Investigation on Robust Codesign Methods for Networked Control Systems

Investigation on Robust Codesign Methods for Networked Control Systems PDF Author: Sanad Al-Areqi
Publisher: Logos Verlag Berlin GmbH
ISBN: 3832541705
Category : Mathematics
Languages : en
Pages : 184

Get Book Here

Book Description
The problem of jointly designing a robust controller and an intelligent scheduler for networked control systems (NCSs) is addressed in this thesis. NCSs composing of multiple plants that share a single channel communication network with uncertain time-varying transmission times are modeled as switched polytopic systems with additive norm-bounded uncertainty. Switching is deployed to represent scheduling, the polytopic uncertainty to overapproximatively describe the uncertain time-varying transmission times. Based on the resulting NCS model and a state feedback control law, the control and scheduling codesign problem is then introduced and formulated as a robust (minimax) optimization problem with the objective of minimizing the worst-case value of an associated infinite time-horizon quadratic cost function. Five robust codesign strategies are investigated for tackling the introduced optimization problem, namely: Periodic control and scheduling (PCS), Receding-horizon control and scheduling (RHCS), Implementation-aware control and scheduling (IACS), Event-based control and scheduling (EBCS), Prediction-based control and scheduling (PBCS). All these codesign strategies are determined from LMI optimization problems based on the Lyapunov theory. The properties of each are evaluated and compared in terms of computational complexity and control performance based on simulation and experimental study, showing their effectiveness in improving the performance while utilizing the limited communication resources very efficiently.

Investigation on Robust Codesign Methods for Networked Control Systems

Investigation on Robust Codesign Methods for Networked Control Systems PDF Author: Sanad Al-Areqi
Publisher: Logos Verlag Berlin GmbH
ISBN: 3832541705
Category : Mathematics
Languages : en
Pages : 184

Get Book Here

Book Description
The problem of jointly designing a robust controller and an intelligent scheduler for networked control systems (NCSs) is addressed in this thesis. NCSs composing of multiple plants that share a single channel communication network with uncertain time-varying transmission times are modeled as switched polytopic systems with additive norm-bounded uncertainty. Switching is deployed to represent scheduling, the polytopic uncertainty to overapproximatively describe the uncertain time-varying transmission times. Based on the resulting NCS model and a state feedback control law, the control and scheduling codesign problem is then introduced and formulated as a robust (minimax) optimization problem with the objective of minimizing the worst-case value of an associated infinite time-horizon quadratic cost function. Five robust codesign strategies are investigated for tackling the introduced optimization problem, namely: Periodic control and scheduling (PCS), Receding-horizon control and scheduling (RHCS), Implementation-aware control and scheduling (IACS), Event-based control and scheduling (EBCS), Prediction-based control and scheduling (PBCS). All these codesign strategies are determined from LMI optimization problems based on the Lyapunov theory. The properties of each are evaluated and compared in terms of computational complexity and control performance based on simulation and experimental study, showing their effectiveness in improving the performance while utilizing the limited communication resources very efficiently.

Optimal and Robust Scheduling for Networked Control Systems

Optimal and Robust Scheduling for Networked Control Systems PDF Author: Stefano Longo
Publisher: CRC Press
ISBN: 1466569557
Category : Technology & Engineering
Languages : en
Pages : 277

Get Book Here

Book Description
Optimal and Robust Scheduling for Networked Control Systems tackles the problem of integrating system components—controllers, sensors, and actuators—in a networked control system. It is common practice in industry to solve such problems heuristically, because the few theoretical results available are not comprehensive and cannot be readily applied by practitioners. This book offers a solution to the deterministic scheduling problem that is based on rigorous control theoretical tools but also addresses practical implementation issues. Helping to bridge the gap between control theory and computer science, it suggests that the consideration of communication constraints at the design stage will significantly improve the performance of the control system. Technical Results, Design Techniques, and Practical Applications The book brings together well-known measures for robust performance as well as fast stochastic algorithms to assist designers in selecting the best network configuration and guaranteeing the speed of offline optimization. The authors propose a unifying framework for modelling NCSs with time-triggered communication and present technical results. They also introduce design techniques, including for the codesign of a controller and communication sequence and for the robust design of a communication sequence for a given controller. Case studies explore the use of the FlexRay TDMA and time-triggered control area network (CAN) protocols in an automotive control system. Practical Solutions to Your Time-Triggered Communication Problems This unique book develops ready-to-use engineering tools for large-scale control system integration with a focus on robustness and performance. It emphasizes techniques that are directly applicable to time-triggered communication problems in the automotive industry and in avionics, robotics, and automated manufacturing.

