Author: United States. Congress. House. Committee on Science. Subcommittee on Research
Publisher:
ISBN:
Category : Law
Languages : en
Pages : 248
Book Description
The National Earthquake Hazards Reduction Program
Author: United States. Congress. House. Committee on Science. Subcommittee on Research
Publisher:
ISBN:
Category : Law
Languages : en
Pages : 248
Book Description
Publisher:
ISBN:
Category : Law
Languages : en
Pages : 248
Book Description
NEHRP (National Earthquake Hazards Reduction Program) Recommended Seismic Provisions
Author: Fema
Publisher:
ISBN:
Category :
Languages : en
Pages : 590
Book Description
The National Earthquake Hazards Reduction Program (NEHRP) Recommended Seismic Provisions for New Buildings and Other Structures is a well-known technical resource document for improving national seismic design standards and model building codes. Each edition of the NEHRP Provisions has been developed based on the most recent advancements in earthquake engineering and research. The 2020 NEHRP Provisions continues to apply the current state-of-knowledge in earthquake engineering for improving the seismic design of buildings and other structures. It presents a set of recommended improvements to the ASCE/SEI 7-16 Standard: Minimum Design Loads and Associated Criteria for Buildings and Other Structures, and nine resource papers on new concepts, suggested future development, and technical information in support of the recommended improvements. The NEHRP Provisions is developed and evaluated through an expert-based consensus process to ensure validity and quality of the recommended new changes. It is intended primarily for use by national standards and code organizations and earthquake engineering professionals. The NEHRP Provisions is intended to support strong seismic standards and codes to bolster earthquake resilience in the nation. It has been widely recognized that code conforming new buildings increase earthquake resilience for at-risk communities. When adopting and enforcing the most recent national standards and model building codes for improving earthquake resilience, local communities expect the standards and codes to be updated and equipped with the best available new earthquake knowledge and matured technologies. The Federal Emergency Management Agency (FEMA) shares a responsibility with other NEHRP agencies under the NEHRP Reauthorization Act (P.L. 115-307) "to use research results ... support model codes that are cost effective and affordable in order to promote better practices within the design and construction industry and reduce losses from earthquakes." Consistent with this objective, FEMA is proud to support the development of the tenth editi on of the NEHRP Provisions, which has broadly reviewed and translated many recent NEHRP and private sector research results into codifiable seismic design requirements and guidelines. FEMA is grateful to the large number of experts serving on the 2020 Provisions Update Committee, Issue Teams, Project 17 Committee and its Work Groups, the member organizations of Building Seismic Safety Council (BSSC) of National Institute of Building Sciences, the BSSC Board of Direction and project managers, and NEHRP agency representatives whose dedicated and persistent efforts make the 2020 NEHRP Provisions a great success. Americans unfortunate enough to experience the earthquakes that will inevitably occur in this country in the future will owe much, perhaps even their very lives, to the contributions and dedication of these individuals for the seismic safety of buildings and other structures. Without the dedication and hard work of these men and women, this document and all it represents with respect to earthquake risk mitigation would not have been possible.
