Author: Anton Bäumel
Publisher: Elsevier Publishing Company
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 1134
Get Book Here
Book Description
The first edition of Materials Data for Cyclic Loading was published in 1987. This supplementary volume has been initiated as a result of the rapid developments which are taking place in the field of materials cyclic behaviour. The basic concept of the first edition was kept fatigue data were taken from the literature and evaluated and reported in a uniform way. More than 300 new data sets with about 2300 single fatigue test results are reported. Special attention was paid to estimation formulas for cyclic materials laws.
Author: Chr. Boller
Publisher: Elsevier
ISBN: 1483193195
Category : Technology & Engineering
Languages : en
Pages : 557
Get Book Here
Book Description
Materials Data for Cyclic Loading, Part C: High-Alloy Steels provides the necessary data for a proper material assessment. The book presents the data of high-alloy steels that help estimate the crack initiation lives of structural parts. The data sheets included in the text provide the description of the material and testing procedures, along with diagrams for stress-strain curves for monotonic and cyclic loading strain life curve. The book also provides the results of stress- and strain-controlled constant amplitude tests. The text will be useful to researchers and practitioners of engineering, metallurgy, and physics.
Author: Chr Boller
Publisher:
ISBN:
Category : Science
Languages : en
Pages : 388
Get Book Here
Book Description
Based on the author's lecture notes for a course on Physical Chemistry of Oxides at High Temperatures held at the Graduate School of the Tokyo Institute of Technology, this book examines the micromechanism of migration of ions and electronic defects contained in solid and liquid oxides at high temperature. The book is primarily designed for use as a graduate-level text and includes 150 problems for students. The emphasis is on introduction of simple theories for transport properties of oxides, which can be universally used at low and high temperatures, for various combinations of oxides.
Author: Chr. Boller
Publisher: Elsevier
ISBN: 1483193209
Category : Technology & Engineering
Languages : en
Pages : 172
Get Book Here
Book Description
Materials Data for Cyclic Loading, Part D: Aluminium and Titanium Alloys presents materials data for cyclic loading which provide the basis for materials assessment by direct comparison of data or characteristic values and for estimating the crack initiation lives of aluminum and titanium alloys under constant and variable amplitude loading. The data include stress-strain curves, strain life curves, and mean stress parameter life curves for cyclic loading. Each data sheet takes up a maximum of four pages. The first page gives a description of the material and testing procedure. The chemical composition is always given in weight percent and corresponds to the values given in the literature referred to. The second and third pages show the diagrams for: stress-strain curves for monotonic and cyclic loading; strain life curve;, and mean stress (damage) parameter life curve according to the parameter of Smith, Watson and Topper. Unless indicated otherwise in the plots, the experiments were carried out at room temperature in laboratory air. The diagrams for the stress-strain relationships contain at the most three curves, one for monotonic loading and two for cyclic loading, the latter being evaluated from incremental step tests and constant amplitude tests. All three curves can be described approximately by an analytical function. This book will be of interest to materials scientists.
Author: Chr. Boller
Publisher: Elsevier
ISBN: 1483193187
Category : Technology & Engineering
Languages : en
Pages : 577
Get Book Here
Book Description
Materials Data for Cyclic Loading, Part B: Low-Alloy Steels presents materials data for cyclic loading which provide the basis for materials assessment by direct comparison of data or characteristic values and for estimating the crack initiation lives of low-alloy steels under constant and variable amplitude loading. The data include stress-strain curves, strain life curves, and mean stress parameter life curves for cyclic loading. Each data sheet takes up a maximum of four pages. The first page gives a description of the material and testing procedure. The chemical composition is always given in weight percent and corresponds to the values given in the literature referred to. The second and third pages show the diagrams for: stress-strain curves for monotonic and cyclic loading; strain life curve;, and mean stress (damage) parameter life curve according to the parameter of Smith, Watson and Topper. Unless indicated otherwise in the plots, the experiments were carried out at room temperature in laboratory air. The diagrams for the stress-strain relationships contain at the most three curves, one for monotonic loading and two for cyclic loading, the latter being evaluated from incremental step tests and constant amplitude tests. All three curves can be described approximately by an analytical function. This book will be of interest to materials scientists.
