Author: K.L. Mittal
Publisher: Springer Science & Business Media
ISBN: 1461305314
Category : Science
Languages : en
Pages : 320
Book Description
This volume documents the proceedings of the Second Symposium on Particles on Surfaces: Detection, Adhesion and Removal held as part of the 19th Annual Meeting of the Fine Particle Society in Santa Clara, California, July 20-25, 1988. The premier symposium on this topic was l organized in 1986 and has been properly chronicled . Based on the success of these two events and the high interest evinced by the technical community, we plan to regularly hold symposia on this topic on a biennial basis and the next one is slated for August 20-24, 1990 in San Diego, California. l As pointed out in the Preface to the first volume , the topic of particles on surfaces is of paramount importance in legion of technological areas. Particularly in the semiconductor device fabrication area, all signals indicate that the understanding of the behavior of particles on surfaces and their removal will attain heightened importance in the times to come. As the device dimensions are shrinking at an accelerated pace, so the benign particles of today will become the killer defects in the not too distant future. The tempo of research and development activity in the field of particles on surfaces is very high, and better and novel ways are continuously being devised to remove smaller and smaller particles.
Particles on Surfaces 2
Author: K.L. Mittal
Publisher: Springer Science & Business Media
ISBN: 1461305314
Category : Science
Languages : en
Pages : 320
Book Description
This volume documents the proceedings of the Second Symposium on Particles on Surfaces: Detection, Adhesion and Removal held as part of the 19th Annual Meeting of the Fine Particle Society in Santa Clara, California, July 20-25, 1988. The premier symposium on this topic was l organized in 1986 and has been properly chronicled . Based on the success of these two events and the high interest evinced by the technical community, we plan to regularly hold symposia on this topic on a biennial basis and the next one is slated for August 20-24, 1990 in San Diego, California. l As pointed out in the Preface to the first volume , the topic of particles on surfaces is of paramount importance in legion of technological areas. Particularly in the semiconductor device fabrication area, all signals indicate that the understanding of the behavior of particles on surfaces and their removal will attain heightened importance in the times to come. As the device dimensions are shrinking at an accelerated pace, so the benign particles of today will become the killer defects in the not too distant future. The tempo of research and development activity in the field of particles on surfaces is very high, and better and novel ways are continuously being devised to remove smaller and smaller particles.
Publisher: Springer Science & Business Media
ISBN: 1461305314
Category : Science
Languages : en
Pages : 320
Book Description
This volume documents the proceedings of the Second Symposium on Particles on Surfaces: Detection, Adhesion and Removal held as part of the 19th Annual Meeting of the Fine Particle Society in Santa Clara, California, July 20-25, 1988. The premier symposium on this topic was l organized in 1986 and has been properly chronicled . Based on the success of these two events and the high interest evinced by the technical community, we plan to regularly hold symposia on this topic on a biennial basis and the next one is slated for August 20-24, 1990 in San Diego, California. l As pointed out in the Preface to the first volume , the topic of particles on surfaces is of paramount importance in legion of technological areas. Particularly in the semiconductor device fabrication area, all signals indicate that the understanding of the behavior of particles on surfaces and their removal will attain heightened importance in the times to come. As the device dimensions are shrinking at an accelerated pace, so the benign particles of today will become the killer defects in the not too distant future. The tempo of research and development activity in the field of particles on surfaces is very high, and better and novel ways are continuously being devised to remove smaller and smaller particles.
Particles on Surfaces
Author: K.L. Mittal
Publisher: CRC Press
ISBN: 1000105261
Category : Science
Languages : en
Pages : 439
Book Description
This work comprises the proceedings of the Fourth Symposium on Particles on Surfaces. Papers cover: adhesion-induced deformations of particles on surfaces; the use of atomic force microscopy in probing particle-particle adhesion; particle contamination in microelectronics, on spacecraft, and on optical surfaces; the role of air ionization in reducing surface contamination by particles in the cleanroom; abrasive blasting media for contamination-free deburring processes; and more.;The book is intended for physical, chemical, surface and colloid chemists, materials scientists; polymers, plastics, electrical and electronics, computer, chemical and mechanical engineers; and upper-level undergraduate and graduate students in these disciplines.
