Air Pollution from Motor Vehicles PDF Download
Are you looking for read ebook online? Search for your book and save it on your Kindle device, PC, phones or tablets. Download Air Pollution from Motor Vehicles PDF full book. Access full book title Air Pollution from Motor Vehicles by Asif Faiz. Download full books in PDF and EPUB format.
Author: Asif Faiz
Publisher: World Bank Publications
ISBN: 9780821334447
Category : Political Science
Languages : en
Pages : 272
Get Book Here
Book Description
Contributions by Surhid Gautam and Lit-Mian Chan. This book presents a state-of-the art review of vehicle emission standards and regulations and provides a synthesis of worldwide experience with vehicle emission control technologies and their applications in both industrial and developing countries. Topics covered include: * The two principal international systems of vehicle emission standards: those of North America and Europe * Test procedures used to verify compliance with emissions standards and to estimate actual emissions * Engine and aftertreatment technologies that have been developed to enable new vehicles to comply with emission standards, as well as the cost and other impacts of these technologies * An evaluation of measures for controlling emissions from in-use vehicles * The role of fuels in reducing vehicle emissions, the benefits that could be gained by reformulating conventional gasoline and diesel fuels, the potential benefits of alternative cleaner fuels, and the prospects for using hydrogen and electric power to run motor vehicles with ultra-low or zero emissions. This book is the first in a series of publications on vehicle-related pollution and control measures prepared by the World Bank in collaboration with the United Nations Environment Programme to underpin the Bank's overall objective of promoting transport that is environmentally sustainable and least damaging to human health and welfare.
Author: Asif Faiz
Publisher: World Bank Publications
ISBN: 9780821334447
Category : Political Science
Languages : en
Pages : 272
Get Book Here
Book Description
Contributions by Surhid Gautam and Lit-Mian Chan. This book presents a state-of-the art review of vehicle emission standards and regulations and provides a synthesis of worldwide experience with vehicle emission control technologies and their applications in both industrial and developing countries. Topics covered include: * The two principal international systems of vehicle emission standards: those of North America and Europe * Test procedures used to verify compliance with emissions standards and to estimate actual emissions * Engine and aftertreatment technologies that have been developed to enable new vehicles to comply with emission standards, as well as the cost and other impacts of these technologies * An evaluation of measures for controlling emissions from in-use vehicles * The role of fuels in reducing vehicle emissions, the benefits that could be gained by reformulating conventional gasoline and diesel fuels, the potential benefits of alternative cleaner fuels, and the prospects for using hydrogen and electric power to run motor vehicles with ultra-low or zero emissions. This book is the first in a series of publications on vehicle-related pollution and control measures prepared by the World Bank in collaboration with the United Nations Environment Programme to underpin the Bank's overall objective of promoting transport that is environmentally sustainable and least damaging to human health and welfare.
Author: National Research Council
Publisher: National Academies Press
ISBN: 0309159474
Category : Science
Languages : en
Pages : 251
Get Book Here
Book Description
Technologies and Approaches to Reducing the Fuel Consumption of Medium- and Heavy-Duty Vehicles evaluates various technologies and methods that could improve the fuel economy of medium- and heavy-duty vehicles, such as tractor-trailers, transit buses, and work trucks. The book also recommends approaches that federal agencies could use to regulate these vehicles' fuel consumption. Currently there are no fuel consumption standards for such vehicles, which account for about 26 percent of the transportation fuel used in the U.S. The miles-per-gallon measure used to regulate the fuel economy of passenger cars. is not appropriate for medium- and heavy-duty vehicles, which are designed above all to carry loads efficiently. Instead, any regulation of medium- and heavy-duty vehicles should use a metric that reflects the efficiency with which a vehicle moves goods or passengers, such as gallons per ton-mile, a unit that reflects the amount of fuel a vehicle would use to carry a ton of goods one mile. This is called load-specific fuel consumption (LSFC). The book estimates the improvements that various technologies could achieve over the next decade in seven vehicle types. For example, using advanced diesel engines in tractor-trailers could lower their fuel consumption by up to 20 percent by 2020, and improved aerodynamics could yield an 11 percent reduction. Hybrid powertrains could lower the fuel consumption of vehicles that stop frequently, such as garbage trucks and transit buses, by as much 35 percent in the same time frame.
Author: Klaus Mollenhauer
Publisher: Springer Science & Business Media
ISBN: 3540890831
Category : Technology & Engineering
Languages : en
Pages : 632
Get Book Here
Book Description
This machine is destined to completely revolutionize cylinder diesel engine up through large low speed t- engine engineering and replace everything that exists. stroke diesel engines. An appendix lists the most (From Rudolf Diesel’s letter of October 2, 1892 to the important standards and regulations for diesel engines. publisher Julius Springer. ) Further development of diesel engines as economiz- Although Diesel’s stated goal has never been fully ing, clean, powerful and convenient drives for road and achievable of course, the diesel engine indeed revolu- nonroad use has proceeded quite dynamically in the tionized drive systems. This handbook documents the last twenty years in particular. In light of limited oil current state of diesel engine engineering and technol- reserves and the discussion of predicted climate ogy. The impetus to publish a Handbook of Diesel change, development work continues to concentrate Engines grew out of ruminations on Rudolf Diesel’s on reducing fuel consumption and utilizing alternative transformation of his idea for a rational heat engine fuels while keeping exhaust as clean as possible as well into reality more than 100 years ago. Once the patent as further increasing diesel engine power density and was filed in 1892 and work on his engine commenced enhancing operating performance.
Author: Hua Zhao
Publisher: CRC Press
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 562
Get Book Here
Book Description
Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality. HCCI a.