Modelling and Control of an Autonomous Two-Wheeled Vehicle

Modelling and Control of an Autonomous Two-Wheeled Vehicle PDF Author: Alen Turnwald
Publisher: Logos Verlag Berlin GmbH
ISBN: 3832552057
Category : Technology & Engineering
Languages : en
Pages : 175

Get Book Here

Book Description
With respect to the future urban mobility, modern electrical bicycles, advanced motorcycles and innovative two-wheeled vehicles are arresting enormous amount of attention. Especially, model-based control and optimal trajectory planning for such vehicles are important to the research and development of the future. Therefore, a reliable and yet usable vehicle model as well as a systematic approach to motion control for two-wheeled vehicles are essential, to which this work makes a contribution. Currently available two-wheeled vehicle models are mostly either too complex to be used for a systematic control synthesis, or too simple such that the physical behaviour of the vehicle is no more represented. In this thesis, a unifying approach to modelling and control for autonomous two-wheeled vehicles is presented. The resulting model is generally valid and physically detailed enough to represent the characteristic dynamical behaviour such as the self-stability. At the same time, it is suited to a systematic control synthesis. Furthermore, the systematic extenddability, for instance by a rider, is demonstrated. The model is validated by simulations and by comparison to well-known models from the literature. The proposed vehicle model is derived in the Lagrangian and Hamiltonian framework and used for model-based optimal trajectory planning. Furthermore, a passivity-based trajectory tracking controller is designed based on the resulting port-Hamiltonian system using the so-called generalised canonical transformations. Such a controller is physically interpretable and robust against parameter uncertainties. To this end, existing approaches of passivity-based controller design are extended and adjusted for two-wheeled vehicles. Finally, a prototype two-wheeled vehicle is introduced which is used for experimental validation of the model and to demonstrate motion control algorithms for autonomous two-wheeled vehicles.

A Hybrid Physical and Data-drivApproach to Motion Prediction and Control in Human-Robot Collaboration

A Hybrid Physical and Data-drivApproach to Motion Prediction and Control in Human-Robot Collaboration PDF Author: Min Wu
Publisher: Logos Verlag Berlin GmbH
ISBN: 383255484X
Category : Technology & Engineering
Languages : en
Pages : 212

Get Book Here

Book Description
In recent years, researchers have achieved great success in guaranteeing safety in human-robot interaction, yielding a new generation of robots that can work with humans in close proximity, known as collaborative robots (cobots). However, due to the lack of ability to understand and coordinate with their human partners, the ``co'' in most cobots still refers to ``coexistence'' rather than ``collaboration''. This thesis aims to develop an adaptive learning and control framework with a novel physical and data-driven approach towards a real collaborative robot. The first part focuses on online human motion prediction. A comprehensive study on various motion prediction techniques is presented, including their scope of application, accuracy in different time scales, and implementation complexity. Based on this study, a hybrid approach that combines physically well-understood models with data-driven learning techniques is proposed and validated through a motion data set. The second part addresses interaction control in human-robot collaboration. An adaptive impedance control scheme with human reference estimation is presented. Reinforcement learning is used to find optimal control parameters to minimize a task-orient cost function without fully knowing the system dynamic. The proposed framework is experimentally validated through two benchmark applications for human-robot collaboration: object handover and cooperative object handling. Results show that the robot can provide reliable online human motion prediction, react early to human motion variation, make proactive contributions to physical collaborations, and behave compliantly in response to human forces.

Optimal and Robust Scheduling for Networked Control Systems

Optimal and Robust Scheduling for Networked Control Systems PDF Author: Stefano Longo
Publisher: CRC Press
ISBN: 1466569549
Category : Technology & Engineering
Languages : en
Pages : 280

Get Book Here

Book Description
Optimal and Robust Scheduling for Networked Control Systems tackles the problem of integrating system components—controllers, sensors, and actuators—in a networked control system. It is common practice in industry to solve such problems heuristically, because the few theoretical results available are not comprehensive and cannot be readily applied by practitioners. This book offers a solution to the deterministic scheduling problem that is based on rigorous control theoretical tools but also addresses practical implementation issues. Helping to bridge the gap between control theory and computer science, it suggests that the consideration of communication constraints at the design stage will significantly improve the performance of the control system. Technical Results, Design Techniques, and Practical Applications The book brings together well-known measures for robust performance as well as fast stochastic algorithms to assist designers in selecting the best network configuration and guaranteeing the speed of offline optimization. The authors propose a unifying framework for modelling NCSs with time-triggered communication and present technical results. They also introduce design techniques, including for the codesign of a controller and communication sequence and for the robust design of a communication sequence for a given controller. Case studies explore the use of the FlexRay TDMA and time-triggered control area network (CAN) protocols in an automotive control system. Practical Solutions to Your Time-Triggered Communication Problems This unique book develops ready-to-use engineering tools for large-scale control system integration with a focus on robustness and performance. It emphasizes techniques that are directly applicable to time-triggered communication problems in the automotive industry and in avionics, robotics, and automated manufacturing.

