Author: Arthur B. Lewis (Jr.)
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages : 122
Book Description
The development of complex lifting configurations and high speed maneuvering vehicles has emphasized the need for numerical techniques to predict aerodynamic heating rates as a function of the vehicle trajectory. These numerical programs are not expected to eliminate the requirements for wind tunnel and flight testing, but will be an aid to more efficient use of experimentation time and improve confidence that all potential problem areas on the vehicle have been examined. Three programs, the Hypersonic Arbitrary Body Program, the MINIVER Program, and a third program were examined to determine their usefulness for vehicles with non-circular cross sections and large flat areas as exemplified by lifting reentry vehicles. The MINIVER code was found to be unsuitable for this; the Hypersonic Arbitrary Body Program was applicable to these shapes, but because of program limitations was used for only limited calculations. The last program also had limitations in the areas of geometry description and surface pressure calculations. Efforts were made to remove these limitations and several shapes were investigated. The ultimate goal of this effort was to extend the capabilities of one or more of the heating codes; while no effort was made to improve MINIVER or the Hypersonic Arbitrary Body Program, significant improvements were made in the last program and inviscid flow field program.
Investigation of Numerical Techniques for Predicting Aerodynamic Heating to Flight Vehicles
Author: Arthur B. Lewis (Jr.)
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages : 122
Book Description
The development of complex lifting configurations and high speed maneuvering vehicles has emphasized the need for numerical techniques to predict aerodynamic heating rates as a function of the vehicle trajectory. These numerical programs are not expected to eliminate the requirements for wind tunnel and flight testing, but will be an aid to more efficient use of experimentation time and improve confidence that all potential problem areas on the vehicle have been examined. Three programs, the Hypersonic Arbitrary Body Program, the MINIVER Program, and a third program were examined to determine their usefulness for vehicles with non-circular cross sections and large flat areas as exemplified by lifting reentry vehicles. The MINIVER code was found to be unsuitable for this; the Hypersonic Arbitrary Body Program was applicable to these shapes, but because of program limitations was used for only limited calculations. The last program also had limitations in the areas of geometry description and surface pressure calculations. Efforts were made to remove these limitations and several shapes were investigated. The ultimate goal of this effort was to extend the capabilities of one or more of the heating codes; while no effort was made to improve MINIVER or the Hypersonic Arbitrary Body Program, significant improvements were made in the last program and inviscid flow field program.
Publisher:
ISBN:
Category : Aerodynamic heating
Languages : en
Pages : 122
Book Description
The development of complex lifting configurations and high speed maneuvering vehicles has emphasized the need for numerical techniques to predict aerodynamic heating rates as a function of the vehicle trajectory. These numerical programs are not expected to eliminate the requirements for wind tunnel and flight testing, but will be an aid to more efficient use of experimentation time and improve confidence that all potential problem areas on the vehicle have been examined. Three programs, the Hypersonic Arbitrary Body Program, the MINIVER Program, and a third program were examined to determine their usefulness for vehicles with non-circular cross sections and large flat areas as exemplified by lifting reentry vehicles. The MINIVER code was found to be unsuitable for this; the Hypersonic Arbitrary Body Program was applicable to these shapes, but because of program limitations was used for only limited calculations. The last program also had limitations in the areas of geometry description and surface pressure calculations. Efforts were made to remove these limitations and several shapes were investigated. The ultimate goal of this effort was to extend the capabilities of one or more of the heating codes; while no effort was made to improve MINIVER or the Hypersonic Arbitrary Body Program, significant improvements were made in the last program and inviscid flow field program.
Scientific and Technical Aerospace Reports
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1460
Book Description
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 1460
Book Description
Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
TID.
