Introduction to Microcontroller Programming for Power Electronics Control Applications PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Introduction to Microcontroller Programming for Power Electronics Control Applications PDF full book. Access full book title Introduction to Microcontroller Programming for Power Electronics Control Applications by Mattia Rossi. Download full books in PDF and EPUB format.
Author: Mattia Rossi
Publisher: CRC Press
ISBN: 100042491X
Category : Technology & Engineering
Languages : en
Pages : 452
Get Book
Book Description
develops key concepts from scratch, including a brief review of control theory and modeling strategies for power electronic-based systems focuses on the LaunchPadTM F28069M board from Texas InstrumentsTM to provide the reader some basic programming strategies proposes several control problems in terms of power management of RL and RLC loads (e.g. DC-DC converters) and closed-loop control of DC motors examines control schemes as well as the working principles of power converter topologies needed to drive the systems under investigation includes exercises while presenting a processor-in-the loop (PIL) technique to emulate the dynamics of complex systems
Author: Mattia Rossi
Publisher: CRC Press
ISBN: 100042491X
Category : Technology & Engineering
Languages : en
Pages : 452
Get Book
Book Description
develops key concepts from scratch, including a brief review of control theory and modeling strategies for power electronic-based systems focuses on the LaunchPadTM F28069M board from Texas InstrumentsTM to provide the reader some basic programming strategies proposes several control problems in terms of power management of RL and RLC loads (e.g. DC-DC converters) and closed-loop control of DC motors examines control schemes as well as the working principles of power converter topologies needed to drive the systems under investigation includes exercises while presenting a processor-in-the loop (PIL) technique to emulate the dynamics of complex systems
Author: Mattia Rossi
Publisher: CRC Press
ISBN: 9781032053035
Category :
Languages : en
Pages : 452
Get Book
Book Description
Microcontroller programming is not a trivial task. Indeed, it is necessary to set correctly the required peripherals by using programming languages like C/C++ or directly machine code. Nevertheless, MathWorks(R) developed a model-based workflow linked with an automatic code generation tool able to translate Simulink(R) schemes into executable files. This represents a rapid prototyping procedure, and it can be applied to many microcontroller boards available on the market. Among them, this introductory book focuses on the C2000 LaunchPadTM family from Texas InstrumentsTM to provide the reader basic programming strategies, implementation guidelines and hardware considerations for some power electronics-based control applications. Starting from simple examples such as turning on/off on-board LEDs, Analog-to-Digital conversion, waveform generation, or how a Pulse-Width-Modulation peripheral should be managed, the reader is guided through the settings of the specific MCU-related Simulink(R) blocks enabled for code translation. Then, the book proposes several control problems in terms of power management of RL and RLC loads (e.g., involving DC-DC converters) and closed-loop control of DC motors. The control schemes are investigated as well as the working principles of power converter topologies needed to drive the systems under investigation. Finally, a couple of exercises are proposed to check the reader's understanding while presenting a processor-in-the loop (PIL) technique to either emulate the dynamics of complex systems or testing computational performance. Thus, this book is oriented to graduate students of electrical and automation and control engineering pursuing a curriculum in power electronics and drives, as well as to engineers and researchers who want to deepen their knowledge and acquire new competences in the design and implementations of control schemes aimed to the aforementioned application fields. Indeed, it is assumed that the reader is well acquainted with fundamentals of electrical machines and power electronics, as well as with continuous-time modeling strategies and linear control techniques. In addition, familiarity with sampled-data, discrete-time system analysis and embedded design topics is a plus. However, even if these competences are helpful, they are not essential, since this book provides some basic knowledge even to whom is approaching these topics for the first time. Key concepts are developed from scratch, including a brief review of control theory and modeling strategies for power electronic-based systems.
Author: Neeraj Priyadarshi
Publisher: CRC Press
ISBN: 1000850978
Category : Technology & Engineering
Languages : en
Pages : 619
Get Book
Book Description
This book narrates an assessment of numerous advanced power converters employed on primitive phase to enhance the efficiency of power translation pertaining to renewable energy systems. It presents the mathematical modelling, analysis, and control of recent power converters topologies, namely, AC/DC, DC/DC, and DC/AC converters. Numerous advanced DC-DC Converters, namely, multi-input DC-DC Converter, Cuk, SEPIC, Zeta and so forth have been assessed mathematically using state space analysis applied with an aim to enhance power efficiency of renewable energy systems. The book: Explains various power electronics converters for different types of renewable energy sources Provides a review of the major power conversion topologies in one book Focuses on experimental analysis rather than simulation work Recommends usage of MATLAB, PSCAD, and PSIM simulation software for detailed analysis Includes DC-DC converters with reasonable peculiar power rating This book is aimed at researchers, graduate students in electric power engineering, power and industrial electronics, and renewable energy.
Author: Baris Bagci
Publisher: diplom.de
ISBN: 3954897369
Category : Technology & Engineering
Languages : en
Pages : 145
Get Book
Book Description
The purpose of this project has been to study, operate and program the 32-bit 150MIPS TMS320F2812 DSP developed by Texas Instruments Inc. In addition, it has also been a goal to implement fast estimation techniques for control of resonant converters. For this purpose, PWM signals that are generated using this DSP are used. The demands on the system and the hardware to solve the problem were already decided when I started the work. The algorithms were programmed in C/C++ language, compiled, debugged and transferred to the DSP development board in a compiling and simulation tool (downloader), called CCS (Code Composer Studio v2), also provided by Texas Instruments. In the first chapters of this study I give general information about control systems, digital signal processors, digital signal processing and the DSP used in this work. The following chapters tell about PWM, how to configure the PWM outputs and some examples related with PWM signals are given. After a short review of series resonant converters, I presented the last example implemented in this project. I conclude with a summary and provide some hints of future work.