Author: Chr Boller
Publisher:
ISBN:
Category : Alloys
Languages : en
Pages : 388
Get Book Here
Book Description
Author: Hamid Jahed
Publisher: Elsevier
ISBN: 0128192941
Category : Technology & Engineering
Languages : en
Pages : 470
Get Book Here
Book Description
Cyclic Plasticity of Metals: Modeling Fundamentals and Applications provides an exhaustive overview of the fundamentals and applications of various cyclic plasticity models including forming and spring back, notch analysis, fatigue life prediction, and more. Covering metals with an array of different structures, such as hexagonal close packed (HCP), face centered cubic (FCC), and body centered cubic (BCC), the book starts with an introduction to experimental macroscopic and microscopic observations of cyclic plasticity and then segues into a discussion of the fundamentals of the different cyclic plasticity models, covering topics such as kinematics, stress and strain tensors, elasticity, plastic flow rule, and an array of other concepts. A review of the available models follows, and the book concludes with chapters covering finite element implementation and industrial applications of the various models. - Reviews constitutive cyclic plasticity models for various metals and alloys with different cell structures (cubic, hexagonal, and more), allowing for more accurate evaluation of a component's performance under loading - Provides real-world industrial context by demonstrating applications of cyclic plasticity models in the analysis of engineering components - Overview of latest models allows researchers to extend available models or develop new ones for analysis of an array of metals under more complex loading conditions
Author: Hans-Jürgen Christ
Publisher: Springer Spektrum
ISBN: 9783658245306
Category : Technology & Engineering
Languages : en
Pages : 0
Get Book Here
Book Description
This book represents the final reports of the scientific projects funded within the DFG-SPP1466 and, hence, provides the reader with the possibility to familiarize with the leading edge of VHCF research. It draws a balance on the existing knowledge and its enhancement by the joint research action of the priority program. Three different material classes are dealt with: structural metallic materials, long-fiber-reinforced polymers and materials used in micro-electro-mechanical systems. The project topics address the development of suitable experimental techniques for high-frequency testing and damage monitoring, the characterization of damage mechanisms and damage evolution, the development of mechanism-based models and the transfer of the obtained knowledge and understanding into engineering regulations and applications.
Author: I. Milne
Publisher: Elsevier
ISBN: 0080441556
Category : Technology & Engineering
Languages : en
Pages : 539
Get Book Here
Book Description
Author: Q. Jane Wang
Publisher: Springer
ISBN: 9780387928982
Category : Technology & Engineering
Languages : en
Pages : 4139
Get Book Here
Book Description
TRIBOLOGY – the study of friction, wear and lubrication – impacts almost every aspect of our daily lives. The Springer Encyclopedia of Tribology is an authoritative and comprehensive reference covering all major aspects of the science and engineering of tribology that are relevant to researchers across all engineering industries and related scientific disciplines. This is the first major reference that brings together the science, engineering and technological aspects of tribology of this breadth and scope in a single work. Developed and written by leading experts in the field, the Springer Encyclopedia of Tribology covers the fundamentals as well as advanced applications across material types, different length and time scales, and encompassing various engineering applications and technologies. Exciting new areas such as nanotribology, tribochemistry and biotribology have also been included. As a six-volume set, the Springer Encyclopedia of Tribology comprises 1630 entries written by authoritative experts in each subject area, under the guidance of an international panel of key researchers from academia, national laboratories and industry. With alphabetically-arranged entries, concept diagrams and cross-linking features, this comprehensive work provides easy access to essential information for both researchers and practicing engineers in the fields of engineering (aerospace, automotive, biomedical, chemical, electrical, and mechanical) as well as materials science, physics, and chemistry.