Author:
Publisher:
ISBN:
Category : Energy development
Languages : en
Pages : 184
Book Description
Publisher:
ISBN:
Category : Energy development
Languages : en
Pages : 184
Book Description
Aeronautical Engineering
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 538
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 538
Book Description
COSMIC Software Catalog
Author:
Publisher:
ISBN:
Category : Computer software
Languages : en
Pages : 444
Book Description
Publisher:
ISBN:
Category : Computer software
Languages : en
Pages : 444
Book Description
Applied Mechanics Reviews
Author:
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 630
Book Description
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 630
Book Description
Japanese Science and Technology, 1983-1984
Author: United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1080
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 1080
Book Description
Prediction and Validation Technologies of Aerodynamic Force and Heat for Hypersonic Vehicle Design
Author: Min Zhao
Publisher: Springer Nature
ISBN: 9813365269
Category : Technology & Engineering
Languages : en
Pages : 257
Book Description
This book provides an overview of advanced prediction and verification technologies for aerodynamics and aerothermodynamics and assesses a number of critical issues in advanced hypersonic vehicle design. Focusing on state-of-the-art theories and promising technologies for engineering applications, it also presents a range of representative practical test cases. Given its scope, the book offers a valuable asset for researchers who are interested in thermodynamics, aircraft design, wind tunnel testing, fluid dynamics and aerothermodynamics research methods, introducing them to inspiring new research topics.
Publisher: Springer Nature
ISBN: 9813365269
Category : Technology & Engineering
Languages : en
Pages : 257
Book Description
This book provides an overview of advanced prediction and verification technologies for aerodynamics and aerothermodynamics and assesses a number of critical issues in advanced hypersonic vehicle design. Focusing on state-of-the-art theories and promising technologies for engineering applications, it also presents a range of representative practical test cases. Given its scope, the book offers a valuable asset for researchers who are interested in thermodynamics, aircraft design, wind tunnel testing, fluid dynamics and aerothermodynamics research methods, introducing them to inspiring new research topics.
NASA SP.
Author:
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 706
Book Description
Publisher:
ISBN:
Category : Aeronautics
Languages : en
Pages : 706
Book Description
Recent Advances in Material, Manufacturing, and Machine Learning
Author: Bjorn Schuller
Publisher: CRC Press
ISBN: 1040002439
Category : Computers
Languages : en
Pages : 1016
Book Description
The main aim of the 2nd international conference on recent advances in materials manufacturing and machine learning processes-2023 (RAMMML-23) is to bring together all interested academic researchers, scientists, engineers, and technocrats and provide a platform for continuous improvement of manufactur□ing, machine learning, design and materials engineering research. RAMMML 2023 received an overwhelm□ing response with more than 530 full paper submissions. After due and careful scrutiny, about 120 of them have been selected for presentation. The papers submitted have been reviewed by experts from renowned institutions, and subsequently, the authors have revised the papers, duly incorporating the suggestions of the reviewers. This has led to significant improvement in the quality of the contributions, Taylor & Francis publications, CRC Press have agreed to publish the selected proceedings of the conference in their book series of Advances in Mechanical Engineering and Interdisciplinary Sciences. This enables fast dissemina□tion of the papers worldwide and increases the scope of visibility for the research contributions of the authors.
Publisher: CRC Press
ISBN: 1040002439
Category : Computers
Languages : en
Pages : 1016
Book Description
The main aim of the 2nd international conference on recent advances in materials manufacturing and machine learning processes-2023 (RAMMML-23) is to bring together all interested academic researchers, scientists, engineers, and technocrats and provide a platform for continuous improvement of manufactur□ing, machine learning, design and materials engineering research. RAMMML 2023 received an overwhelm□ing response with more than 530 full paper submissions. After due and careful scrutiny, about 120 of them have been selected for presentation. The papers submitted have been reviewed by experts from renowned institutions, and subsequently, the authors have revised the papers, duly incorporating the suggestions of the reviewers. This has led to significant improvement in the quality of the contributions, Taylor & Francis publications, CRC Press have agreed to publish the selected proceedings of the conference in their book series of Advances in Mechanical Engineering and Interdisciplinary Sciences. This enables fast dissemina□tion of the papers worldwide and increases the scope of visibility for the research contributions of the authors.