Author: K. Warwick
Publisher: IET
ISBN: 9780863411373
Category : Technology & Engineering
Languages : en
Pages : 552
Get Book Here
Book Description
Includes: Digital signals and systems. Digital controllers for process control applications. Design of digital controllers. Control of time delay systems. State-space concepts. System identification. Introduction to discrete optimal control. Multivariable control. Adaptive control. Computer aided design for industrial control systems. Reliability and redundancy in microprocessor controllers. Software and hardware aspects of industrial controller implementations. Application of distributed digital control algorithms to power stations. An expert system for process control.
Author: M. Sami Fadali
Publisher: Academic Press
ISBN: 012398324X
Category : Computers
Languages : en
Pages : 602
Get Book Here
Book Description
Digital controllers are part of nearly all modern personal, industrial, and transportation systems. Every senior or graduate student of electrical, chemical or mechanical engineering should therefore be familiar with the basic theory of digital controllers. This new text covers the fundamental principles and applications of digital control engineering, with emphasis on engineering design. Fadali and Visioli cover analysis and design of digitally controlled systems and describe applications of digital controls in a wide range of fields. With worked examples and Matlab applications in every chapter and many end-of-chapter assignments, this text provides both theory and practice for those coming to digital control engineering for the first time, whether as a student or practicing engineer. - Extensive Use of computational tools: Matlab sections at end of each chapter show how to implement concepts from the chapter - Frees the student from the drudgery of mundane calculations and allows him to consider more subtle aspects of control system analysis and design - An engineering approach to digital controls: emphasis throughout the book is on design of control systems. Mathematics is used to help explain concepts, but throughout the text discussion is tied to design and implementation. For example coverage of analog controls in chapter 5 is not simply a review, but is used to show how analog control systems map to digital control systems - Review of Background Material: contains review material to aid understanding of digital control analysis and design. Examples include discussion of discrete-time systems in time domain and frequency domain (reviewed from linear systems course) and root locus design in s-domain and z-domain (reviewed from feedback control course) - Inclusion of Advanced Topics - In addition to the basic topics required for a one semester senior/graduate class, the text includes some advanced material to make it suitable for an introductory graduate level class or for two quarters at the senior/graduate level. Examples of optional topics are state-space methods, which may receive brief coverage in a one semester course, and nonlinear discrete-time systems - Minimal Mathematics Prerequisites - The mathematics background required for understanding most of the book is based on what can be reasonably expected from the average electrical, chemical or mechanical engineering senior. This background includes three semesters of calculus, differential equations and basic linear algebra. Some texts on digital control require more
Author: Michael J. Grimble
Publisher: John Wiley & Sons
ISBN:
Category : Business & Economics
Languages : en
Pages : 726
Get Book Here
Book Description
Bridging the gap between research and industry, this volume systematically and comprehensively presents the latest advances in control and estimation. With emphasis on applications, industrial problems illustrate the use of transfer function and state space methods for modelling and design. Combining theroy with practice, Industrial Control Systems Design will appeal to practising engineers and academic researchers in control engineering. This unique reference: * spans fundamental state space and polynomial systems theory and introduces quantitative feedback theory. * Includes design case studies with illustrative problem descriptions and analysis from the steel, marine, process control, aerospace and power generation sectors. * Focuses on the challenges in predictive optimal control, now an indispensable method in advanced control applications. * Provides an introduction to safety-critical control systems design and combined fault monitoring and control techniques. * Discusses the design of LQG and H-controllers with several degrees of freedom, including feedback, tracking and feedforward functions.
Author: Peng Zhang
Publisher: William Andrew
ISBN: 0815519664
Category : Technology & Engineering
Languages : en
Pages : 891
Get Book Here
Book Description
This handbook gives comprehensive coverage of all kinds of industrial control systems to help engineers and researchers correctly and efficiently implement their projects. It is an indispensable guide and references for anyone involved in control, automation, computer networks and robotics in industry and academia alike. Whether you are part of the manufacturing sector, large-scale infrastructure systems, or processing technologies, this book is the key to learning and implementing real time and distributed control applications. It covers working at the device and machine level as well as the wider environments of plant and enterprise. It includes information on sensors and actuators; computer hardware; system interfaces; digital controllers that perform programs and protocols; the embedded applications software; data communications in distributed control systems; and the system routines that make control systems more user-friendly and safe to operate. This handbook is a single source reference in an industry with highly disparate information from myriad sources. - Helps engineers and researchers correctly and efficiently implement their projects - An indispensable guide and references for anyone involved in control, automation, computer networks and robotics - Equally suitable for industry and academia
Author: R. Isermann
Publisher: Springer Science & Business Media
ISBN: 3662023199
Category : Technology & Engineering
Languages : en
Pages : 583
Get Book Here
Book Description
The great advances made in large-scale integration of semiconductors, the resulting cost-effective digital processors and data storage devi ces, and the development of suitable programming techniques are all having increasing influence on the techniques of measurement and con trol and on automation in general. The application of digital techni ques to process automation started in about 1960 when the first process computer was installed. From about 1970 computers have become standard equipment for the automation of industrial processes, connected on-line in open or closed loop. The annual increase of installed process compu ters in the last decade was about 20- 30 %. The cost of hardware has shown a tendency to decrease, whereas the relative cost of user soft ware has tended to increase. Because of the relatively high total cost, the first phase of digital computer application to process control is characterized by the centralization of many functions in a single (though sometimes in several) process computer. Such centralization does not permit full utilization of the many advantages of digital signal processing and rapid economic pay-off as analog back-up systems or parallel standby computers must often be provided to cover possible breakdowns in the central computer. In 1971 the first microprocessors were marketed which, together with large-scale integrated semiconductor memory units and input/output mo dules, can be assembled into more cost-effective process microcompu ters.
