Micromodels-Volume 1 PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Micromodels-Volume 1 PDF full book. Access full book title Micromodels-Volume 1 by Markus Christl. Download full books in PDF and EPUB format.
Author: Markus Christl
Publisher: Verlag für Technik und Handwerk
ISBN:
Category : Crafts & Hobbies
Languages : en
Pages : 267
Get Book Here
Book Description
On the road and off-road, on and under water and even in the air - micro models can do everything like the big ones! Since miniaturised electronic components, tiny motors and the smallest batteries have been available, it is possible to build remote-controlled models even in H0 scale. They can drive, fly or swim, can be steered, have indicators, headlights and blue lights, compete in four-wheel drive truck trials or dive in the aquarium. The authors, all pioneers of this new fascinating hobby, show here how to get from the simple conversion of a commercially available model to the realisation of a wide range of special functions to the high school of micromodelling. There are detailed building descriptions, richly illustrated with more than 200 illustrations, for a truck with rafinesses, a bulldozer with crawler tracks, a Unimog for road and rail, a landing ship, a research submarine, a twin-engine aircraft and several more. In addition, there are explanations of the basic electrical and electronic components as well as sources of supply and useful tips and tricks for the workshop - because micromodelling requires special knowledge and skills. Discover a new challenge for talented tinkerers: micromodelling!
Author: Markus Christl
Publisher: Verlag für Technik und Handwerk
ISBN:
Category : Crafts & Hobbies
Languages : en
Pages : 267
Get Book Here
Book Description
On the road and off-road, on and under water and even in the air - micro models can do everything like the big ones! Since miniaturised electronic components, tiny motors and the smallest batteries have been available, it is possible to build remote-controlled models even in H0 scale. They can drive, fly or swim, can be steered, have indicators, headlights and blue lights, compete in four-wheel drive truck trials or dive in the aquarium. The authors, all pioneers of this new fascinating hobby, show here how to get from the simple conversion of a commercially available model to the realisation of a wide range of special functions to the high school of micromodelling. There are detailed building descriptions, richly illustrated with more than 200 illustrations, for a truck with rafinesses, a bulldozer with crawler tracks, a Unimog for road and rail, a landing ship, a research submarine, a twin-engine aircraft and several more. In addition, there are explanations of the basic electrical and electronic components as well as sources of supply and useful tips and tricks for the workshop - because micromodelling requires special knowledge and skills. Discover a new challenge for talented tinkerers: micromodelling!
Author: Markus Christl
Publisher: Verlag für Technik und Handwerk
ISBN:
Category : Crafts & Hobbies
Languages : en
Pages : 206
Get Book Here
Book Description
The market for floor models is almost unmanageable, whether they are made of plastic or metal, ready-made or as a kit. But haven't you ever dreamed of making to make such a model functional? Here you will be shown how to do it. Whether it's a small tugboat, a landing craft, a tractor, a Schwimmwagen or a Unimog - there is almost no floor model that you can't breathe life into. The five authors are absolute specialists in the field of micromodels and share their tips and tricks here. Using some amazingly simple techniques, they turn plastic and metal floor models and metal models into functional models. Impressive special functions are realized on the models and thus and thus give free rein to the play instinct. From the content: • A model ship to practice on: a robust harbor tugboat • From landing craft to fire department: conversion of a military model • A barge for calm seas • VW floating car in 1:16 • Remote-controlled metal models - conversion of a Siku tractor • With all-wheel drive through the terrain - Unimog in 1:35
Author: Jerzy Witold Wiśniewski
Publisher: Springer Nature
ISBN: 303127492X
Category : Business & Economics
Languages : en
Pages : 153
Get Book Here
Book Description
Forecasting from multi-equation models has very rarely been the focus in econometric literature. In response, this book presents a range of methodologies to approach this complex field and offers readers essential information on forecasting from multi-equation econometric micromodels. In the twentieth century, significant interest in econometric macromodels emerged. These multi-equation models are mostly systems of interdependent equations, most often used to describe the national economies of various countries. The book analyzes econometric forecasting procedures and illustrates them with empirical examples that are based on real economic (mostly business-derived) data. The procedure of forecast building from systems of interdependent equations is presented for two categories of econometric models: models with a feedback effect and models with closed-loop links between interdependent variables. The forecasts obtained via this technique are compared with the results derived from reduced-form equations of the respective econometric model. The author also generalizes the rules of the reduced-recursive (helical, iterative) procedure application, against the backdrop of the proposed method of forecast building from reduced-form equations of systems of interdependent equations. Given its scope, the book will appeal not only to PhD students and researchers, but also undergraduate students and academics in general.