Publisher:
ISBN:
Category :
Languages : en
Pages : 590
Book Description
The National Earthquake Hazards Reduction Program (NEHRP) Recommended Seismic Provisions for New Buildings and Other Structures is a well-known technical resource document for improving national seismic design standards and model building codes. Each edition of the NEHRP Provisions has been developed based on the most recent advancements in earthquake engineering and research. The 2020 NEHRP Provisions continues to apply the current state-of-knowledge in earthquake engineering for improving the seismic design of buildings and other structures. It presents a set of recommended improvements to the ASCE/SEI 7-16 Standard: Minimum Design Loads and Associated Criteria for Buildings and Other Structures, and nine resource papers on new concepts, suggested future development, and technical information in support of the recommended improvements. The NEHRP Provisions is developed and evaluated through an expert-based consensus process to ensure validity and quality of the recommended new changes. It is intended primarily for use by national standards and code organizations and earthquake engineering professionals. The NEHRP Provisions is intended to support strong seismic standards and codes to bolster earthquake resilience in the nation. It has been widely recognized that code conforming new buildings increase earthquake resilience for at-risk communities. When adopting and enforcing the most recent national standards and model building codes for improving earthquake resilience, local communities expect the standards and codes to be updated and equipped with the best available new earthquake knowledge and matured technologies. The Federal Emergency Management Agency (FEMA) shares a responsibility with other NEHRP agencies under the NEHRP Reauthorization Act (P.L. 115-307) "to use research results ... support model codes that are cost effective and affordable in order to promote better practices within the design and construction industry and reduce losses from earthquakes." Consistent with this objective, FEMA is proud to support the development of the tenth editi on of the NEHRP Provisions, which has broadly reviewed and translated many recent NEHRP and private sector research results into codifiable seismic design requirements and guidelines. FEMA is grateful to the large number of experts serving on the 2020 Provisions Update Committee, Issue Teams, Project 17 Committee and its Work Groups, the member organizations of Building Seismic Safety Council (BSSC) of National Institute of Building Sciences, the BSSC Board of Direction and project managers, and NEHRP agency representatives whose dedicated and persistent efforts make the 2020 NEHRP Provisions a great success. Americans unfortunate enough to experience the earthquakes that will inevitably occur in this country in the future will owe much, perhaps even their very lives, to the contributions and dedication of these individuals for the seismic safety of buildings and other structures. Without the dedication and hard work of these men and women, this document and all it represents with respect to earthquake risk mitigation would not have been possible.
NEHRP Recommended Provisions for the Development of Seismic Regulations for New Buildings: Commentary
Author: Building Seismic Safety Council (U.S.)
Publisher:
ISBN:
Category : Building laws
Languages : en
Pages : 212
Book Description
Publisher:
ISBN:
Category : Building laws
Languages : en
Pages : 212
Book Description
Earthquake-Resistant Design Concepts: an Introduction to the NEHRP Recommended Seismic Provisions for New Buildings and Other Structures (FEMA P-749 / December 2010)
Author: Federal Emergency Management Agency
Publisher: Createspace Independent Pub
ISBN: 9781482079265
Category : Social Science
Languages : en
Pages : 116
Book Description
Of the 500,000 or so detectable earthquakes that occur on Planet Earth each year, people will “feel” about 100,000 of them and about 100 will cause damage. Although most earthquakes are moderate in size and destructive potential, a severe earthquake occasionally strikes a community that is not adequately prepared and thousands of lives and billions of dollars in economic investment are lost. For example, a great earthquake and the fires it initiated destroyed much of San Francisco in 1906 and a significant portion of Anchorage, Alaska, was destroyed by a large earthquake in 1964. Within the past 200 years, major destructive earthquakes also occurred in Charleston, South Carolina, and Memphis, Tennessee. Within the past 50 years, smaller but damaging earthquakes occurred several times in both Los Angeles and Seattle. Overall, more than 20 states have a moderate or high risk of experiencing damaging earthquakes. Earthquakes are truly a national problem. One of the key ways a community protects itself from potential earthquake disasters is by adopting and enforcing a building code with appropriate seismic design and construction standards. The seismic requirements in U.S. model building codes and standards are updated through the volunteer efforts of design professionals and construction industry representatives under a process sponsored by the Federal Emergency Management Agency (FEMA) and administered by the Building Seismic Safety Council (BSSC). At regular intervals, the BSSC develops and FEMA publishes the NEHRP (National Earthquake Hazards Reduction Program) Recommended Seismic Provisions for New Buildings and Other Structures (referred to in this publication as the NEHRP Recommended Seismic Provisions or simply the Provisions). The Provisions serves as a resource used by the codes and standards development organizations as they formulate sound seismic-resistant design and construction requirements. The Provisions also provides design professionals, building officials, and educators with in-depth commentary on the intent and preferred application of