Control Strategies and Co-Design of Networked Control Systems

Control Strategies and Co-Design of Networked Control Systems PDF Author: Héctor Benítez-Pérez
Publisher: Springer
ISBN: 3319970445
Category : Technology & Engineering
Languages : en
Pages : 193

Get Book Here

Book Description
This book presents Networked Control System (NCS) as a particular kind of a real-time distributed system (RTDS), composed of a set of nodes, interconnected by a network, and able to develop a complete control process. It describes important parts of the control process such as sensor and actuator activities, which rely on a real-time operating system, and a real-time communication network. As the use of common bus network architecture introduces different forms of uncertainties between sensors, actuators, and controllers, several approaches such as reconfigurable systems have been developed to tackle this problem. Moreover, modeling NCS is a challenging procedure, since there are several non-linear situations, like local saturations, uncertain time delays, dead-zones, or local situations, it is necessary to deal with. The book describes a novel strategy for modelling and control based on a fuzzy control approach and codesign strategies.

Co-design Approaches to Dependable Networked Control Systems

Co-design Approaches to Dependable Networked Control Systems PDF Author: Daniel Simon
Publisher: John Wiley & Sons
ISBN: 1118620666
Category : Science
Languages : en
Pages : 261

Get Book Here

Book Description
Networked Control Systems (NCS) is a growing field of application and calls for the development of integrated approaches requiring multidisciplinary skills in control, real-time computing and communication protocols. This book describes co-design approaches, and establishes the links between the QoC (Quality of Control) and QoS (Quality of Service) of the network and computing resources. The methods and tools described in this book take into account, at design level, various parameters and properties that must be satisfied by systems controlled through a network. Among the important network properties examined are the QoC, the dependability of the system, and the feasibility of the real-time scheduling of tasks and messages. Correct exploitation of these approaches allows for efficient design, diagnosis, and implementation of the NCS. This book will be of great interest to researchers and advanced students in automatic control, real-time computing, and networking domains, and to engineers tasked with development of NCS, as well as those working in related network design and engineering fields.

Issues in Logic, Operations, and Computational Mathematics and Geometry: 2013 Edition

Issues in Logic, Operations, and Computational Mathematics and Geometry: 2013 Edition PDF Author:
Publisher: ScholarlyEditions
ISBN: 1490110119
Category : Mathematics
Languages : en
Pages : 1187

Get Book Here

Book Description
Issues in Logic, Operations, and Computational Mathematics and Geometry: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Random Structures and Algorithms. The editors have built Issues in Logic, Operations, and Computational Mathematics and Geometry: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Random Structures and Algorithms in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Logic, Operations, and Computational Mathematics and Geometry: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.

Control and Scheduling Codesign

Control and Scheduling Codesign PDF Author: Feng Xia
Publisher: Springer Science & Business Media
ISBN: 3540782559
Category : Technology & Engineering
Languages : en
Pages : 256

Get Book Here

Book Description
With emphasis on flexible resource management in networked and embedded real-time control systems operating in dynamic environments with uncertainty, this book is devoted to the integration of control with computing and communication. It covers the authors' recent and original research results within a unified framework of feedback scheduling. This useful reference also includes rich example problems, case studies, and extensive references to the literature.

Robust H∞ Team Formation Tracking Design Methods of Large-Scale UAV Networked Control Systems

Robust H∞ Team Formation Tracking Design Methods of Large-Scale UAV Networked Control Systems PDF Author: Bor-Sen Chen
Publisher: CRC Press
ISBN: 1040225365
Category : Technology & Engineering
Languages : en
Pages : 278

Get Book Here

Book Description
This book introduces the centralized robust H∞ team formation tracking control strategy of multi-unmanned aerial vehicle (multi-UAV) network system under intrinsic random fluctuation, time-varying delay and packet dropout in wireless communication, and external disturbance. A simple robust decentralized H∞ proportional-integral-derivative (PID) reference tracking network control strategy is introduced for practical applications of team formation of large-scale UAV under control saturation constraint, external disturbance, and vortex coupling. It provides practical design procedures based on linear matrix inequalities (LMIs) solvable via LMI TOOLBOX in MATLAB®. Features: Focuses on the stabilization of a QUAV under finite-time switching model control (SMC) Discusses robustness control design for formation tracking in UAV networks Introduces different robust centralized and decentralized H∞ attack-tolerant observer-based reference team formation tracking control of large-scale UAVs Reviews practical case studies in each chapter to introduce the design procedures Includes design examples of team formation of 25 quadrotor UAVs and a team formation example of five hybrid quadrotor/biped robot sub-teams This book is aimed at researchers and graduate students in control and electrical engineering.