how to embed the designed MPC controller in a real-time platform such as Arduino®. The selected problems are nonlinear and challenging, and thus serve as an excellent experimental, dynamic system to show the reader the capability of MPC. The step-by-step solutions of the problems are thoroughly documented to allow the reader to easily replicate the results. Furthermore, the MATLAB® and Simulink® codes for the solutions are available for free download. Readers can connect with the authors through the dedicated website which includes additional free resources at www.practicalmpc.com. Illustrates how to design, tune and deploy MPC for projects in a quick manner Demonstrates a variety of applications that are solved using MATLAB® and Simulink® Bridges the gap in providing a number of realistic problems with very hands-on training Provides MATLAB® and Simulink® code solutions. This includes nonlinear plant models that the reader can use for other projects and research work Presents application problems with solutions to help reinforce the information learned
