Manganese in Powder Metallurgy Steels PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Manganese in Powder Metallurgy Steels PDF full book. Access full book title Manganese in Powder Metallurgy Steels by Andrej Šalak. Download full books in PDF and EPUB format.
Author: Andrej Šalak
Publisher: Springer Science & Business Media
ISBN: 190734375X
Category : Technology & Engineering
Languages : en
Pages : 488
Get Book Here
Book Description
This work in three parts presents a summary of the sintered manganese steel properties from 1948 to 2011 involving processing conditions and other characteristics. In the first and third part are given results attained by the authors based on their finding that manganese (cheapest element) during sintering evaporates and by this the vapour cleans the sintering atmospheres from humidity. The second part presents other positive properties of manganese steels in spite of the doubt of oxidation of manganese during sintering and by this excluding the sintering manganese steels what hinderd the use of manganese in production of sintered parts. All results confirm that only manganese vapour according to finding of the authors ensures effective sintering of manganese steels and parts independently on the authors mind. It follows finally from the work that manganese is possible to use for alloying of powder steels sintered also in practice in H/N atmospheres with low purity and also in pure nitrogen - cheaper than hydrogen without some of the associated problems. Current trends in the field are also presented to the reader.
Author: Andrej Šalak
Publisher: Springer Science & Business Media
ISBN: 190734375X
Category : Technology & Engineering
Languages : en
Pages : 488
Get Book Here
Book Description
This work in three parts presents a summary of the sintered manganese steel properties from 1948 to 2011 involving processing conditions and other characteristics. In the first and third part are given results attained by the authors based on their finding that manganese (cheapest element) during sintering evaporates and by this the vapour cleans the sintering atmospheres from humidity. The second part presents other positive properties of manganese steels in spite of the doubt of oxidation of manganese during sintering and by this excluding the sintering manganese steels what hinderd the use of manganese in production of sintered parts. All results confirm that only manganese vapour according to finding of the authors ensures effective sintering of manganese steels and parts independently on the authors mind. It follows finally from the work that manganese is possible to use for alloying of powder steels sintered also in practice in H/N atmospheres with low purity and also in pure nitrogen - cheaper than hydrogen without some of the associated problems. Current trends in the field are also presented to the reader.
Author: Andrej Šalak
Publisher: Cambridge Int Science Publishing
ISBN: 1898326827
Category : Technology & Engineering
Languages : en
Pages : 551
Get Book Here
Book Description
The machinability of powder metallurgy steels is poorer compared with wrought steels of appropriate composition and/or mechanical [properties. The reason for it is a larger number of material and processing variables affecting the final properties of a sintered material. Therefore the machining of powder metallurgy (PM) steels is a permanent subject of investigation and practice. The aim of the book is to make on the basis of present knowledge an overview of all interacting factors in machining process including those applied for the improvement of the machinability. There are the properties of basic plain iron and alloyed powders, various additions, compaction and sintering conditions. Effect of porosity, individual alloying elements and microstructure character is considered. The description of the basic machining processes with their characteristics and with the characteristics of the tool geometry belongs to the mentioned factors. For the improvement of machinability of PM steels different machining aids, as S, MnS, MoS2 and other are frequently used and their chemical and physical characteristics are given. The effect of various machining aids used on machinability of sintered plain iron, iron-carbon and of steels alloyed with Cu, Ni, Mo, Cr, Mn including powder forged steels with very different mechanical properties and very different microstructures is analysed and summarized. The high-speed steel, hardmetal and other tools with their geometry as the part of the cutting process are described in relation to the sintered powder materials. The recommendations for machining of various steels enclose the present knowledge about the machinability of powder metallurgy steels.
Author: Wolfgang Bleck
Publisher: MDPI
ISBN: 3039218565
Category : Technology & Engineering
Languages : en
Pages : 212
Get Book Here
Book Description
The Special Issue ‘Physical Metallurgy of High Manganese Steels’ addresses the highly fascinating class of manganese-alloyed steels with manganese contents well above 3 mass%. The book gathers manuscripts from internationally recognized researchers with stimulating new ideas and original results. It consists of fifteen original research papers. Seven contributions focus on steels with manganese contents above 12 mass%. These contributions cover fundamental aspects of process-microstrcuture-properties relationships with processes ranging from cold and warm rolling over deep rolling to heat treatment. Novel findings regarding the fatigue and fracture behavior, deformation mechanisms, and computer-aided design are presented. Additionally, the Special Issue also reflects the current trend of reduced Mn content (3-12 mass%) in advanced high strength steels (AHSS). Eight contributions were dedicated to these alloys, which are often referred to as 3rd generation AHSS, medium manganese steels or quenching and partitioning (Q&P/Q+P) steels. The interplay between advanced processing, mainly novel annealing variants, and microstructure evolution has been addressed using computational and experimental approaches. A deeper understanding of strain-rate sensitivity, hydrogen embrittlement, phase transformations, and the consequences for the materials’ properties has been developed. Hence, the topics included are manifold, fundamental-science oriented and, at the same time, relevant to industrial application.
Author: Robert Abbott Hadfield
Publisher:
ISBN:
Category : Iron-manganese alloys
Languages : en
Pages : 158
Get Book Here
Book Description
Author: Ola Bergman
Publisher:
ISBN: 9789173855778
Category :
Languages : en
Pages : 135
Get Book Here
Book Description
Author: Andrej Šalak
Publisher: Cambridge International Science Publishing
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 478
Get Book Here
Book Description
Because of the position of ferrous powder metallurgy, the author deals with the theoretical fundamentals and technical and technological aspects of the current state of knowledge in ferrous powder metallurgy so that special attention may be given to all factors influencing parts and materials with the required properties, form and dimensions, stressing their higher economic efficiency. The book also shows the extensive possibilities for further development of ferrous powder metallurgy and should therefore contribute to increasing the level of general and detailed knowledge of experts working in this area and should help in transition from fabrication of parts by conventional methods with all typical economic and ecological shortcomings to fabrication by powder metallurgy methods.
Author: Carnegie Library of Pittsburgh
Publisher:
ISBN:
Category : Manganese steel
Languages : en
Pages : 68
Get Book Here
Book Description
Author: G. S. Upadhyaya
Publisher:
ISBN: 9782901109068
Category : Manganese
Languages : en
Pages : 54
Get Book Here
Book Description
Author: Samuel Bradbury
Publisher:
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 448
Get Book Here
Book Description
Author: Robert Abbott Hadfield
Publisher: Sagwan Press
ISBN: 9781376959888
Category : History
Languages : en
Pages : 156
Get Book Here
Book Description
This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work was reproduced from the original artifact, and remains as true to the original work as possible. Therefore, you will see the original copyright references, library stamps (as most of these works have been housed in our most important libraries around the world), and other notations in the work. This work is in the public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. As a reproduction of a historical artifact, this work may contain missing or blurred pages, poor pictures, errant marks, etc. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.