Author: Thorsten Feuchter
Publisher: Verlag für Technik und Handwerk
ISBN:
Category : Crafts & Hobbies
Languages : en
Pages : 420
Get Book Here
Book Description
Ships, submarines, amphibious vehicles - functional in 1:87/H0 Models in small scales are particularly fascinating - micromodels on water even more so! In this book, the four authors - most of them already known from other books on the subject of micromodels - present ships, submarines and amphibious vehicles almost completely in 1:87 scale, also known as H0. Of course, they do not limit themselves to the pure driving functions. The models in this book are packed with special functions of all kinds - by the way, many of them can also be used for models in larger scales. The technology presented here makes almost everything possible and the instructions show that a replica is also feasible with normal means. Take up the challenge and put a micro-functional model on the water! From the content • Introduction – a few thoughts in advance • Henry Morgan – a small harbour tugboat to warm up • Little helpers – simple tools with great effect • Arngast – a plastic model learns to dive • Wulf Isebrand – deep drawing technology in miniature • Soldering aid – hole grid board to help with soldering • LED – Handling LEDs in Model Making • DUKW – a ship with wheels • ROV – maximum fun with minimal effort • Calypso – a handy functional model • Hermann Marwede – conversion of a Revell - model in 1/72nd scale • Friesland – a crane ship with play value
Author: Markus Christl
Publisher: Verlag für Technik und Handwerk
ISBN:
Category : Crafts & Hobbies
Languages : en
Pages : 208
Get Book Here
Book Description
The great success of the first book on remote-controlled miniature models has encouraged the team of authors around Thorsten Feuchter to build more functional road vehicles in 1:87 scale and to describe their experiences in detail again. Their preference is for functional models such as the heavy-duty tractor with manual gearbox, the wheel loader that can do some proper excavating, and the road sweeper that will make the battery hoover superfluous for model railways in the future. In addition to teaching the basics such as the use of LEDs and muscular wire, this book is particularly concerned with the steering, switching and lighting of H0 vehicles. The solutions presented here require a well-equipped hobby workshop, but some of the projects can also be realised without a lathe or milling machine. Over 140 illustrations and numerous sketches and tables supplement the text.
Author: Owete Sunday Owete
Publisher:
ISBN:
Category : Fluid dynamics
Languages : en
Pages : 142
Get Book Here
Book Description
Author: Norman R. Morrow
Publisher: CRC Press
ISBN: 9780824783853
Category : Science
Languages : en
Pages : 468
Get Book Here
Book Description
Deals with specialized but interrelated problems in oil recovery in which the effect of interfacial behaviors is the dominant factor. Describes approaches to improving the understanding of the fundamentals of displacement, with the goal of simplifying systems sufficiently to enable measurements and
Author: Thorsten Feuchter
Publisher: Verlag für Technik und Handwerk
ISBN:
Category : Crafts & Hobbies
Languages : en
Pages : 335
Get Book Here
Book Description
Micromodels are simply fascinating! Guiding models in classic railway scale 1:87 through a matching landscape is simply fun and the little masterpieces amaze every observer. But the specialists have long since moved beyond building "normal" road and off-road vehicles – functional models are the order of the day! And so, the team of authors of this book shows models with a variety of functions from the field of forestry and agriculture. Whether forwarder or timber train with loading crane, large tractor or woodchipper – there is almost nothing that is impossible. The individual models are presented in detail and suitable for reproduction. And don't worry even for beginners, simpler models are included with which to start in this fascinating model sector – and then there are plenty of opportunities to let off steam with multifunctional models! From the content: • Looking in the rear-view mirror – Introduction • Workshop visit – What tools do I need? • Running in – A small model to warm up to • Programming the Deltang receiver • Raised – trestle crane with trolley • Now I'll help myself – A four-wheel drive Unimog from the construction kit • Attached – A woodchipper trailer • Gearbox construction • High pressure – 3D printing in a micromodel • Timber harvesting – Forwarder from the 3D printer • Charged – A tractor with simple means • LED calculation and application • Powerful – All-wheel drive and steering in the Claas Xerion • Removal – timber trailer with loading crane • Sources of supply for micromodelling
Author: Kenneth H Baum
Publisher: CRC Press
ISBN: 0429705417
Category : Science
Languages : en
Pages : 442
Get Book Here
Book Description
Microeconomic modeling has been an important tool for agricultural economists for several decades and promises to be important for ad-dressing the research problems of the 1980s as well. This volume explores the possibilities for using micromodeling to analyze how individual farm businesses react to and are affected by farm policies. Although this purpose represents only one potential use of micro-modeling, effective modeling for policy analysis necessitates a broad look from several historical, analytical, and institutional perspectives. The Micromodeling Conference held November 18-20, 1981, at Airlie House, Virginia, under the auspices of the U.S. Department of Agri-culture's Economic Research Service and the Farm Foundation reflected these concerns.
Author: Krais Moraal
Publisher: Springer Science & Business Media
ISBN: 1461333067
Category : Science
Languages : en
Pages : 484
Get Book Here
Book Description
This volume contains the proceedings of a conference held in Freiburg, West Germany, September 22-25, 1980, entitled "Manned Systems Design, New Methods and Equipment". The conference was sponsored by the Special Programme Panel on Human Factors of the Scientific Affairs Division of NATO, and supported by Panel VIII, AC/243, on "Human and Biomedical Sciences". Their sponsorship and support are gratefully acknowledged. The contributions in the book are grouped according to the main themes of the conference with special emphasis on analytical approaches, measurement of performance, and simulator design and evaluat ion. The design of manned systems covers many and highly diversified areas. Therefore, a conference under the general title of "Manned Systems Design" is rather ambitious in itself. However, scientists and engineers engaged in the design of manned systems very often are confronted with problems that can be solved only by having several disciplines working together. So it was felt that knowledge about newly developed methods and equipment, applicable in the design process, is of common and increasing interest for all those who are engaged in the design of manned systems, from the earliest con ceptual design phases until operation under real circumstances. This seems to be particularly true in view of restricted resources of manpower and energy.