Author: Sanjay Sharma
Publisher: Springer Nature
ISBN: 9819946344
Category : Technology & Engineering
Languages : en
Pages : 1039
Get Book
Book Description
This volume comprises peer-reviewed proceedings of the International Conference on Robotics, Control, Automation, and Artificial Intelligence (RCAAI 2022). It aims to provide a broad spectrum picture of the state of art research and development in the areas of intelligent control, the Internet of Things, machine vision, cybersecurity, robotics, circuits, and sensors, among others. This volume will provide a valuable resource for those in academia and industry.
Author: Farzin Asadi
Publisher: Morgan & Claypool Publishers
ISBN: 1636392458
Category : Technology & Engineering
Languages : en
Pages : 184
Get Book
Book Description
A microcontroller is a compact, integrated circuit designed to govern a specific operation in an embedded system. A typical microcontroller includes a processor, memory, and input/output (I/O) peripherals on a single chip. When they first became available, microcontrollers solely used Assembly language. Today, the C programming language (and some other high-level languages) can be used as well. Some of advanced microcontrollers support another programming technique as well: Graphical programming. In graphical programming, the user does not write any code but draws the block diagram of the system he wants. Then a software converts the drawn block diagram into a suitable code for the target device. Programming microcontrollers using graphical programming is quite easier than programming in C or Assembly. You can implement a complex system within hours with graphical programming while its implementation in C may take months. These features make the graphical programming an important option for engineers. This book study the graphical programming of STM32F4 high-performance microcontrollers with the aid of Simulink and Waijung blockset. Students of engineering (for instance, electrical, biomedical, mechatronics and robotic to name a few), engineers who work in industry, and anyone who want to learn the graphical programming of STM32F4 can benefit from this book. Prerequisite for this book is the basic knowledge of MATLAB Simulink.
Author: Kimmo Rauma
Publisher:
ISBN: 9789522143198
Category :
Languages : en
Pages : 88
Get Book
Book Description
Author: Julio Sanchez
Publisher: CRC Press
ISBN: 1351837818
Category : Computers
Languages : en
Pages : 911
Get Book
Book Description
From cell phones and television remote controls to automobile engines and spacecraft, microcontrollers are everywhere. Programming these prolific devices is a much more involved and integrated task than it is for general-purpose microprocessors; microcontroller programmers must be fluent in application development, systems programming, and I/O operation as well as memory management and system timing. Using the popular and pervasive mid-range 8-bit Microchip PIC® as an archetype, Microcontroller Programming offers a self-contained presentation of the multidisciplinary tools needed to design and implement modern embedded systems and microcontrollers. The authors begin with basic electronics, number systems, and data concepts followed by digital logic, arithmetic, conversions, circuits, and circuit components to build a firm background in the computer science and electronics fundamentals involved in programming microcontrollers. For the remainder of the book, they focus on PIC architecture and programming tools and work systematically through programming various functions, modules, and devices. Helpful appendices supply the full mid-range PIC instruction set as well as additional programming solutions, a guide to resistor color codes, and a concise method for building custom circuit boards. Providing just the right mix of theory and practical guidance, Microcontroller Programming: The Microchip PIC® is the ideal tool for any amateur or professional designing and implementing stand-alone systems for a wide variety of applications.
Author: Gerald Luecke
Publisher: Newnes
ISBN: 0750678100
Category : Technology & Engineering
Languages : en
Pages : 330
Get Book
Book Description
Today's control system designers face an ever-increasing "need for speed” and accuracy in their system measurements and computations. New design approaches using microcontrollers and DSP are emerging, and designers must understand these new approaches, the tools available, and how best to apply them. This practical text covers the latest techniques in microcontroller-based control system design, making use of the popular MSP430 microcontroller from Texas Instruments. The book covers all the circuits of the system, including: · Sensors and their output signals · Design and application of signal conditioning circuits · A-to-D and D-to-A circuit design · Operation and application of the powerful and popular TI MSP430 microcontroller · Data transmission circuits · System power control circuitry Written by an experienced microcontroller engineer and textbook author, the book is lavishly illustrated and includes numerous specific circuit design examples, including a fully tested and documented hands-on project using the MSP430 that makes use of the principles described. For students, engineers, technicians, and hobbyists, this practical text provides the answers you need to design modern control systems quickly and easily. Seasoned Texas Instruments designer provides a ground-up perspective on embedded control systems Pedagogical style provides a self-learning approach with examples, quizzes and review features
Author: Manuel Jiménez
Publisher: Springer Science & Business Media
ISBN: 1461431433
Category : Technology & Engineering
Languages : en
Pages : 660
Get Book
Book Description
This textbook serves as an introduction to the subject of embedded systems design, using microcontrollers as core components. It develops concepts from the ground up, covering the development of embedded systems technology, architectural and organizational aspects of controllers and systems, processor models, and peripheral devices. Since microprocessor-based embedded systems tightly blend hardware and software components in a single application, the book also introduces the subjects of data representation formats, data operations, and programming styles. The practical component of the book is tailored around the architecture of a widely used Texas Instrument’s microcontroller, the MSP430 and a companion web site offers for download an experimenter’s kit and lab manual, along with Powerpoint slides and solutions for instructors.