Publisher: CRC Press
ISBN: 1000105261
Category : Science
Languages : en
Pages : 439
Book Description
This work comprises the proceedings of the Fourth Symposium on Particles on Surfaces. Papers cover: adhesion-induced deformations of particles on surfaces; the use of atomic force microscopy in probing particle-particle adhesion; particle contamination in microelectronics, on spacecraft, and on optical surfaces; the role of air ionization in reducing surface contamination by particles in the cleanroom; abrasive blasting media for contamination-free deburring processes; and more.;The book is intended for physical, chemical, surface and colloid chemists, materials scientists; polymers, plastics, electrical and electronics, computer, chemical and mechanical engineers; and upper-level undergraduate and graduate students in these disciplines.
Particles on Surfaces 3
Author: K.L. Mittal
Publisher: Springer Science & Business Media
ISBN: 1489923675
Category : Science
Languages : en
Pages : 319
Book Description
This volume chronicles the proceedings of the Third Symposium on Particles on Surfaces : Detection, Adhesion and Removal held as a part of the 21st Annual Meeting of the Fine Particle Society in San Diego , California, August 21 - 25 , 1990 . The first two symposia i n t h i s series were held in 1986 and 1988 , respectively, and have been properly l documented ,2. Li ke its antecedent s the Third symposium was very well received, and the continuing success of these symposia reinforced our earlier belief that regular symposia on the topic of particles on surfaces were very much needed. Concomitantly, the fourth symposium in this series is planned in Las Vegas , July 13-17 , 199 2 . l As pointed out in the Preface to the earlier two volumes ,2, the topic of particles on surfaces is of tremendous interest and concern in a wide spectrum of technological areas . The objectives of the Third symposium were es s ent i a l ly the same as those of the earlier two and our intent her e was to provide an update on the research and development activities in the world of particles on surfaces . Apropos , there has been a deliberate attempt every time to s eek out new people to present their research results and we have been very succes s f ul in this mission.
Publisher: Springer Science & Business Media
ISBN: 1489923675
Category : Science
Languages : en
Pages : 319
Book Description
This volume chronicles the proceedings of the Third Symposium on Particles on Surfaces : Detection, Adhesion and Removal held as a part of the 21st Annual Meeting of the Fine Particle Society in San Diego , California, August 21 - 25 , 1990 . The first two symposia i n t h i s series were held in 1986 and 1988 , respectively, and have been properly l documented ,2. Li ke its antecedent s the Third symposium was very well received, and the continuing success of these symposia reinforced our earlier belief that regular symposia on the topic of particles on surfaces were very much needed. Concomitantly, the fourth symposium in this series is planned in Las Vegas , July 13-17 , 199 2 . l As pointed out in the Preface to the earlier two volumes ,2, the topic of particles on surfaces is of tremendous interest and concern in a wide spectrum of technological areas . The objectives of the Third symposium were es s ent i a l ly the same as those of the earlier two and our intent her e was to provide an update on the research and development activities in the world of particles on surfaces . Apropos , there has been a deliberate attempt every time to s eek out new people to present their research results and we have been very succes s f ul in this mission.
Particles on Surfaces: Detection, Adhesion and Removal
Author: Kash L. Mittal
Publisher: CRC Press
ISBN: 9067644358
Category : Science
Languages : en
Pages : 365
Book Description
This volume chronicles the proceedings of the 9th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Philadelphia, PA, June 2004. The study of particles on surfaces is crucially important in a legion of diverse technological areas, ranging from microelectronics to biomedical to space. This volume contains a total of 21 papers covering many ramifications of particles on surfaces, ranging from detection to removal. All manuscripts were rigorously peer-reviewed and revised, and properly edited before inclusion in this book. The topics covered include: imaging and analysis of macro and nanosize particles and surface features; determination of particles on surfaces; laser inactivation on surfaces; laser-assisted nanofabrication on surfaces; post-CMP cleaning process; pre-gate cleaning; solar panel obscuration in the Martian atmosphere; adhesion and friction of microsized particles; microroughness of textile fibers and capture of particles; factors affecting particle adhesion and removal; various techniques for cleaning or removal of particles from different substrates including laser, combination of laser-induced shockwave and explosive vaporization of liquid, attenuated total internal reflection of laser light, CO2 snow, use of dense phase fluids, use of surfactants and impinging air jet; and removal of sub-100-nm particles.