the seismic regulations. The 2009 edition of the Provisions (FEMA P-750) and the building codes and consensus standards based on its recommendations are, of necessity, highly technical documents intended primarily for use by design professionals and others who have specialized technical training. This introduction to the NEHRP Recommended Seismic Provisions is intended to provide these interested individuals with a readily understandable explanation of the intent of the earthquake-resistant design and requirements of the Provisions. Chapter 1 explains the history and purpose of building regulation in the United States, including the process used to develop and adopt the nation's building codes and the seismic requirements in these codes. Chapter 2 is an overview of the performance intent of the Provisions. Among the topics addressed are the national seismic hazard maps developed by the U.S. Geological Survey (USGS); the seismic design maps adopted by the Provisions as a basis for seismic design; and seismic risk, which is a function of both the probability that a community will experience intense earthquake ground shaking and the probability that building construction will suffer significant damage because of this ground motion. Chapter 3 identifies the design and construction features of buildings and other structures that are important to good seismic performance. Chapter 4 describes the various types of structures and nonstructural components addressed by the Provisions. Chapter 5 is an overview of the design procedures contained in the Provisions. Chapter 6 addresses how the practice of earthquake-resistant design is likely to evolve in the future. A glossary of key technical terms, lists of notations and acronyms used in this report, and a selected bibliography identifying references that may be of interest to some readers complete this report.
Publisher: Createspace Independent Pub
ISBN: 9781482079265
Category : Social Science
Languages : en
Pages : 116
Book Description
Of the 500,000 or so detectable earthquakes that occur on Planet Earth each year, people will “feel” about 100,000 of them and about 100 will cause damage. Although most earthquakes are moderate in size and destructive potential, a severe earthquake occasionally strikes a community that is not adequately prepared and thousands of lives and billions of dollars in economic investment are lost. For example, a great earthquake and the fires it initiated destroyed much of San Francisco in 1906 and a significant portion of Anchorage, Alaska, was destroyed by a large earthquake in 1964. Within the past 200 years, major destructive earthquakes also occurred in Charleston, South Carolina, and Memphis, Tennessee. Within the past 50 years, smaller but damaging earthquakes occurred several times in both Los Angeles and Seattle. Overall, more than 20 states have a moderate or high risk of experiencing damaging earthquakes. Earthquakes are truly a national problem. One of the key ways a community protects itself from potential earthquake disasters is by adopting and enforcing a building code with appropriate seismic design and construction standards. The seismic requirements in U.S. model building codes and standards are updated through the volunteer efforts of design professionals and construction industry representatives under a process sponsored by the Federal Emergency Management Agency (FEMA) and administered by the Building Seismic Safety Council (BSSC). At regular intervals, the BSSC develops and FEMA publishes the NEHRP (National Earthquake Hazards Reduction Program) Recommended Seismic Provisions for New Buildings and Other Structures (referred to in this publication as the NEHRP Recommended Seismic Provisions or simply the Provisions). The Provisions serves as a resource used by the codes and standards development organizations as they formulate sound seismic-resistant design and construction requirements. The Provisions also provides design professionals, building officials, and educators with in-depth commentary on the intent and preferred application of the seismic regulations. The 2009 edition of the Provisions (FEMA P-750) and the building codes and consensus standards based on its recommendations are, of necessity, highly technical documents intended primarily for use by design professionals and others who have specialized technical training. This introduction to the NEHRP Recommended Seismic Provisions is intended to provide these interested individuals with a readily understandable explanation of the intent of the earthquake-resistant design and requirements of the Provisions. Chapter 1 explains the history and purpose of building regulation in the United States, including the process used to develop and adopt the nation's building codes and the seismic requirements in these codes. Chapter 2 is an overview of the performance intent of the Provisions. Among the topics addressed are the national seismic hazard maps developed by the U.S. Geological Survey (USGS); the seismic design maps adopted by the Provisions as a basis for seismic design; and seismic risk, which is a function of both the probability that a community will experience intense earthquake ground shaking and the probability that building construction will suffer significant damage because of this ground motion. Chapter 3 identifies the design and construction features of buildings and other structures that are important to good seismic performance. Chapter 4 describes the various types of structures and nonstructural components addressed by the Provisions. Chapter 5 is an overview of the design procedures contained in the Provisions. Chapter 6 addresses how the practice of earthquake-resistant design is likely to evolve in the future. A glossary of key technical terms, lists of notations and acronyms used in this report, and a selected bibliography identifying references that may be of interest to some readers complete this report.
