Author: Richard Dennis Beckert
Publisher:
ISBN:
Category : Microprocessors
Languages : en
Pages : 250
Book Description
Microprocessor-based Synchronized Dual-arm Robotic Control
Author: Richard Dennis Beckert
Publisher:
ISBN:
Category : Microprocessors
Languages : en
Pages : 250
Book Description
Publisher:
ISBN:
Category : Microprocessors
Languages : en
Pages : 250
Book Description
The Control and Simulation of a Robotic Arm Using Microprocessor-based Distributed Control Approach
Author: Adel Ghanem
Publisher:
ISBN:
Category :
Languages : en
Pages : 348
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 348
Book Description
Masters Theses in the Pure and Applied Sciences
Author: Wade H. Shafer
Publisher: Springer Science & Business Media
ISBN: 1461573912
Category : Science
Languages : en
Pages : 386
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
Publisher: Springer Science & Business Media
ISBN: 1461573912
Category : Science
Languages : en
Pages : 386
Book Description
Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thougtit that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 31 (thesis year 1986) a total of 11 ,480 theses titles trom 24 Canadian and 182 United States universities. We are sure that this broader base tor these titles reported will greatly enhance the value ot this important annual reterence work. While Volume 31 reports theses submitted in 1986, on occasion, certain univer sities do re port theses submitted in previousyears but not reported at the time.
The Design of a Microprocessor-based Controller for a Robot Arm
Author: Robert Joseph Verbiscer
Publisher:
ISBN:
Category :
Languages : en
Pages : 144
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 144
Book Description
Design of a Microprocessor-based System to Control a Robot Arm
Author: Tuck Ming Ho
Publisher:
ISBN:
Category : Microprocessors
Languages : en
Pages : 218
Book Description
Publisher:
ISBN:
Category : Microprocessors
Languages : en
Pages : 218
Book Description
Control in Robotics and Automation
Author: Bijoy K. Ghosh
Publisher: Elsevier
ISBN: 0080503071
Category : Technology & Engineering
Languages : en
Pages : 442
Book Description
Microcomputer technology and micromechanical design have contributed to recent rapid advances in Robotics. Particular advances have been made in sensor technology that allow robotic systems to gather data and react "intelligently" in flexible manufacturing systems. The analysis and recording of the data are vital to controlling the robot.In order to solve problems in control and planning for a Robotic system it is necessary to meet the growing need for the integration of sensors in to the system. Control in Robotics and Automation addresses this need. This book covers integration planning and control based on prior knowledge and real-time sensory information. A new task-oriented approach to sensing, planning and control introduces an event-based method for system design together with task planning and three dimensional modeling in the execution of remote operations.Typical remote systems are teleoperated and provide work efficiencies that are on the order of ten times slower than what is directly achievable by humans. Consequently, the effective integration of automation into teleoperated remote systems offers potential to improve remote system work efficiency. The authors introduce visually guided control systems and study the role of computer vision in autonomously guiding a robot system. Sensor-Based Planning and Control in an Event-Based Approach Visually Guided Sensing and Control Multiple Sensor Fuson in Planning and Control System Integration and Implementation Practical Applications
Publisher: Elsevier
ISBN: 0080503071
Category : Technology & Engineering
Languages : en
Pages : 442
Book Description
Microcomputer technology and micromechanical design have contributed to recent rapid advances in Robotics. Particular advances have been made in sensor technology that allow robotic systems to gather data and react "intelligently" in flexible manufacturing systems. The analysis and recording of the data are vital to controlling the robot.In order to solve problems in control and planning for a Robotic system it is necessary to meet the growing need for the integration of sensors in to the system. Control in Robotics and Automation addresses this need. This book covers integration planning and control based on prior knowledge and real-time sensory information. A new task-oriented approach to sensing, planning and control introduces an event-based method for system design together with task planning and three dimensional modeling in the execution of remote operations.Typical remote systems are teleoperated and provide work efficiencies that are on the order of ten times slower than what is directly achievable by humans. Consequently, the effective integration of automation into teleoperated remote systems offers potential to improve remote system work efficiency. The authors introduce visually guided control systems and study the role of computer vision in autonomously guiding a robot system. Sensor-Based Planning and Control in an Event-Based Approach Visually Guided Sensing and Control Multiple Sensor Fuson in Planning and Control System Integration and Implementation Practical Applications
Microprocessor Based Robotics
Author: Mark J. Robillard
Publisher: Sams Technical Publishing
ISBN:
Category : Computers
Languages : en
Pages : 228
Book Description
Teaches the Mechanics of Robot Hands, Arms, & Legs, Tactile Sensing, Motion & Attitude Sensing, & Vision Systems.