Publisher: CRC Press
ISBN: 9067644358
Category : Science
Languages : en
Pages : 365
Book Description
This volume chronicles the proceedings of the 9th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Philadelphia, PA, June 2004. The study of particles on surfaces is crucially important in a legion of diverse technological areas, ranging from microelectronics to biomedical to space. This volume contains a total of 21 papers covering many ramifications of particles on surfaces, ranging from detection to removal. All manuscripts were rigorously peer-reviewed and revised, and properly edited before inclusion in this book. The topics covered include: imaging and analysis of macro and nanosize particles and surface features; determination of particles on surfaces; laser inactivation on surfaces; laser-assisted nanofabrication on surfaces; post-CMP cleaning process; pre-gate cleaning; solar panel obscuration in the Martian atmosphere; adhesion and friction of microsized particles; microroughness of textile fibers and capture of particles; factors affecting particle adhesion and removal; various techniques for cleaning or removal of particles from different substrates including laser, combination of laser-induced shockwave and explosive vaporization of liquid, attenuated total internal reflection of laser light, CO2 snow, use of dense phase fluids, use of surfactants and impinging air jet; and removal of sub-100-nm particles.
Characterization of Particles
Author: Microbeam Analysis Society
Publisher:
ISBN:
Category : Ann Arbor, MI
Languages : en
Pages : 236
Book Description
Publisher:
ISBN:
Category : Ann Arbor, MI
Languages : en
Pages : 236
Book Description
Sampling Surface and Subsurface Particle-size Distributions in Wadable Gravel- and Cobble-bed Streams for Analyses in Sediment Transport, Hydraulics, and Streambed Monitoring
Author: Kristin Bunte
Publisher:
ISBN:
Category : Bed load
Languages : en
Pages : 452
Book Description
This document provides guidance for sampling surface and subsurface sediment from wadable gravel-and cobble-bed streams. After a short introduction to streams types and classifications in gravel-bed rivers, the document explains the field and laboratory measurement of particle sizes and the statistical analysis of particle-size distributions. Analysis of particle parameters, including shape, density, and bulk density are also discussed. The document describes the spatial variability of bed-material particle sizes as well as the horizontal and vertical structure of particle deposits. The discussion of sampling procedures and equipment helps the user to make appropriate selections that support the sampling objective. Sample-size estimates may be obtained from empirical data or computed from statistical relationships between sample size and accuracy. The document explains a variety of methods, their usage and prerequisites. A detailed discussion of sampling schemes guides the user to select appropriate spatial sampling patterns necessary to produce representative samples.
Publisher:
ISBN:
Category : Bed load
Languages : en
Pages : 452
Book Description
This document provides guidance for sampling surface and subsurface sediment from wadable gravel-and cobble-bed streams. After a short introduction to streams types and classifications in gravel-bed rivers, the document explains the field and laboratory measurement of particle sizes and the statistical analysis of particle-size distributions. Analysis of particle parameters, including shape, density, and bulk density are also discussed. The document describes the spatial variability of bed-material particle sizes as well as the horizontal and vertical structure of particle deposits. The discussion of sampling procedures and equipment helps the user to make appropriate selections that support the sampling objective. Sample-size estimates may be obtained from empirical data or computed from statistical relationships between sample size and accuracy. The document explains a variety of methods, their usage and prerequisites. A detailed discussion of sampling schemes guides the user to select appropriate spatial sampling patterns necessary to produce representative samples.
Interfacial Separation of Particles
Author: Shouci Lu
Publisher: Elsevier
ISBN: 0080495451
Category : Technology & Engineering
Languages : en
Pages : 707
Book Description
Interfacial Separation of Particles is concerned with the processing and separation of fine solid particles in liquid solutions using interfacial technology.Interfacial separation has been finding wide application in many industrial fields, such as pigment and filler production, mineral processing, environmental protection, hydrometallurgy, bioengineering, food and beverage industry and chemical industry. This book describes all interfacial separation techniques and discusses the general and specific fundamentals of the techniques. The book intends to promote theoretical understanding and the more promising developments of interfacial separation technology whilst broadening the reader's background knowledge of industrial suspensions.* Is clearly written based on strong systematic science fundamentals* Provides comprehensive coverage on particle technology, mineral processing and water treatment* Includes practical examples from the different industrial fields
Publisher: Elsevier
ISBN: 0080495451
Category : Technology & Engineering
Languages : en
Pages : 707
Book Description