National Earthquake Resilience
Author: National Research Council
Publisher: National Academies Press
ISBN: 0309186773
Category : Science
Languages : en
Pages : 197
Book Description
The United States will certainly be subject to damaging earthquakes in the future. Some of these earthquakes will occur in highly populated and vulnerable areas. Coping with moderate earthquakes is not a reliable indicator of preparedness for a major earthquake in a populated area. The recent, disastrous, magnitude-9 earthquake that struck northern Japan demonstrates the threat that earthquakes pose. Moreover, the cascading nature of impacts-the earthquake causing a tsunami, cutting electrical power supplies, and stopping the pumps needed to cool nuclear reactors-demonstrates the potential complexity of an earthquake disaster. Such compound disasters can strike any earthquake-prone populated area. National Earthquake Resilience presents a roadmap for increasing our national resilience to earthquakes. The National Earthquake Hazards Reduction Program (NEHRP) is the multi-agency program mandated by Congress to undertake activities to reduce the effects of future earthquakes in the United States. The National Institute of Standards and Technology (NIST)-the lead NEHRP agency-commissioned the National Research Council (NRC) to develop a roadmap for earthquake hazard and risk reduction in the United States that would be based on the goals and objectives for achieving national earthquake resilience described in the 2008 NEHRP Strategic Plan. National Earthquake Resilience does this by assessing the activities and costs that would be required for the nation to achieve earthquake resilience in 20 years. National Earthquake Resilience interprets resilience broadly to incorporate engineering/science (physical), social/economic (behavioral), and institutional (governing) dimensions. Resilience encompasses both pre-disaster preparedness activities and post-disaster response. In combination, these will enhance the robustness of communities in all earthquake-vulnerable regions of our nation so that they can function adequately following damaging earthquakes. While National Earthquake Resilience is written primarily for the NEHRP, it also speaks to a broader audience of policy makers, earth scientists, and emergency managers.
Publisher: National Academies Press
ISBN: 0309186773
Category : Science
Languages : en
Pages : 197
Book Description
The United States will certainly be subject to damaging earthquakes in the future. Some of these earthquakes will occur in highly populated and vulnerable areas. Coping with moderate earthquakes is not a reliable indicator of preparedness for a major earthquake in a populated area. The recent, disastrous, magnitude-9 earthquake that struck northern Japan demonstrates the threat that earthquakes pose. Moreover, the cascading nature of impacts-the earthquake causing a tsunami, cutting electrical power supplies, and stopping the pumps needed to cool nuclear reactors-demonstrates the potential complexity of an earthquake disaster. Such compound disasters can strike any earthquake-prone populated area. National Earthquake Resilience presents a roadmap for increasing our national resilience to earthquakes. The National Earthquake Hazards Reduction Program (NEHRP) is the multi-agency program mandated by Congress to undertake activities to reduce the effects of future earthquakes in the United States. The National Institute of Standards and Technology (NIST)-the lead NEHRP agency-commissioned the National Research Council (NRC) to develop a roadmap for earthquake hazard and risk reduction in the United States that would be based on the goals and objectives for achieving national earthquake resilience described in the 2008 NEHRP Strategic Plan. National Earthquake Resilience does this by assessing the activities and costs that would be required for the nation to achieve earthquake resilience in 20 years. National Earthquake Resilience interprets resilience broadly to incorporate engineering/science (physical), social/economic (behavioral), and institutional (governing) dimensions. Resilience encompasses both pre-disaster preparedness activities and post-disaster response. In combination, these will enhance the robustness of communities in all earthquake-vulnerable regions of our nation so that they can function adequately following damaging earthquakes. While National Earthquake Resilience is written primarily for the NEHRP, it also speaks to a broader audience of policy makers, earth scientists, and emergency managers.