Publisher: Sams Technical Publishing
ISBN:
Category : Computers
Languages : en
Pages : 228
Book Description
Teaches the Mechanics of Robot Hands, Arms, & Legs, Tactile Sensing, Motion & Attitude Sensing, & Vision Systems.
Dual-arm Robot Control for Human-robot Collaborative Manipulation
Author: Daniel Kruse
Publisher:
ISBN:
Category :
Languages : en
Pages : 250
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages : 250
Book Description
Multi-Arm Cooperating Robots
Author: M.D. Zivanovic
Publisher: Springer Science & Business Media
ISBN: 1402042698
Category : Technology & Engineering
Languages : en
Pages : 298
Book Description
Several consistent solutions for cooperative system control have recently been identified by the authors of the current monograph. This was achieved by solving three separate tasks that are essential for solving the problem of cooperative manipulation as a whole. The first task is related to the understanding of the physical nature of cooperative manipulation and finding a way for a sufficiently exact characterization of cooperative system statics, kinematics and dynamics. After successfully completing this task, in the frame of the second task, the problem of coordinated motion of the cooperative system is solved. Finally, as a solution to the third task, the control laws of cooperative manipulation are synthesized. The starting point in dealing with the above three tasks of cooperative manipulation was the assumption that the problem of force uncertainty in cooperative manipulation can be resolved by introducing elastic properties into the cooperative system, at least in the part where force uncertainty appears. In static and dynamic analysis of the elastic structure of cooperative systems the finite element method is applied. In contrast to the procedure used in the major part of the available literature where deformation work is expressed by deviations from the unloaded state of fixed elastic structure, in this monograph the deformation work is expressed by internal forces as a function of the absolute coordinates of contacts of mobile elastic structure. Coordinated motion and control in cooperative manipulation are solved as the problem of coordinated motion and control of a mobile elastic structure, taking into account the specific features of cooperative manipulation. Coordinated motion and control laws in cooperative manipulation are synthesized on the basis of a non-linear model where the problem of uncertainty is solved, which is not the case in the available literature. Simple examples demonstrate the consistent procedure of mathematical modeling and synthesis of nominal coordinated motion, as well as control of the cooperative system. This book will be useful to a wide audience of engineers, ranging from undergraduate and graduate students, new and advanced academic researchers, to practitioners (mechanical and electrical engineers, computer and system scientists). It is intended for readers whose work involves manufacturing, industrial, robotics, automation, computer and control engineering, and who wish to find out about this important new technology and its potential advantages for control engineering applications.
Publisher: Springer Science & Business Media
ISBN: 1402042698
Category : Technology & Engineering
Languages : en
Pages : 298
Book Description
Several consistent solutions for cooperative system control have recently been identified by the authors of the current monograph. This was achieved by solving three separate tasks that are essential for solving the problem of cooperative manipulation as a whole. The first task is related to the understanding of the physical nature of cooperative manipulation and finding a way for a sufficiently exact characterization of cooperative system statics, kinematics and dynamics. After successfully completing this task, in the frame of the second task, the problem of coordinated motion of the cooperative system is solved. Finally, as a solution to the third task, the control laws of cooperative manipulation are synthesized. The starting point in dealing with the above three tasks of cooperative manipulation was the assumption that the problem of force uncertainty in cooperative manipulation can be resolved by introducing elastic properties into the cooperative system, at least in the part where force uncertainty appears. In static and dynamic analysis of the elastic structure of cooperative systems the finite element method is applied. In contrast to the procedure used in the major part of the available literature where deformation work is expressed by deviations from the unloaded state of fixed elastic structure, in this monograph the deformation work is expressed by internal forces as a function of the absolute coordinates of contacts of mobile elastic structure. Coordinated motion and control in cooperative manipulation are solved as the problem of coordinated motion and control of a mobile elastic structure, taking into account the specific features of cooperative manipulation. Coordinated motion and control laws in cooperative manipulation are synthesized on the basis of a non-linear model where the problem of uncertainty is solved, which is not the case in the available literature. Simple examples demonstrate the consistent procedure of mathematical modeling and synthesis of nominal coordinated motion, as well as control of the cooperative system. This book will be useful to a wide audience of engineers, ranging from undergraduate and graduate students, new and advanced academic researchers, to practitioners (mechanical and electrical engineers, computer and system scientists). It is intended for readers whose work involves manufacturing, industrial, robotics, automation, computer and control engineering, and who wish to find out about this important new technology and its potential advantages for control engineering applications.
A Dual Processor System for Robotic Control
Author: Mark Llewellyn Hughes
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description
Publisher:
ISBN:
Category :
Languages : en
Pages :
Book Description