Author: Mark L. Chadwick
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 246
Book Description
Natural Convection from Two-dimensional Discrete Heat Sources in a Rectangular Enclosure with and Without Venting
Author: Mark L. Chadwick
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 246
Book Description
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 246
Book Description
Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1461534747
Category : Science
Languages : en
Pages : 421
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Publisher: Springer Science & Business Media
ISBN: 1461534747
Category : Science
Languages : en
Pages : 421
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 34 (thesis year 1989) a total of 13,377 theses titles from 26 Canadian and 184 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 34 reports theses submitted in 1989, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Masters Theses in the Pure and Applied Sciences
Author: W. H. Shafer
Publisher: Plenum Publishing Corporation
ISBN: 9780306443480
Category : Education
Languages : en
Pages : 392
Book Description
Masters Theses Listed by Discipline: Aerospace Engineering. Agricultural Economics, Sciences and Engineering. Architechtural Engineering and Urban Planning. Astronomy. Astrophysics. Ceramic Engineering. Communications Engineering and Computer Science. Cryogenic Engineering. Electrical Engineering. Engineering Mechanics. Engineering Physics. Engineering Science. Fuels, Combustion, and Air Pollution. General and Environmental Engineering. Geochemistry and Soil Science. Geological Sciences and Geophysical Engineering. Geology and Earth Science. Geophysics. Industrial Engineering. Marine and Ocean Engineering. Materials Science and Engineering. Mechanical Engineering and Bioengineering. Metallurgy. Meteorology and Atmospheric Science. 17 additional disciplines. Index.
Publisher: Plenum Publishing Corporation
ISBN: 9780306443480
Category : Education
Languages : en
Pages : 392
Book Description
Masters Theses Listed by Discipline: Aerospace Engineering. Agricultural Economics, Sciences and Engineering. Architechtural Engineering and Urban Planning. Astronomy. Astrophysics. Ceramic Engineering. Communications Engineering and Computer Science. Cryogenic Engineering. Electrical Engineering. Engineering Mechanics. Engineering Physics. Engineering Science. Fuels, Combustion, and Air Pollution. General and Environmental Engineering. Geochemistry and Soil Science. Geological Sciences and Geophysical Engineering. Geology and Earth Science. Geophysics. Industrial Engineering. Marine and Ocean Engineering. Materials Science and Engineering. Mechanical Engineering and Bioengineering. Metallurgy. Meteorology and Atmospheric Science. 17 additional disciplines. Index.
Natural Convection in an Enclosure with Discrete Roughness Elements on a Vertical Heated Wall
Author:
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Natural convection flow next to a heated wall with single and repeated, two-dimensional, rectangular roughness elements is studied numerically and experimentally. The objective is to determine how these roughness elements influence heat transfer rates from the wall. Each roughness element consists of a thermally conducting, horizontal cylinder of rectangular cross section attached to the heated, isothermal wall of an enclosure. The height of roughness is on the order of the boundary layer thickness. Dye flow visualization in water confirms the numerical prediction that the steady flow over these elements does not separate. Only at high Rayleigh numbers, when the boundary layer below the roughness is unsteady, is local instantaneous flow reversal observed. Although steady flow reversals near the wall are not predicted or observed, nearly stagnant regions are formed, particularly between closely spaced cylinders. The surface heat flux in these stagnant regions is relatively low, so the total heat transfer rate may be nearly the same as for a smooth wall in spite of the increased surface area.
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Natural convection flow next to a heated wall with single and repeated, two-dimensional, rectangular roughness elements is studied numerically and experimentally. The objective is to determine how these roughness elements influence heat transfer rates from the wall. Each roughness element consists of a thermally conducting, horizontal cylinder of rectangular cross section attached to the heated, isothermal wall of an enclosure. The height of roughness is on the order of the boundary layer thickness. Dye flow visualization in water confirms the numerical prediction that the steady flow over these elements does not separate. Only at high Rayleigh numbers, when the boundary layer below the roughness is unsteady, is local instantaneous flow reversal observed. Although steady flow reversals near the wall are not predicted or observed, nearly stagnant regions are formed, particularly between closely spaced cylinders. The surface heat flux in these stagnant regions is relatively low, so the total heat transfer rate may be nearly the same as for a smooth wall in spite of the increased surface area.
Applied mechanics reviews
Author:
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 400
Book Description
Publisher:
ISBN:
Category : Mechanics, Applied
Languages : en
Pages : 400
Book Description
Natural Convection in an Enclosure with Discrete Roughness Elements on a Vertical Heated Wall
Author: Said Shakerin
Publisher:
ISBN:
Category : Dwellings
Languages : en
Pages : 9
Book Description
Natural convection flow next to a heated wall with single and repeated, two-dimensional, rectangular roughness elements is studied numerically and experimentally. The objective is to determine how these roughness elements influence heat transfer rates from the wall. Each roughness element consists of a thermally conducting, horizontal cylinder of rectangular cross section attached to the heated, isothermal wall of an enclosure. The height of roughness is on the order of the boundary layer thickness. Dye flow visualization in water confirms the numerical prediction that the steady flow over these elements does not separate. Only at high Rayleigh numbers, when the boundary layer below the roughness is unsteady, is local instantaneous flow reversal observed. Although steady flow reversals near the wall are not predicted or observed, nearly stagnant regions are formed, particularly between closely spaced cylinders. The surface heat flux in these stagnant regions is relatively low, so the total heat transfer rate may be nearly the same as for a smooth wall in spite of the increased surface area.
Publisher:
ISBN:
Category : Dwellings
Languages : en
Pages : 9
Book Description
Natural convection flow next to a heated wall with single and repeated, two-dimensional, rectangular roughness elements is studied numerically and experimentally. The objective is to determine how these roughness elements influence heat transfer rates from the wall. Each roughness element consists of a thermally conducting, horizontal cylinder of rectangular cross section attached to the heated, isothermal wall of an enclosure. The height of roughness is on the order of the boundary layer thickness. Dye flow visualization in water confirms the numerical prediction that the steady flow over these elements does not separate. Only at high Rayleigh numbers, when the boundary layer below the roughness is unsteady, is local instantaneous flow reversal observed. Although steady flow reversals near the wall are not predicted or observed, nearly stagnant regions are formed, particularly between closely spaced cylinders. The surface heat flux in these stagnant regions is relatively low, so the total heat transfer rate may be nearly the same as for a smooth wall in spite of the increased surface area.
Proceedings of the 30th 1995 National Heat Transfer Conference
Author: Alfonso Ortega
Publisher:
ISBN: 9780791817025
Category : Science
Languages : en
Pages : 172
Book Description
Publisher:
ISBN: 9780791817025
Category : Science
Languages : en
Pages : 172
Book Description
Natural Convection in Enclosures
Author: Mark Wayne Nansteel
Publisher:
ISBN:
Category :
Languages : en
Pages : 328
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 328
Book Description
Numerical Study of Natural Convection from Discrete Heat Sources in a Vertical Square Enclosure
Author: G. Refai
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Finite Analytic Solutions of Natural Convection in Two-dimensional Inclined Rectangular Enclosures
Author: Vahid Talaie
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 288
Book Description
Publisher:
ISBN:
Category : Heat
Languages : en
Pages : 288
Book Description