National Earthquake Hazards Reduction Program
Author:
Publisher:
ISBN:
Category : Buildings
Languages : en
Pages : 164
Book Description
Publisher:
ISBN:
Category : Buildings
Languages : en
Pages : 164
Book Description
SEAOC Blue Book
Author:
Publisher:
ISBN: 9781936039036
Category : Building laws
Languages : en
Pages : 256
Book Description
This SEAOC Blue Book: Seismic Design Recommendations is the premier publication of the SEAOC Seismology Committee. The name Blue Book is renowned worldwide among engineers, researchers, and building officials. Since 1959, the SEAOC Blue Book, previously titled Recommended Lateral Force Requirements and Commentary, has been a prescient publication of earthquake engineering. The Blue Book has been at the vanguard of earthquake engineering in California and around the world. This edition of the Blue Books offers a series of articles, that cover specific topics, some related to a particular code provision and some more general relating to an area of practice. While different than the previous editions of the Blue Books, it builds upon the tremendous effort of those who have forged earthquake engineering practice via the previous half-century of Blue Book editions. The Blue Book provides: insight and discussion of earthquake engineering concepts; interpretations of sometimes ambiguous or conflicting provisions of various codes, standards, and guidelines; and practical guidance on design implementation.
Publisher:
ISBN: 9781936039036
Category : Building laws
Languages : en
Pages : 256
Book Description
This SEAOC Blue Book: Seismic Design Recommendations is the premier publication of the SEAOC Seismology Committee. The name Blue Book is renowned worldwide among engineers, researchers, and building officials. Since 1959, the SEAOC Blue Book, previously titled Recommended Lateral Force Requirements and Commentary, has been a prescient publication of earthquake engineering. The Blue Book has been at the vanguard of earthquake engineering in California and around the world. This edition of the Blue Books offers a series of articles, that cover specific topics, some related to a particular code provision and some more general relating to an area of practice. While different than the previous editions of the Blue Books, it builds upon the tremendous effort of those who have forged earthquake engineering practice via the previous half-century of Blue Book editions. The Blue Book provides: insight and discussion of earthquake engineering concepts; interpretations of sometimes ambiguous or conflicting provisions of various codes, standards, and guidelines; and practical guidance on design implementation.
National Earthquake Hazards Reduction Program (NEHRP) Reauthoriztion
Author: United States. Congress. Senate. Committee on Commerce, Science, and Transportation. Subcommittee on Science, Technology, and Space
Publisher:
ISBN:
Category : Political Science
Languages : en
Pages : 76
Book Description
Publisher:
ISBN:
Category : Political Science
Languages : en
Pages : 76
Book Description
National Earthquake Hazards Reduction Program Reauthorization
Author: United States. Congress. House. Committee on Science. Subcommittee on Basic Research
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 264
Book Description
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 264
Book Description
A Review of the National Earthquake Hazards Reduction Program
Author: United States. Congress. House. Committee on Science, Space, and Technology (2011). Subcommittee on Research and Technology
Publisher:
ISBN:
Category : Earthquake hazard analysis
Languages : en
Pages : 172
Book Description
Publisher:
ISBN:
Category : Earthquake hazard analysis
Languages : en
Pages : 172
Book Description