Author: Energy Dept., Energy Information Administration
Publisher: Government Printing Office
ISBN: 9780160934827
Category : Business & Economics
Languages : en
Pages : 260
Get Book Here
Book Description
The Annual Energy Outlook 2016 presents long-term projections of energy supply, demand, and prices through 2040. The projections, focused on U.S. energy markets, are based on results from EIA's National Energy Modeling System which enables EIA to make projections under alternative, internally consistent sets of assumptions.
Author: B. T. Fijalkowski
Publisher: Springer Science & Business Media
ISBN: 9400704097
Category : Technology & Engineering
Languages : en
Pages : 585
Get Book Here
Book Description
This book presents operational and practical issues of automotive mechatronics with special emphasis on the heterogeneous automotive vehicle systems approach, and is intended as a graduate text as well as a reference for scientists and engineers involved in the design of automotive mechatronic control systems. As the complexity of automotive vehicles increases, so does the dearth of high competence, multi-disciplined automotive scientists and engineers. This book provides a discussion into the type of mechatronic control systems found in modern vehicles and the skills required by automotive scientists and engineers working in this environment. Divided into two volumes and five parts, Automotive Mechatronics aims at improving automotive mechatronics education and emphasises the training of students’ experimental hands-on abilities, stimulating and promoting experience among high education institutes and produce more automotive mechatronics and automation engineers. The main subject that are treated are: VOLUME I: RBW or XBW unibody or chassis-motion mechatronic control hypersystems; DBW AWD propulsion mechatronic control systems; BBW AWB dispulsion mechatronic control systems; VOLUME II: SBW AWS diversion mechatronic control systems; ABW AWA suspension mechatronic control systems. This volume was developed for undergraduate and postgraduate students as well as for professionals involved in all disciplines related to the design or research and development of automotive vehicle dynamics, powertrains, brakes, steering, and shock absorbers (dampers). Basic knowledge of college mathematics, college physics, and knowledge of the functionality of automotive vehicle basic propulsion, dispulsion, conversion and suspension systems is required.
Author: Society of Automotive Engineers (SAE-China)
Publisher: Springer
ISBN: 9811085064
Category : Technology & Engineering
Languages : en
Pages : 1158
Get Book Here
Book Description
This Proceedings volume gathers outstanding papers submitted to the 19th Asia Pacific Automotive Engineering Conference & 2017 SAE-China Congress, the majority of which are from China – the largest car-maker as well as most dynamic car market in the world. The book covers a wide range of automotive topics, presenting the latest technical advances and approaches to help technicians solve the practical problems that most affect their daily work.
Author: N. Kruse
Publisher: Elsevier
ISBN: 0080528619
Category : Technology & Engineering
Languages : en
Pages : 719
Get Book Here
Book Description
In spite of the energy crises and the recession, there has been a global, explosive growth in the amount of motor vehicles. In the past 50 years, the amount has increased from 50 to 700 million vehicles. For economical reasons they will probably continue to be used for a considerable number of years, despite the poor yield of internal combustion engines resulting in the inevitable production of some gaseous pollutants. The subsequent increase of gaseous pollutants in our atmosphere caused by exhaust gas from automobiles has enhanced the problem of the elimination of these pollutants produced by internal combustion engines. Catalysis has proven to be the best solution to lower the content of exhaust gas in pollutants.As its predecessors, CAPoC4 proved to be a suitable platform for discussing technological improvements and developments along with future perspectives and challenges. In the light of new results and further legislative regulations, the following topics were intensely discussed: *low light-off behaviour based on improved catalysts and substrate formulations *efficient adsorber systems for storage of hydrocarbon emissions *electrically heated catalyst systems ahead the main catalyst or, alternatively, close coupled catalysts (at the manifold of the engine) • lean DeNOx catalysts allowing for decomposition of NOx in the oxygen-rich exhaust of direct injection gasoline engines and high speed injection diesel engines or, alternatively, NOx trapping/reduction in a hybrid approach * collection and destruction of dry particulates or soot.There is no doubt that clean vehicle technology is a vital part of improving air quality. Challenges remain and call for technological answers. Catalytic air pollution control is still an area providing a considerable incentive for innovative work.
Author: Gabriele Di Blasio
Publisher: Springer Nature
ISBN: 981168751X
Category : Technology & Engineering
Languages : en
Pages : 251
Get Book Here
Book Description
This book discusses the impact of fuels characteristics and their effects on the combustion processes in internal combustion engines. It includes the analysis of a variety of biofuels (alcohol fuels and biodiesel) and biogases (natural gas, hydrogen, etc.), providing valuable information related to consequent effects on performance and emissions. The contents focus on recent results and current trends of fuel utilization in the transport sector. State-of-the-art of clean fuels application are also discussed. Thighs book will be of interest to those in academia and industry involved in fuels, IC engines, engine instrumentation, and environmental research.
Author: Akhilendra Pratap Singh
Publisher: Springer
ISBN: 9789811503702
Category : Technology & Engineering
Languages : en
Pages : 0
Get Book Here
Book Description
This book discusses the recent advances in combustion strategies and engine technologies, with specific reference to the automotive sector. Chapters discuss the advanced combustion technologies, such as gasoline direct ignition (GDI), spark assisted compression ignition (SACI), gasoline compression ignition (GCI), etc., which are the future of the automotive sector. Emphasis is given to technologies which have the potential for utilization of alternative fuels as well as emission reduction. One special section includes a few chapters for methanol utilization in two-wheelers and four wheelers. The book will serve as a valuable resource for academic researchers and professional automotive engineers alike.