Interfacial Separation of Particles is concerned with the processing and separation of fine solid particles in liquid solutions using interfacial technology.Interfacial separation has been finding wide application in many industrial fields, such as pigment and filler production, mineral processing, environmental protection, hydrometallurgy, bioengineering, food and beverage industry and chemical industry. This book describes all interfacial separation techniques and discusses the general and specific fundamentals of the techniques. The book intends to promote theoretical understanding and the more promising developments of interfacial separation technology whilst broadening the reader's background knowledge of industrial suspensions.* Is clearly written based on strong systematic science fundamentals* Provides comprehensive coverage on particle technology, mineral processing and water treatment* Includes practical examples from the different industrial fields
Particles on Surfaces: Detection, Adhesion and Removal, Volume 7
Author: Kash L. Mittal
Publisher: CRC Press
ISBN: 1466562412
Category : Science
Languages : en
Pages : 462
Book Description
This volume documents the proceedings of the 7th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Newark, NJ, June 19-21, 2000. The study of particles on surfaces is extremely important in a host of diverse technological areas, ranging from microelectronics to optics to biomedical. This volume contains a total of 28 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. This volume is divided into two parts: 1) Particle Analysis and General Cleaning-Related Topics; and 2) Particle Adhesion and Removal. The topics covered include: surface analysis techniques for particle identification; cleaning, rinsing and drying issues in post-CMP cleaning; fundamental forces involved in particle adhesion; factors affecting adhesion of small (nanosize) particles; factors important in particle detachment; particle adhesion measurement by AFM; various (wet and dry) techniques for particle removal, e.g., laser, ultrasonic, megasonic, use of surfactants; toner particles and pharmaceutical particles. This volume offers a wealth of information on the tremendously technologically important field of particles on surfaces and should provide a consolidated source of current R&D activity in this arena. Therefore, it will be of value and use to anyone interested in the topic of particles on surfaces.
Publisher: CRC Press
ISBN: 1466562412
Category : Science
Languages : en
Pages : 462
Book Description
This volume documents the proceedings of the 7th International Symposium on Particles on Surfaces: Detection, Adhesion and Removal held in Newark, NJ, June 19-21, 2000. The study of particles on surfaces is extremely important in a host of diverse technological areas, ranging from microelectronics to optics to biomedical. This volume contains a total of 28 papers, which were all properly peer reviewed, revised and edited before inclusion. Therefore, this book is not merely a collection of unreviewed manuscripts, but rather represents information which has passed peer scrutiny. Furthermore, the authors were asked to update their manuscripts, so the information contained in this book should be current and fresh. This volume is divided into two parts: 1) Particle Analysis and General Cleaning-Related Topics; and 2) Particle Adhesion and Removal. The topics covered include: surface analysis techniques for particle identification; cleaning, rinsing and drying issues in post-CMP cleaning; fundamental forces involved in particle adhesion; factors affecting adhesion of small (nanosize) particles; factors important in particle detachment; particle adhesion measurement by AFM; various (wet and dry) techniques for particle removal, e.g., laser, ultrasonic, megasonic, use of surfactants; toner particles and pharmaceutical particles. This volume offers a wealth of information on the tremendously technologically important field of particles on surfaces and should provide a consolidated source of current R&D activity in this arena. Therefore, it will be of value and use to anyone interested in the topic of particles on surfaces.
Comprehensive Biomaterials II
Author: Kevin Healy
Publisher: Elsevier
ISBN: 0081006926
Category : Technology & Engineering
Languages : en
Pages : 4865
Book Description
Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications
Publisher: Elsevier
ISBN: 0081006926
Category : Technology & Engineering
Languages : en
Pages : 4865
Book Description
Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications
Colloid and Surface Science
Author: E. Wolfram
Publisher: Elsevier
ISBN: 1483153452
Category : Science
Languages : en
Pages : 115
Book Description
Colloid and Surface Science records the plenary and main lectures of the International Conference on Colloid and Surface Science, held in Budapest Hungary in September 1975. The conference discusses such topics as main factors affecting the stability of colloids; the thermodynamics of adsorption excess quantities; pore structure of solids; the effect of adsorption on the interaction between solid particles; colloid and surface chemical aspects of mesophases; and the measurement of surface tension by exact methods. Physicists and chemists specializing in colloids and surface tension will find the book very insightful.
Publisher: Elsevier
ISBN: 1483153452
Category : Science
Languages : en
Pages : 115
Book Description
Colloid and Surface Science records the plenary and main lectures of the International Conference on Colloid and Surface Science, held in Budapest Hungary in September 1975. The conference discusses such topics as main factors affecting the stability of colloids; the thermodynamics of adsorption excess quantities; pore structure of solids; the effect of adsorption on the interaction between solid particles; colloid and surface chemical aspects of mesophases; and the measurement of surface tension by exact methods. Physicists and chemists specializing in colloids and surface tension will find the book very insightful.