Author: James R. Leigh
Publisher: Prentice Hall
ISBN:
Category : Technology & Engineering
Languages : en
Pages : 442
Get Book Here
Book Description
Good,No Highlights,No Markup,all pages are intact, Slight Shelfwear,may have the corners slightly dented, may have slight color changes/slightly damaged spine.
Author: Ioan Doré Landau
Publisher: Springer Science & Business Media
ISBN: 1846280567
Category : Technology & Engineering
Languages : en
Pages : 497
Get Book Here
Book Description
The extraordinary development of digital computers (microprocessors, microcontrollers) and their extensive use in control systems in all fields of applications has brought about important changes in the design of control systems. Their performance and their low cost make them suitable for use in control systems of various kinds which demand far better capabilities and performances than those provided by analog controllers. However, in order really to take advantage of the capabilities of microprocessors, it is not enough to reproduce the behavior of analog (PID) controllers. One needs to implement specific and high-performance model based control techniques developed for computer-controlled systems (techniques that have been extensively tested in practice). In this context identification of a plant dynamic model from data is a fundamental step in the design of the control system. The book takes into account the fact that the association of books with software and on-line material is radically changing the teaching methods of the control discipline. Despite its interactive character, computer-aided control design software requires the understanding of a number of concepts in order to be used efficiently. The use of software for illustrating the various concepts and algorithms helps understanding and rapidly gives a feeling of the various phenomena.
Author: Peng Zhang
Publisher: William Andrew
ISBN: 1437778089
Category : Science
Languages : en
Pages : 866
Get Book Here
Book Description
Control engineering seeks to understand physical systems, using mathematical modeling, in terms of inputs, outputs and various components with different behaviors. It has an essential role in a wide range of control systems, from household appliances to space flight. This book provides an in-depth view of the technologies that are implemented in most varieties of modern industrial control engineering. A solid grounding is provided in traditional control techniques, followed by detailed examination of modern control techniques such as real-time, distributed, robotic, embedded, computer and wireless control technologies. For each technology, the book discusses its full profile, from the field layer and the control layer to the operator layer. It also includes all the interfaces in industrial control systems: between controllers and systems; between different layers; and between operators and systems. It not only describes the details of both real-time operating systems and distributed operating systems, but also provides coverage of the microprocessor boot code, which other books lack. In addition to working principles and operation mechanisms, this book emphasizes the practical issues of components, devices and hardware circuits, giving the specification parameters, install procedures, calibration and configuration methodologies needed for engineers to put the theory into practice. - Documents all the key technologies of a wide range of industrial control systems - Emphasizes practical application and methods alongside theory and principles - An ideal reference for practicing engineers needing to further their understanding of the latest industrial control concepts and techniques
Author: Tyson Macaulay
Publisher: CRC Press
ISBN: 1466516119
Category : Business & Economics
Languages : en
Pages : 207
Get Book Here
Book Description
As industrial control systems (ICS), including SCADA, DCS, and other process control networks, become Internet-facing, they expose crucial services to attack. Threats like Duqu, a sophisticated worm found in the wild that appeared to share portions of its code with the Stuxnet worm, emerge with increasing frequency. Explaining how to develop and im
Author: Donald A. Coggan
Publisher: ISA
ISBN: 9781556178634
Category : Automatic control
Languages : en
Pages : 0
Get Book Here
Book Description
True to its role as the introductory volume to the Practical Guides series, the focus of this text is on application. There are 15 chapters by 11 authors on the following: sensors, analytical instrumentation, chemical process control, final control elements, computer technology, control system theory, analog and digital control devices, distributed control systems and automation systems, programmable logic controllers, ergonomics and occupational safety, and project management strategies. In addition, three appendices are included, on laboratory standards, the basics of electricity and electronics, and the basics of chemistry. New to the second edition is a thorough revision of the text, with updated information on Internet communications, open systems, wireless networks, and other topics. The included CD-ROM contains a complete copy of the text. Annotation : 2004 Book News, Inc., Portland, OR (booknews.com).
